• 디지털융복합연구
• /
• 제12권2호
• /
• pp.69-78
• /
• 2014

본 연구는 디지털 미디어 리터러시 격차의 현황과 원인을 리터러시의 세부요인을 중심으로 탐구하는데 목적이 있다. 특히 세대와 경제수준 변인이 디지털 미디어 리터러시의 세부요인별로 어떠한 격차를 발생시키는지를 실증적 데이터를 중심으로 분석하였다. 어린이, 청소년, 성인, 고연령층에 이르는 미디어 이용자 총 2,171명을 대상으로 실시한 설문조사 결과, 세대간 집단 차이는 디지털 미디어 리터러시의 8개 세부요인에 따라 각각 상이한 양상을 보였다. 경제수준 역시 격차에 영향을 미치는 요인으로 분석되었으나, 세대 변인과의 상호작용 효과에 의해, 성인집단에서만 유의미한 차이를 갖는 것으로 나타났다. 이러한 분석결과를 바탕으로 디지털 미디어 리터러시 격차를 해소하기 위한 정책방안을 제시하였다.

• Journal of Plant Biotechnology
• /
• 제43권4호
• /
• pp.411-416
• /
• 2016

NGS 기술은 전체 게놈 시퀀싱 및 reference 게놈에 alignment에 의해 돌연변이 표현형에 관련된 돌연변이 식별에 이용한다. 그러나 품종 및 계통들을 resequence 하였을 경우 기존의 reference 게놈에 구조적 변이가 보이며, reference와 맞지 않는 게놈지역에서 돌연변이들은 단순한 alignment로 찾을 수 없다. 본 리뷰에서는 NGS 기술을 이용하여 돌연변이체로부터 변이 관련 유전자를 식별하는 MutMap, MutMap-Gap 및 MutMap+ 방법을 기술하였고 지금까지의 연구현황에 대해 기술하였다. 아울러 이들 방법은 nucleotide-binding site-leucine rich repeat (NBS-LRR) 그룹들의 병 저항성 유전자와 같이 구조적 변이를 가진 유전자를 분리하는 등 유용성에 대해 고찰하였다.

• Advances in Energy Research
• /
• 제5권2호
• /
• pp.91-105
• /
• 2017

Thermal hydraulic (TH) analysis of nuclear power reactors is utmost important. In this way, the numerical codes that preparing TH data in reactor core are essential. In this paper, a subchannel analysis of a Russian pressurized water reactor (WWER1000) core with enhanced numerical code is carried out. For this, in fluid domain, the mass, axial and lateral momentum and energy conservation equations for desired control volume are solved, numerically. In the solid domain, the cylindrical heat transfer equation for calculation of radial temperature profile in fuel, gap and clad with finite difference and finite element solvers are considered. The dependence of material properties to fuel burnup with Calza-Bini fuel-gap model is implemented. This model is coupled with Isotope Generation and Depletion Code (ORIGEN2.1). The possibility of central hole consideration in fuel pellet is another advantage of this work. In addition, subchannel to subchannel and subchannel to rod connection data in hexagonal fuel assembly geometry could be prepared, automatically. For a demonstration of code capability, the steady state TH analysis of a the WWER1000 core is compromised with Thermal-hydraulic analysis code (COBRA-EN). By thermal hydraulic parameters averaging Fuel Assembly-to-Fuel Assembly method, the one sixth (symmetry) of the Boushehr Nuclear Power Plant (BNPP) core with regular subchannels are modeled. Comparison between the results of the work and COBRA-EN demonstrates some advantages of the presented code. Using the code the thermal modeling of the fuel rods with considering the fission gas generation would be possible. In addition, this code is compatible with neutronic codes for coupling. This method is faster and more accurate for symmetrical simulation of the core with acceptable results.

• 임상간호연구
• /
• 제18권2호
• /
• pp.215-227
• /
• 2012

Purpose: This study was conducted to examine clinical nurses' perceptions on the nursing organizational culture and investigate the differences in their perceptions according to age groups in South Korea. Methods: Participants were 1,087 nurses from 25 general hospitals in South Korea. Data were collected from July 29 to September 30 in 2011, and were analyzed using descriptive statistics, ANOVA with $Scheff{\grave{e}}$ test, and factor analysis. Results: Nurses perceived nursing as an excellent professional job which progresses continually. Autonomy and individualized reward to their professional work, however, were reported not-satisfactory to them. They agreed that nurses are punctual, polite, honest, and responsible, while disagreeing in competitiveness. There were differences in perceiving cultural factors according to age groups. The subjects in their over 40s perceived 'professionalism', 'normative', 'strictness', 'rightfulness', and 'community spirit' strongly, while nurses in their 20s perceived 'conservatism' highly. Also, nurses' perception on the organizational commitment and job satisfaction were high in over 40s while turnover intention was high in other groups. Conclusion: Nurse managers need to assess the perception on nursing organizational culture in order to improve nursing work environment better. In addition, it is necessary to take into account seriously the generation gap to build supportive nursing organizational culture.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.435-440
• /
• 2002

