• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.9-12
• /
• 2000

A new type electrolyzing cell with slits on parallel plate electrodes and wire-to-cylinder type electrode system has been proposed instead of the conventional parallel plate type. An investigation was carried out on the effect of the number and size of slits on ion precipitation and oxidant generation characteristics, evidenced by eliminated space charge limiting action and by elevated electric fields in active interelectrode spacing. And it is also studied on the effect of the diameter of wire electrode to ion precipitation and oxidant generation characteristics. With electrode with 48 slits, very oxidants generation water of 3.1 [ppmm] and 19.0 [ppmm] in positive electrode side were obtained with tap water and 0.1 [wt%] NaCl dissolved tap waterfed. In addition, with wire-to-cylinder type electrode system, it is found that oxidant contained water of 0.48 [ppmm] and 5.46 [ppmm] in positive electrode side were obtained with tap water and 0.1 [wt%] NaCl dissolved tap water fed for the case of discharge electrode diameter of 0.5 [$mm{\phi}$]. Consequently, very high ion precipitation and dense oxidant generation characteristics can be realized by having slits on the electrodes of conventional cell as these slits increase the electric fields and decrease the space charge limiting actions in interelectrode spacing.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권7호
• /
• pp.334-339
• /
• 2001

A silent type ozone generator using water surface has been studied and improved its ozone generation characteristics by the controlling the height of Taylor cone by installing a mesh electrode, a dielectric bed of glass beads in the just under th surface of the water. The current-voltage characteristics and characteristics of ozone generation quantity of the test system were investigated and discharge current oscillograms of the each cases of the mesh electrode and the beds were observed and compared each other to analyze the discharge conditions. The Taylor cone height could be the cause of the discharge bridge to decrease the ozone generation on the discharge spacing. In this study, the hight of Taylor cone could be reduced greatly by installing the mesh and the glass beads bed just under the water surface. Therefore a higher ozone generation also could be obtained.

• 방사선산업학회지
• /
• 제7권2_3호
• /
• pp.101-108
• /
• 2013

To develop new varieties of rapeseed (Brassica napus L.), the seeds of three varieties, 'Naehan', 'Tammi', and 'Halla' were irradiated with proton ion beams and gamma rays with 0 to 2,000 Gy. We had selected 9 lines in $M_5$ generation, and their useful characteristics were investigated by progressing from $M_6$ to $M_7$ generation for checking uniformity and stability. The 9 lines selected in $M_5$ generation were maintained their characteristics in terms of flowering date, maturing date, and plant height through $M_6$ to $M_7$ generations. Especially, 2 lines of NP600-1-1-198-2-1 and NP1000-13-2-362-4-1 selected in $M_5$ generation derived from 'Naehan' had characteristics of early maturity and shorter stem than original variety, and they also were maintained characteristic of early maturity such as 10~11 days earlier flowering date and 6~9 days earlier maturing date through $M_6$ to $M_7$ generations. For stem length, they showed characteristics of shorter stem in 2 lines of NP600-1-1-198-2-1 line and NP1000-13-2-362-4-1 line about 16%, 25% shorter stem than original variety respectively through $M_6$ to $M_7$ generations. Furthermore, some characteristics of 2 lines compared to the original variety were similar or higher in weight of 1,000 seeds, number of branches per plant, number of siliqua per panicle, number of seeds per silique, oil contents, and oleic acid contents. The line with large and plump flowers selected in $M_5$ generation also showed large and dark yellow flowers through $M_6$ to $M_7$ generations. The lines with High oleic acid and low saturated fatty acid contents selected in $M_5$ generation were maintained characteristics through $M_6$ to $M_7$ generation and these useful characteristics were expected for developing a new variety for bio diesel uses.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.5080-5097
• /
• 2017

Channel characteristics-based secret key generation is an effective physical-layer security method. The issues of how to remove the effect of random noise and to balance the key generation rate (KGR) and the bit mismatch rate (BMR) are needed to be addressed. In this paper, to reduce the effect of random noise and extract more secret bits, a new quantization scheme with high key generation rate and low bit mismatch rate is proposed. In our proposed scheme, we try to use all measurements and correct the differences caused by noise at the boundary regions instead of simply dropping them. We evaluate and discuss the improvements of our proposed scheme. The results show that our proposed scheme achieves lower bit mismatch rate as well as remaining high key generation rate.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1571-1577
• /
• 2012

