• Environmental Engineering Research
• /
• v.21 no.1
• /
• pp.69-73
• /
• 2016

Generation of food waste is a serious issue that needs to be addressed worldwide. Developing suitable treatment methods while generating energy (methane) is a common practice for sustainable treatment of waste. In this study, methane generation by food waste was investigated in mesophilic and thermophilic regimes at various hydraulic retention times (HRTs) and organic loading rates (OLR). In temperature regimes, influent concentrations and HRTs ranged from 30 to 110 g COD/L and 18 to 30 days, respectively, which corresponding to an OLR of 1.0 to $6.1kg\;COD/m^3-d$. Better methane production and organic removal was observed under thermophilic conditions because of the enhanced hydrolysis of complex polymers and microbial activity at higher temperature. The peak methane productivities attained in thermophilic and mesophilic regimes were 1.30 and $0.99m^3/m^3-d$, respectively. The maximum methane yields were achieved at 50 g COD/L and HRT of 24 d in both cases, and the values were 264 and $221m^3/ton$ COD, respectively. The results of this study will facilitate the development of sustainable methane production technologies using food waste as a feedstock.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.17-24
• /
• 2021

Recently, a lossless non-orthogonal multiple access (NOMA) implementation without successive interference cancellation (SIC) has been proposed in the literature of NOMA. This lossless non-SIC NOMA was achieved via correlated superposition coding (CSC), in contrast to conventional independent superposition coding (ISC). However, only the achievable data rates for CSC NOMA were investigated. Thus, this paper proposes a practical CSC NOMA scheme under Rayleigh fading channel environments. First, we design the practical CSC NOMA scheme, namely quadrature correlated superposition modulation (CSM) NOMA, without channel coding, i.e., uncoded systems. In addition, we calculate the symbol error rates (SERs) for this quadrature CSM NOMA scheme. Then, simulations demonstrate that for the weak channel gain's user, the SER performance of the proposed quadrature CSM NOMA is shown to be improved greatly, compared to that of the conventional quadrature amplitude modulation (QAM) NOMA, whereas for the strong channel gain's user, the SER performance of the proposed quadrature CSM NOMA degrades a little, compared to that of the conventional QAM NOMA. As a result, the proposed quadrature CSM NOMA scheme could be considered as a practical NOMA scheme for CSC NOMA schemes toward the fifth-generation (5G) and next generation communications.

• Korean journal of applied entomology
• /
• v.25 no.1 s.66
• /
• pp.1-9
• /
• 1986

Periodical samplings were made in the fields, located Hwasong-Gun, Banwal-Myon, Doondai-Ri, for two years to study the major factors responsible to the population of the overwintered pine needle gall midge, Thecodiplosis japonensis Uchida et Inouye. The population densities of the overwintered larvae reduced greatly at the time of pupation and the changing patterns seemed to be influenced by environmental conditions. The estimated 50% pupation day was about two weeks earlier for the 1980 generation compared with the 1979 generation, and much higher average and the daily maximum temperatures in 1981 affected on the development of the larvae. The relative emergence rates were 14.1% for 1979 and 14.9% for 1980 generation. The relative emergence rates(Y) were affected by the moisture contents of soil ($X_1$) and its variance $(X_2),\;Y=-68.41+4.3206X_1-0.6887X_2$. The relative emergence rates seemed to be decreased with the increased variance of the moisture contents of soil. Percents of needle gall were 49.63% for 1980 and 86.87% for 1981 generation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2503-2508
• /
• 2013

Single-person households in the Seoul Metropolitan Area have increased sharply during recent 20-30 years. Despite of decreasing in the total population, the number of single-person household is predicted to increase continuously. However, the effect of single-person household growth on the domestic transport sector has not been studied concretely. In this study, the differences on trip generation characteristics by household size and attributes were figured out by analyzing Seoul Metropolitan Area Household Travel Behavior Survey (SMA-HTBS). Firstly, trip generation rates (trips/day/person) were produced by household attribute, household member attribute and trip attribute based on SMA-HTBS. Secondly, trip generation rate of single-person household and that of multi-person (2 or more) household were compared by significance test. It was found that trips generation characteristics of single-person household is quite different from those of multi-person household by housing type, residential type, living area, and transport mode. The result of this paper is expected to contribute developing more sophisticated trip generation model and transport policy reflecting trip generation characteristics of single-person household.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.265-270
• /
• 2014

Frictional heat greatly influences the friction behaviors during clutch engagement. Therefore, the engagement of a wet or dry clutch is frequently not under control by the frictional heat. In a wet clutch, the frictional temperature also specially needs to be controlled, and in many cases, the clutch material is selected to prevent a temperature rise from the friction between friction pad and separator. However, only the selection of the clutch material cannot ensure sufficient control of the temperature rise by the friction. The groove pattern on a friction pad is designed for more flow rates of transmission fluid between the contact gap of clutch pad and separator for the cooling effect. In this work, grove patterns are designed for more flow rates out of the contact gap between friction pad and separator plate. Selected groove design shows the improvement flow rates of transmission fluid through both inner and outer radius, where most of the transmission fluid flows through the outer radius when the clutch is engaged due to the centrifugal force in conventional wet clutch groove. Several comparisons of the amounts of frictional heat generated on clutch pads are made in order to verify the decrease of the temperature rise according to the flow rates along the groove patterns.