In this study, we have investigated photo-induced changes of optical energy gap( $E_{OP)}$ and photoluminescence (PL) in amorphous ($\alpha$-) S $e_{100-x}$G $e_{x}$ (x=5, 25 and 33) thin films prepared by conventional thermal evaporation method. In the $\alpha$-S $e_{100-x}$G $e_{x}$ thin film, the $E_{OP}$ is obtained by a linear extrapolation of the ($\alpha$hν)$^{\frac{1}{2}}$ versus hν plot to the energy axis using the optical absorption coefficient ($\alpha$) calculated from the extinction coefficient k measured in the wavelength range of 290~900nm. Although the values of $\Delta$ $E_{OP}$ are very different, all films exhibit photo-induced photo-darkening (PD) effect that is a red shift of $E_{OP}$ . In particular, $\Delta$ $E_{OP}$ in $\alpha$-S $e_{75}$ G $e_{25}$ thin film exhibits the largest value (i, e., $\Delta$ $E^{OP}$ ~40meV for $\alpha$-S $e_{95}$ G $e_{5}$ , $\Delta$ $E_{OP}$ ~200meV for $\alpha$-S $e_{75}$ G $e_{25}$ , $\Delta$ $E_{OP}$ ~130meV for $\alpha$-S $e_{67}$ G $e_{33}$ ). PL spectra in $\alpha$-SeGe by hν$_{HeCd}$ have no-Stokes shift (SS) and show a tendency dependent on both composition and illumination time. We explain the energy-induced phenomena such as the PD and thermal bleaching, the native charged-defect generation and the no-SS PL, etc..the PD and thermal bleaching, the native charged-defect generation and the no-SS PL, etc..tc..

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.105-110
• /
• 2009

The On Line Electric Vehicles(OLEV) that can pick up inductive power from underground coils on driving with high efficiency have been developed this year, and is now proposed in this paper. The IPS(Inductive Power Supply) system consists of power supply inverters, power supply rails, pick up modules, and a regulator. There are 3 generations of IPS have been developed so far, and the $4^{th}$ generation IPS is being developed. The $1^{st}$ generation has been demonstrated this Feb. 27, which is equipped with mechanically auto tracking pick-up module with 1cm air gap, and showed 80% power efficiency. The $2^{nd}$ generation IPS applied to an 120kW (average)/240kW(peak) motor powered electric bus has 17cm air gap with 72% power efficiency. For the $2^{nd}$ generation IPS, the Power supply inverter has 440V, 3phase input and 200A @ 20kHz output. The test power supply rail of 240m long is segmented by 60m each, where newly developed core structure and power cable are constructed under the road covered with asphalt of 5cm thickness. The pick-up modules which consist of core, winding wire, and rectifiers are fixed to the bottom of the bus which can carry more than 40 passengers and can pick up max. 60kW. To remove parasitic component and to transfer maximum power between them resonant circuit topology is applied to the primary and secondary sides. The EMF level is below 62.5mG at 1.75m from the center of the road to meet the regulation. Several effective ways of reducing EMF levels have been developed. In addition, effective ways to solve problems related high frequency power cables buried in ground and it's proof from soil have been studied also. This development shows that the IPS system is capable of supplying enough power to the pick-up of OLEV and can reduce battery size, weight and cost, which means the IPS with OLEV is one of the best candidate for EV.

