• 전기의세계
• /
• 제16권4호
• /
• pp.41-49
• /
• 1967

This paper covers an estimation and analysis of generating cost of 350MWe nuclear power plant using a pressurized water reactor on the assumption that such a nuclear power plant would be constructed in Korea in or around 1970. For the evaluation of this generating cost, an extensive study has been conducted based on the current information on operating and costing parameters of light water reactors, particularly those of pressurized water reactors. Based on this study, a total generating cost of 7.29 Mills/Kwh was evaluated by operating the plant at 80% plant factor. For this calculation, a steady state method was introduced. It is considered, therefore, that a total generating cost in the beginning of plant operation would be a little higher than 7.29 Mills/Kwh, which has been calculated in the state of equilibrium.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.102-106
• /
• 1988

Generally, average invest cost is widely used for expansion planning of generation in power system. But, other cost which is followed by adding generating capacity in electric system is increased in accordance with increasing plant reasons. In this study, we represent the invest cost with quadratic function and analyze its effect on the expansion planning. It is hoped that this method is used in expansion planning of generating system.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.253-260
• /
• 2022

Existing web-based cost databases have proved invaluable for construction cost estimating. These databases have been utilized to compute approximate cost estimates using assembly rates, unit rates, and etc. These web-based databases can be used independently with traditional cost estimation methods (manual methods) or used to support BIM-based cost estimating platforms. However, these databases are rigid, costly, and require a lot of manual inputs to reflect recent trends in prices or prices relative to a construction project's location. To address this gap, this study integrated deep learning techniques with web-based price analysis to develop a database that incorporates a project's location cost estimating standards and current cost trends in generating a cost estimate. The proposed method was tested in a case study project in Lagos, Nigeria. A cost estimate was successfully generated. Comparison of the experimental results with results using current industry standards showed that the proposed method achieved a 98.16% accuracy. The results showed that the proposed method was successful in generating approximate cost estimates irrespective of project's location.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.191-198
• /
• 2014

본 논문은 복잡한 비평활 발전비용함수를 가진 경제급전의 최적화 문제를 풀기 위해 단순히 선형 근사함수를 이용하는 방법을 제안하였다. 제안된 알고리즘은 비평활 발전비용 함수를 선형으로 근사시키고, 요구량이 현재의 발전량을 초과하는 경우 발전단가가 비싼 발전기의 가동을 중지시키고, 발전단가가 보다 큰 발전기의 발전량을 감소시켜 요구량과 발전량의 균형을 맞추는 개념을 도입하였다. 경제급전 문제의 시험사례로 빈번히 활용되고 있는 데이터에 대해 제안된 알고리즘을 적용한 결과 기존의 휴리스틱 알고리즘의 최적화 해를 획기적으로 감소시킬 수 있었으며, 현재 실무적으로 적용되고 있는 2차 평활함수 근사법과 유사한 결과를 얻었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권1호
• /
• pp.67-72
• /
• 2004

This paper addresses the bidding strategies of generating firms in a competitive market where the firms are provided with payment for generating reactive power. Reactive support for voltage control is an integral and critical part of power system operations. Since reactive support is unbundled in a competitive market under open access transmission, it is treated as one of ancillary services. The operation costs and opportunity costs for reactive support are compensated by payment to the firms, hence their bidding strategies will be affected. The opportunity costs are evaluated from the foregone profits of a generator in making sales in real power market by providing reactive support instead of real power. Game theory approach is used to analysis the transaction strategies of real power by the bimatrix method in this paper. Through computing the Nash equilibrium in a sample system, an incentive of a generator for improving the reactive generating capacity is found to be effective and the variations of the profits are analyzed as the demand power factor changes.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1199-1205
• /
• 2014

A power system configuration has been increasingly advanced with a number of generating units. In particular, renewable energy resources are widely introduced due to the environmental issues. When applying the renewable energy sources with the ESS (Energy Storage System), the ESS is the role of a potential generating resource in the power system while mitigating the output volatility of renewable energy resources. Thus, for applications of the ESS, the surrounding environment of it should be considered, which means that capacity and energy of the ESS can be affected. Moreover, operation strategy of the ESS should be proposed according to the installation purpose as well as the surrounding environment. In the paper, operation strategy of the ESS is proposed considering load demand and the output of renewable energy resources on a hourly basis. Then, the cost of electrical energy is minimized based on the economic model that consists of capital cost, operation cost, fuel cost, and grid cost for a year. It is sure that peak-shaving effects can be achieved while satisfying the minimum cost of electrical energy.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2020년도 제62차 하계학술대회논문집 28권2호
• /
• pp.387-388
• /
• 2020

As the utilization of microservice architectural style in diverse applications are increasing, the microservice deployment cost became a concern for many companies. We propose an approach to reduce the deployment cost by generating an algorithm which minimizes the cost of basic operation of a physical machine and the cost of resources assigned to a physical machine. This algorithm will produce optimal resource allocation and deployment location based on genetic algorithm process.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.687-691
• /
• 2003

In photovoltaic generation, PV module is used to generate the electricity, and this system has been in limelight as nonpolluting alternative energy source. But, as energy density is low and PV module cost is high, there is a disadvantage that initial investment cost go up. In this study, we studied the method of allowing a tracker, adequate to photovoltaic generation, for Increasing the generating. We determined the proper error angle in order to decrease the repeating number of tracking without a reduction of the generating by using our developed simulator. And, we presented the photovoltaic approach tracking control and achieved its experiment. Through the result of experiment, it is expected that the fault rate and the consumption of electric power in a tracker get reduced and its cost become cut down.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권12호
• /
• pp.570-575
• /
• 2006

This paper develops methodology in order to consider CHP(Combined Heat and Power) capacity in the Basic Plan of Long Term Electricity Supply & Demand. We develop generating cost of CHP considering electric and heat. Also we develop mixed load duration curve which includes the electric load and heat load and then apply CHP capacity to SCM(Screening Curve Method) considering CHP feature. Accordingly, it decide the optimal CHP capacity in the Basic Plan of Long Term Electricity Supply & Demand. Also, We perform the sensitivity analysis according to cost variation.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.45-53
• /
• 2010

This paper presents an improved parallel particle swarm optimization approach (IPPSO) based decomposed network for economic power dispatch with discontinuous fuel cost functions. The range of partial power demand corresponding to the partial output powers near the global optimal solution is determined by a flexible decomposed network strategy and then the final optimal solution is obtained by parallel Particle Swarm Optimization. The proposed approach tested on 6 generating units with smooth cost function, and to 26-bus (6 generating units) with consideration of prohibited zone effect, the simulation results compared with recent global optimization methods (Bee-OPF, GA, MTS, SA, PSO). From the different case studies, it is observed that the proposed approach provides qualitative solution with less computational time compared to various methods available in the literature survey.