This paper presents a method for assessing the voltage sag performance of power system involving wind power generation. Wind power generation is considered as one of the most desirable renewable energy sources. However, wind power generation have uncertain energy output and it is difficult to control the output. The existing methods of voltage sag assessment are not reflected the characteristics of wind power generation. Therefore, in order to more accurately assess the voltage sag performance, the probability of wind power operation is evaluated. In this paper, the probability is determined by combining the wind speed model with the output curve of wind turbine. The probability of wind power operation is reflected as a parameter in voltage sag assessment. The proposed method can provide more accurate results of voltage sag assessment for the case involving the wind power generation.

• 대한가정학회지
• /
• 제25권1호
• /
• pp.83-92
• /
• 1987

Information on the planning of the housing unit for three generation family is required for developing nuclear families and increasing elderly person. This study deal with the life style, it's characteristics and housing needs of the elderly who lived with other two generations. Specifically, this study attempted to find the basic information of the detailed planning and the establishment of criteria of the housing unit for three generation family. The results of this study were as follows. 1. Planning of the housng unit for three generation family, it had to be taken over residency areas for elderly especially for keeping privacy each other. 2. It was necessary the criteria of housing standards for eldery based on their housing characteristics. 3. Considering the psychological characterstics and life style of the elderly, it should be suggest that they could live easily with their next generation in the samecommunity. Also, the public policy should take over the housing unit for three generation family.

• 한국항공우주학회지
• /
• 제40권10호
• /
• pp.901-909
• /
• 2012

본 논문은 연료전지 UAV를 위한 고체 상태의 $NaBH_4$ 수소 발생 및 공급 시스템의 특성에 대해 기술하고 있다. 산을 이용하여 $NaBH_4$를 분해할 경우, 발생된 수소의 유량과 압력은 급격히 변화하게 된다. 공급 수소는 자체 가압식 반응기로 안정화 되었고, 수소의 안정화 방법에 대해 소개하였다. 영하조건에서 수소를 발생시키기 위해 묽은 염산을 프로필렌 글리콜 혼합 용액으로 희석하였다. 고체 상태 $NaBH_4$ 수소 발생 및 공급 시스템을 설계하였다. 수소 발생 시스템의 특성을 밝혀내기 위한 기본 구동 실험을 수행하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.81-84
• /
• 2008

This paper discussed the validity of wind force power generation in consideration of the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind velocity, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was higher at wind power plants installed in southwestern coastal areas where wind velocity was low than at those installed in mountain areas in Gangwondo where wind velocity was high. This suggests that the shape parameter of wind distribution is low due to the characteristics of mountain areas. and the standard deviation of wind velocity is large due to the effect of mountain winds, and therefore, actual generation is low in mountain areas although wind velocity is high.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권3호
• /
• pp.378-386
• /
• 2012

For reduction of the amount of CO2 emitted from ships, power generation characteristics of two power generation systems consisting of a high-efficiency permanent magnet synchronous generator and diode bridge rictifiers are discussed in this paper. One of the discussed systems has three-phase stator windings, and the other has two sets of three-phase (six-phase) stator windings to reduce pulsation in the electromagnetic torque and DC current. Experimental results reveal that the power generation efficiency of the system having six-phase stator windings is higher than that of the system having three-phase stator windings for a light load. The maximum power generation efficiency of the system having six-phase stator windings is almost the same as that of the system having three-phase stator windings. For the electromagnetic torque of the system having six-phase stator windings, the width of pulsation is about one-fifth compared to the system having three-phase stator windings.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.24-32
• /
• 2008

This paper discussed the Feasibility study of wind power generation considering the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind speed, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was almost the same at wind power plants installed in southwestern coastal areas where wind speed was low as at those installed in mountain areas in Gangwondo where wind speed was high. This demonstrates that the shape parameter of wind distribution is low due to the characteristics of mountain areas, and the standard deviation of wind speed is large due to the effect of mountain winds, therefore, actual generation compared to southwestern coastal areas is almost similar in mountain areas even though wind speed is high.