• Journal of Ecology and Environment
• /
• v.31 no.1
• /
• pp.75-81
• /
• 2008

Rates of molecular evolution are known to vary widely among taxonomic groups. A number of studies, examining various taxonomic groups, have indicated that body size is negatively and clutch size is positively correlated with the rates of nucleotide substitutions among vertebrate species. Generally, either smaller body mass or larger clutch size is associated with shorter generation times and higher metabolic rates. However, this generality is subject to ongoing debate, and large-scale comparative studies of species below the Order level are lacking. In this study, phylogenetically independent methods were used to test for relationships between rates of the mitochondrial cytochrome b evolution and a range of life history traits, such as body mass and clutch size in the Order Galliformes. This analysis included data from 67 species of Galliformes birds and 2 outgroup species in Anseriformes. In contrast to previous studies, taxa were limited to within-Order level, not to Class or higher. I found no evidence to support an effect of life history traits on the rate of molecular evolution within the Galliformes. These results suggest that such relationship may be too weak to be observed in comparisons of closely related species or may not be a general pattern that is applicable to all nucleotide sequences or all taxonomic groups.

• KDI Journal of Economic Policy
• /
• v.40 no.3
• /
• pp.1-44
• /
• 2018

This paper studies the macroeconomic effects of an enhancement in unemployment benefits in Korea. In particular, I quantify the welfare effect of two specific policy chances which have been mainly discussed among policymakers in recent years: increasing wage replacement rates by 10%p and extending maximum benefit durations by one month. To this end, I build and calibrate an overlapping generation model which reflects the heterogeneity of the unemployed and the specificity of the unemployment insurance (UI) system in Korea. The quantitative analysis conducted here shows that extending maximum benefit durations by one month improves social welfare, whereas increasing wage replacement rates by 10%p deteriorates social welfare. Extending maximum benefit durations is applied to potentially all the UI recipients, including unemployed workers whose wage before job loss is relatively low and whose marginal utility is relatively high. However, increasing wage replacement rates is applied to only a small number of UI recipients whose wage before job loss is relatively high, while the increase in the UI premium is passed onto all of the employed. This study suggests that given the current UI system and economic environment in Korea, it is more desirable to extend maximum benefit durations rather than to increase wage replacement rates in terms of social welfare.

• YAKHAK HOEJI
• /
• v.55 no.1
• /
• pp.22-31
• /
• 2011

This systematic review was conducted to assess the clinical effect of ocular fluoroquinolones used for the treatment of bacterial conjunctivitis. A literature search for randomized controlled clinical trials registered up to January 2010 based on PubMed database, using the following search terms: conjunctivitis and fluoroquinolones (besifloxacin, moxifloxacin, gatifloxacin, levofloxacin, lomefloxacin, ciprofloxacin and ofloxacin) were performed. Pooled data on the clinical resolution and bacterial eradication rates derived from selected 16 studies were reported as the relative risk (RR) and 95% confidence interval (95% CI) compared with placebo. Early clinical resolution and microbiological eradication rates in placebo were 28% and 62% respectively. Fluoroquinolones were significantly effective comparing to placebo: early RR 1.94 (95% CI 1.60~2.34) and late RR 1.30 (1.19~1.43) in clinical resolution rates, and early RR 1.75 (1.58~1.94) and late RR 1.28 (1.18~1.39) in microbiological eradication rates. Besifloxacin, ciprofloaxain and moxifloxacin in clinical resolution, and besifloxacin and levofloxacin in microbiological eradication showed higher RRs than pooled overall fluoroquinolones' RRs. New quinolones had higher antibacterial potencies for all pathogens isolated from bacterial conjunctivitis and resistant isolates than old generation quinolones. In conclusion, ocular 7 fluoroquinolones were all effective than placebo for bacterial conjunctivitis and there were differences between quinolones in early and late clinical resolutions and microbiological eradications, and no differences in safety comparing to placebo.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.65-69
• /
• 2019

The cure properties of ethoxysilyl diglycidyl isocyanurate(Ethoxysilyl-DGIC) and ethylsilyl diglycidyl isocyanurate (Ethylsilyl-DGIC) epoxy resin systems with a phenol novolac hardener were investigated for anticipating fan out-wafer level package(FO-WLP) applications, comparing with ethoxysilyl diglycidyl ether of bisphenol-A(Ethoxysilyl-DGEBA) epoxy resin systems. The cure kinetics of these systems were analyzed by differential scanning calorimetry with an isothermal approach, and the kinetic parameters of all systems were reported in generalized kinetic equations with diffusion effects. The isocyanurate type epoxy resin systems represented the higher cure conversion rates comparing with bisphenol-A type epoxy resin systems. The Ethoxysilyl-DGIC epoxy resin system showed the highest cure conversion rates than Ethylsilyl-DGIC and Ethoxysilyl-DGEBA epoxy resin systems. It can be figured out by kinetic parameter analysis that the highest conversion rates of Ethoxysilyl-DGIC epoxy resin system are caused by higher collision frequency factor. However, the cure conversion rate increases of the Ethylsilyl-DGEBA comparing with Ethoxysilyl-DGEBA are due to the lower activation energy of Ethylsilyl-DGIC. These higher cure conversion rates in the isocyanurate type epoxy resin systems could be explained by the improvements of reaction molecule movements according to the compact structure of isocyanurate epoxy resin.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.97-104
• /
• 2001

In this paper, we present a new hierarchical model for performance analysis of channel allocation and packet service protocol in wireless n network. The proposed hierarchical model consists of two parts : upper and lower layer models. The upper layer model is the structure state model representing the state of the channel allocation and call service. The lower layer model, which captures the performance of the system within a given structure state, is the wireless packet retransmission protocol model. These models are developed using SRN which is an modeling tool. SRN, an extension of stochastic Petri net, provides compact modeling facilities for system analysis. To get the performance index, appropriate reward rates are assigned to its SRN. Fixed point iteration is used to determine the model parameters that are not available directly as input. That is, the call service time of the upper model can be obtained by packet delay in the lower model, and the packet generation rates of the lower model come from call generation rates of the upper model.