• 인터넷정보학회논문지
• /
• 제10권1호
• /
• pp.145-158
• /
• 2009

인터넷과 관련 정보기술의 비약적인 발전만큼 우리에게 새로운 도전과 성장의 기회를 제공한 적은 없다. 정보는 엄청난 속도로 전파되고 관련 기술 역시 그에 걸맞는 속도로 발전하고 있다. 그러나 사회가 이처럼 ICT(Information & Communication Technology)에 의존하는 경향이 짙어지면서 노인(실버) 세대의 삶의 질은 오히려 저하되고 있는 것처럼 보인다. 어떤 일이 벌어지고 있는지, 어떤 기회가 있는지 등에 대한 정보에 편하게 접할 수 있으며 기존의 관행에 비해 새로운 대안이 나올 때 이를 손쉽게 이용할 수 있는 기회가 제공되어야 인생이 재미있다. 본 논문은 노인들의 인터넷 이용 및 접근에 대한 영향요인을 식별 평가하는데 주요 목적이 있다. 인터넷의 이용용이성 인터넷에 대한 유용성인식정도 자기효능감, 스트레스, 세대 간 갈등, 소득 등을 주요 변수로 설정하고 이를 테스트한다. 58세 이상의 노인 28명에 설문을 돌려 모형을 검증한 결과, 유용성와 용이성은 사용의도에 영향을 미치며, 자기효능감과 세대 간 갈등도 유용성에 다소 영향을 미치는 것으로 나타났으나 스트레스와 수입은 유용성과는 무관한 것으로 나타났다. 그렇지만 자기효능감과 수입은 용이성에 영향을 미치는 것으로 판단된다. 이외에도 실버세대의 인터넷 교육에 대한 몇 가지 제안도 논문 말미에 포함시켰다.

• 유기물자원화
• /
• 제16권4호
• /
• pp.82-90
• /
• 2008

돼지의 분뇨 발생량을 측정한 결과, 3계절과 생체 중량을 고려한 평균 분뇨 발생량은 분이 1.49kg/head/d, 뇨가 3.08kg/head/d로서 총 4.57kg/head/d가 발생하였다. 오염물질 항목별 발생부하 원단위는 BOD 199.5g/head/d, CODCr 413.5g/head/d, 총질소 27.8g/head/d, 총인이 5.3g/head/d로서 BOD를 제외한 기타 오염물질의 발생부하 원단위는 기존 문헌상의 값과 유사하게 나타났다. 한우의 경우 분 발생량은 10.9kg/head/day 뇨 발생량은 3.3kg/head/day 으로 조사되어 농림부(2000)의 조사결과보다 다소 적게 나타났다. 젖소의 경우 분 발생량은 24.6L/head/day 로 다른 기관과는 차이가 났지만, 환경부(2006)의 자료와는 비슷하게 나타났으며, 뇨 발생량은 10.5L/head/day 로 농림부(2000)와 축산기술연구소(2000)보다는 높았지만, 환경부(2006)와 국립환경연구원(1986)과 한국과학기술원(1990)보다는 다소 낮게 조사되었다. 닭의 오염물질 배출량 및 농도분석 원단위를 통하여 산출된 배출부하 원단위는 사육두수 및 사료의 종류, 분의 처리방법의 상이함에 의해 산란계에서 높게 나타난 것으로 판단된다. 배출부하 원단위 중 사슴의 경우 기존의 문헌보다 높게 측정된 것은 사슴의 축종별 체중과 오염물질 발생량의 차이에 의한 것으로 판단된다.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.925-936
• /
• 2003

The manipulability analysis of the parallel-type rolling mill proposed in Hong et al. [1] is re-visited. The parallel rolling mill uses two Stewart platforms in opposite direction for the generation of 6 degree-of-freedom motions of each roll. The objective of this new parallel rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of rolls, and tension of the strip. New forward/inverse kinematics problems, in contrast with [1], are formulated. The forward kinematics problem is defined as the problem of finding the roll-gap and the pair-crossing angle of two work rolls for given lengths of twelve legs. On the other hand, the inverse kinematics problem is defined as the problem of finding the lengths of twelve legs when the roll-gap, the pair-crossing angle, and the position and orientation of one work roll are given. The method of manipulability analysis used in this paper follows the spirit of [1]. But, because the rolling force and moment exerted from both upper and lower rolls have been included in the manipulability analysis, more accurate results than the use of a single platform can be achieved. Two. kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• 한국태양에너지학회 논문집
• /
• 제26권3호
• /
• pp.25-32
• /
• 2006

The objective of this study is to investigate the effect of building integrated PV application method on power generation. PV modules were integrated to a hypothetical apartment building facade in Seoul, Korea. Three different design options of PV panel mounted on exterior wall were developed for the analysis of cooling effects through ventilation. Numerical simulations using TRNSYS coupled with COMIS were executed to evaluate the design options. Their facade configurations are such as vertically installed PV panels with or without air gap between PV rear surface and exterior wall surface, and the tilted PV panels attached to the exterior wall at an angle of to the horizontal. Parametric results show that there is little difference regardless of the air 9ap width between PV rear surface and exterior wall surface. Special strategies which could effectively cool a PV panel to increase the electric power are required if we prefer to a vertical facade configuration in a building integrated PV installation. Consequently, it is expected that there is no reason for architect to install vertically PV panels with air gap unless active strategies are considered.