• 제목/요약/키워드: Generation Rates

검색결과 637건 처리시간 0.026초

가정용 고분자 전해질 연료전지 열병합 발전시스템의 급탕 적용을 위한 온수 저장조의 최적 설계에 관한 실험적 연구 (Experimental Investigation on the Optimal Design of Water Tank for Domestic Hot Water Supply using PEMFC Co-generation System)

  • 황유진;안영철;정성일;진근호;이재근
    • 설비공학논문집
    • /
    • 제20권6호
    • /
    • pp.394-399
    • /
    • 2008
  • There are many attempts to use a fuel cell system as a residential power generation system. The purpose of this study is to investigate the optimal design of a water tank for a hot water system when the fuel cell co-generation system is combined with a domestic hot water supply system. The demands of hot water supply per month per home are investigated in Busan for a year. It showed somewhat large differences between the actual demand and the designed demand of hot water, but the actual capacity of hourly averaged hot water demands is analyzed as $60{\ell}/h$ in this study based on the actual demand. The experiments are performed in the various inlet and outlet locations of nozzles, and the hot water consumption rates. The experimental results are showed that the optimal capacity of the water tank is $200{\ell}$ when the thermal efficiency, the storing capacity of hot water and the space for installation are considered.

The effects of cold treatment on the pupal period, emergence rate, and number of Protaetia brevitarsis larvae spawned

  • JANG, Heeseung;CHOI, Moon Bo;LEE, Hyoki;KIM, Yeongbu;KWON, Ohseok
    • Entomological Research
    • /
    • 제48권6호
    • /
    • pp.550-558
    • /
    • 2018
  • To develop a system for the mass production of Protaetia brevitarsislarvae (Pbl), this study analyzed the oviposition characteristics of third instar Pbl through successive rearing and cold treatments. In the first generation, females laid 50 eggs each on average, and spawned higher numbers of eggs for the first 5 days but then fewer after this. However, all of the $2^{nd}$-generation females that were produced through the successive rearing of eggs from the $1^{st}$ generation did not spawn. When test insects (TI) were raised at $32^{\circ}C$, their $mean{\pm}SE$ pupal period and emergence rate were $28.4{\pm}1.9$ days and 87%, respectively. However, most individuals raised in cold treatments ($5^{\circ}C$ and $-5^{\circ}C$) without a pre-cooling period did not survive. Individuals exposed to a pre-cooling period, however, had a 7-10 days longer pupal period than those raised at $32^{\circ}C$, and their emergence rate (90%) was slightly higher. Different cold treatment temperatures ($0^{\circ}C$, $3^{\circ}C$, or $5^{\circ}C$) and periods (30 or 60 days) were tested in further experiments. The experimental group kept for 30 days at $0^{\circ}C$ and $3^{\circ}C$ had the shortest pupal period of all, and emergence rates exceeded 90% in most groups. With respect to the number of eggs spawned by the second generation females after cold treatments, the experimental groups held in cold treatments at $5^{\circ}C$ for 30 and 60 days were found to spawn the most eggs. Consequently, the experimental group kept at $5^{\circ}C$ for 30 days was the most effective set of conditions tested during the entire breeding period.

내열강의 고온부식특성에 대한 크롬함량의 영향 (Hot Corrosion Properties of Heat Resistant Chrome Steels)

  • 이한상;정진성;유근봉;김의현
    • 대한금속재료학회지
    • /
    • 제48권4호
    • /
    • pp.277-288
    • /
    • 2010
  • The hot corrosion properties of heat-resistant steels were investigated in an oxidation atmosphere including artificial ash and sulfur dioxide. The heat-resistant steels of T22, T92, T122, T347HFG, Super304H and HR3C were evaluated at 620, 670 and $720^{\circ}C$ for 400 hours. The relationship between the corrosion rate and the temperature followed a bell-shaped curve with a peak rate at around $670^{\circ}C$. The corrosion rates showed a decreasing tendency as the chrome contents of these steels increased from 2.15 wt.% to 24.5 wt.%, and austenitic steels had a lower corrosion rate than ferritic steels. Sulfidation by $SO_2$ as well as molten salt corrosion also had an effect on the total corrosion rate, especially showing an increase in the corrosion rate in ferritic steels. Regardless of the chrome content in the steels and irrespective of the test temperature, the corrosion scale was composed of an outer oxide and an artificial ash mixed layer, a middle oxide layer and inner sulfide, and a mixed oxide layer. As the chrome content increased, the proportion of chrome oxide in the corrosion scale increased. Before spalling of the corrosion scale, voids and cracks were initiated in the sulfide and the mixed oxide layer or at the interface with the substrate.

형질전환 생쥐에서 제10세대까지 TPO 유전자의 안정적 전이와 지속적인 발현 (Stable Transmission and Expression of TPO Transgene up to 10 Generation in the Transgenic Mice)

  • 정진우;오건봉;한용만;이경광
    • 한국가축번식학회지
    • /
    • 제27권1호
    • /
    • pp.9-14
    • /
    • 2003
  • 형질전환 동물의 유선에서 특이적으로 인간 TPO가 발현되도록 고안된 pBT-L 외래유전자가 삽입되어 한 계통으로 확립된 형질전환 생쥐에서 이 유전자가 장기 세대까지 안정적으로 전이되고, 또한 발현 수준도 지속적으로 유지되는지를 조사 하였다 이를 위해 제 5세대의 수컷 pBT-L 형질전환 생쥐를 실험에 공시하였고, 제 10세대까지의 전이율과 인간 TPO의 발현수준을 분석하였다. 제 8세대 생쥐의 계대 번식에 의한 자손 중 51.3$\pm$18.98%가 형질전환 생쥐로 판명되었다. 또한 제9세대에서 외래 유전자의 전이율은 43.8$\pm$18.98%이었고, 제 10세대에서는 71.4$\pm$26.98%의 전이율을 나타내었다. 이러한 결과로 pBT-L 형질전환 생쥐는 그 외래유전자의 유전적 손상이 없이 장기 세대까지 안정적으로 전이되는 것으로 판단된다. 제 9세대외 10세대의 3마리의 암컷 형질전환 생쥐로 부터 유즙내 인간 TPO의 발현 수준을 분석하였을때, 그 농도는 모두 평균 1.1 mg/ml의 수준에서 측정되었다. 이러한 수준은 제 2세대의 것과 유사한 결과로 pBT-L 형질전환 생쥐에서 인간 TPO 유전자의 발현은 최소한 10세대까지 지속적으로 유지된다는 것을 알 수 있었고, 더 긴 장기 세대까지도 발현 수준이 유지될 것으로 추정된다. 이러한 연구결과는 계통으로 확립된 형질전환동물에 부여된 새로운 유전형질은 장기 세대까지 유전될 수 있음을 보여주는 것이다.

횡류식 대배기구 방식을 적용한 도로터널에서 화재시 최적배연풍량 선정에 관한 연구 (A Study of Smoke Exhaust Rate for the Transverse Ventilation with Oversized Exhaust Ports in Road Tunnel)

  • 유지오;윤성욱;이동호
    • 한국안전학회지
    • /
    • 제21권4호
    • /
    • pp.7-12
    • /
    • 2006
  • Recently, the application of transverse ventilation system with oversized exhaust ports has been increased in bidirectional road tunnel in order to improve smoke exhaust ability. Therefore, in this study, for decision of the optimal smoke exhaust rates in the transverse ventilation system, several standards of nations are compared and numerical simulations with variations of exhaust flow rates are carried out in terms of smoke spread distance by FDS ver. 3.1. As results, in the case of no internal longitudinal air velocity in tunnel, the smoke exhaust rate of $80m^{3}/s$ (the smoke generation rate at HRR of 20MW) is sufficient enough to limit the smoke spread within 250m in 6 minutes after the fire. However, in the case of the internal longitudinal air velocity at 2.5m/s, the smoke exhaust rate should be increased $130m^{3}/s$.

Improved SDR Frequency Tuning Algorithm for Frequency Hopping Systems

  • Ibrahim, Mostafa;Galal, Islam
    • ETRI Journal
    • /
    • 제38권3호
    • /
    • pp.455-462
    • /
    • 2016
  • Frequency hopping (FH) is a common characteristic of a wide variety of communication systems. On the other hand, software-defined radio (SDR) is an increasingly utilized technology for implementing modern communication systems. The main challenge when trying to realize an SDR FH system is the frequency tuning time, that is, the higher the hopping rate, the lower the required frequency tuning time. In this paper, significant universal hardware driver tuning options (within GNU Radio software) are investigated to discover the tuning option that gives the minimum frequency tuning time. This paper proposes an improved SDR frequency tuning algorithm for the generation of a target signal (with a given target frequency). The proposed algorithm aims to improve the frequency tuning time without any frequency deviation, thus allowing the realization of modern communication systems with higher FH rates. Moreover, it presents the design and implementation of an original GNU Radio Companion block that utilizes the proposed algorithm. The target SDR platform is that of the Universal Software Radio Peripheral USRP-N210 paired with the RFX2400 daughter board. Our results show that the proposed algorithm achieves higher hopping rates of up to 5,000 hops/second.

음이온 발생 공기청정기에 의한 밀폐된 실내공간에서의 ETS성분 변화 (Effect of Anion Generating Air Cleaner on the Components of ETS in a Closed Room)

  • 황건중;이문수;나도영
    • 한국연초학회지
    • /
    • 제20권1호
    • /
    • pp.124-130
    • /
    • 1998
  • This study was conducted to evaluate the ability of anion generating air cleaner to remove gases, vapor and particles from closed room contaminated with environmental tobacco smoke (ETS). The measurements covered particle sizes of 13.8-542.5nm, particle concentration, surface area, volumes UVPM, FPM, solanesol, and the following gases and vapor; carbon dioxide, carbon monoxide, nicotine, and 3-ethenylpyridine. Tobacco smoke was generated and mixed in a closed room in which the airflow rates were in the range of 0.00-0.04 m/s. The anion generating air cleaner was startedl and the decay rates for the gases, vapor and particles were measured, When the use of anion generating air cleaner, solid components of ETS, such as respirable suspended particle (RSP), utraviolet particulate matter (UVPM, fluorescent particulate matter (FPM) and solanesol was sharply decreased, and vapor phase components of ETS, such as nicotines 3-ethenylpyidine were modelately decreased by time elapse. Even the use of anion generation air cleaner, the decreasing rate of carbon dioxide concentration was similar with control, and the decreasing rate of carbon monoxide was slower than that of control. Our results indicated that the use of anion generting air cleaner had an effect on reduction of solid and vapor components from ETs, but it had no effect on gaseous components of ETS.

  • PDF

대형할인매점의 요일별 고객 방문 수 분석 및 예측 : 베이지언 포아송 모델 응용을 중심으로 (Estimating Heterogeneous Customer Arrivals to a Large Retail store : A Bayesian Poisson model perspective)

  • 김범수;이준겸
    • 경영과학
    • /
    • 제32권2호
    • /
    • pp.69-78
    • /
    • 2015
  • This paper considers a Bayesian Poisson model for multivariate count data using multiplicative rates. More specifically we compose the parameter for overall arrival rates by the product of two parameters, a common effect and an individual effect. The common effect is composed of autoregressive evolution of the parameter, which allows for analysis on seasonal effects on all multivariate time series. In addition, analysis on individual effects allows the researcher to differentiate the time series by whatevercharacterization of their choice. This type of model allows the researcher to specifically analyze two different forms of effects separately and produce a more robust result. We illustrate a simple MCMC generation combined with a Gibbs sampler step in estimating the posterior joint distribution of all parameters in the model. On the whole, the model presented in this study is an intuitive model which may handle complicated problems, and we highlight the properties and possible applications of the model with an example, analyzing real time series data involving customer arrivals to a large retail store.

탄화규소 휘스커의 합성(I) : 반응기구의 율속반응 (Synthesis of Silicon Carbide Whiskers (I) : Reaction Mechanism and Rate-Controlling Reaction)

  • 최헌진;이준근
    • 한국세라믹학회지
    • /
    • 제35권12호
    • /
    • pp.1329-1336
    • /
    • 1998
  • A twt -step carbothermal reduction scheme has been employed for the synthesis of SiC whiskers in an Ar or a H2 atmosphere via vapor-solid two-stage and vapor-liquid-solid growth mechanism respectively. It has been shown that the whisker growth proceed through the following reaction mechanism in an Ar at-mosphere : SiO2(S)+C(s)-SiO(v)+CO(v) SiO(v)3CO(v)=SiC(s)whisker+2CO2(v) 2C(s)+2CO2(v)=4CO(v) the third reaction appears to be the rate-controlling reaction since the overall reaction rates are dominated by the carbon which is participated in this reaction. The whisker growth proceeded through the following reaction mechaism in a H2 atmosphere : SiO2(s)+C(s)=SiO(v)+CO(v) 2C(s)+4H2(v)=2CH4(v) SiO(v)+2CH4(v)=SiC(s)whisker+CO(v)+4H2(v) The first reaction appears to be the rate-controlling reaction since the overall reaction rates are enhanced byincreasing the SiO vapor generation rate.

  • PDF

WCDMA Simulator Engine for 3G Wireless Network

  • Rashld Zainol Abidin Abdul;Ramaiah Karamchand Babu Atchitha
    • 정보통신설비학회논문지
    • /
    • 제2권3호
    • /
    • pp.36-47
    • /
    • 2003
  • Wideband Code Division Multiple Access (WCDMA) is one of the air interface techniques proposed for the third generation (3G) mobile communication system. WCDMA was selected because it fulfills the IMT-2000 requirements for higher data rate trans mission, support of multimedia capabilities and other flexible services due to its variable bit rates and larger bandwidth, improved capacity and coverage, efficient power control and support for advanced and improved detector structures. Performance evaluation of 3G wireless network through simulation plays an important role in the design and implementation of the actual system, aiding the wireless system designer by providing them the necessary performance conformance statistics prior to implementation. In accordance with this goal, a simulator engine was developed entirely on a MATLAB platform to emulate the behaviour of the WCDMA air interface for both the uplink and downlink in a real world fading mobile environment. This paper discuss the development of the simulator along with a brief description of its functionalities and user interface. The WCDMA air interface mode focused in this paper is in accordance to the 3GPPs frequency division duplex (FDD) mode and restricted to the physical layer description. Performance results for the selected cases for the downlink, uplink, varying mobile velocity and sampling rates are also provided.

  • PDF