• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.152-157
• /
• 2009

In designing and manufacturing a submarine, an expensive real mock up is usually built as a reference because of the spatial constraints of a submarine. This paper presents an integrated and automated design process for a submarine that uses a digital mock up. Various equipment libraries are built for feature based design. Using the developed digital mock up, this paper shows various ways to verify the design, including a space analysis to check for any interference between pieces of equipment and the hull and an ergonomic analysis using lifelike dummies to examine the work space and operability. As a part of the integrated design system, a design automation system was also developed to generate surface point data for the outer hull, pressure hull, casing, and sail. The whole process was applied to the design of a submarine for verification.

• 한국데이터정보과학회:학술대회논문집
• /
• 2006.04a
• /
• pp.279-293
• /
• 2006

In this paper, we derive the approximate maximum likelihood estimators of the scale parameter and location parameter of the exponential distribution based on multiply Type-II censored samples. Then three type tests, including the modified Clamor-von Mises test, the modified Watson test and the modified Kolmogorov-Smirnov test are developed for the exponential distribution based on multiply Type-II censored samples by using the proposed estimators. For each test, Monte Carlo techniques are used to generate critical values. The powers of these tests are investigated under several alternative distributions.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.544-549
• /
• 1997

Injector of high voltage or linear ion accelerator is intended to generate, extract and form beam of certain species with required parameters at the entrance of accelerating structure or, for low energy case, directly in the processing chamber (end station). Injector is the main part defining the ion accelerator performance and reliability. Its power supply and control system (PSCS) features are conditioned by placing the injector equipment at high voltage potential and by complexity of the plasma-beam load. The injector's PSCS should provide: - Transmission of electric power onto high voltage (h/v) terminal; - Obtaining of required output characteristics for injector equipment operation; - Transmission of the operational data and start/stop signals from h/v terminal to control cabinet; - Rremote control of injector; - Withstanding the high voltage breakdowns and X-ray radiation; - Compatibility with other equipment. The paper is concerned with analysis of injectors' PSCS structure and description of the system developed for 50 keV, 20 mA heavy ion injector.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1068-1069
• /
• 2015

Wind turbines have an enormous potential for decentralized electricity generation. In recent years, there has been an increasing worldwide interest in small/medium wind systems. This paper presents the results of power performance testing conducted on a 50 kW turbine located in Yeonggwang test-bed. The turbine system is a pitch, active yaw, variable speed, upwind, three blade with a direct drive PMSG. This thesis covers the operation of variable speed wind turbines with pitch-yaw control. The system considered is controlled to generate maximum energy while minimizing loads. The data include power, wind speed, and direction from meteorological towers, and nacelle anemometer readings and output from turbine. The analysis concentrates on the effect of the load on the power-wind speed curve of the turbine.

• Advances in Computational Design
• /
• v.2 no.3
• /
• pp.241-256
• /
• 2017

This paper introduces the process for Multi-objective Optimization Framework (MOF) which mediates multiple conflicting design targets. Even though the extensive researches have shown the benefits of optimization in engineering and design disciplines, most optimizations have been limited to the performance-related targets or the single-objective optimization which seek optimum solution within one design parameter. In design practice, however, designers should consider the multiple parameters whose resultant purposes are conflicting. The MOF is a BIM-integrated and simulation-based parametric workflow capable of optimizing the configuration of building components by using performance and non-performance driven measure to satisfy requirements including build programs, climate-based daylighting, occupant's experience, construction cost and etc. The MOF will generate, evaluate all different possible configurations within the predefined each parameter, present the most optimized set of solution, and then feed BIM environment to minimize data loss across software platform. This paper illustrates how Multi-objective optimization methodology can be utilized in design practice by integrating advanced simulation, optimization algorithm and BIM.

• Wind and Structures
• /
• v.31 no.4
• /
• pp.311-319
• /
• 2020

India is a developing nation and heavily spends on the development of wind power plants to meet the national energy demand. The objective of this paper is to investigate wind power potential of Ennore site using wind data collected over a period of two years by three parameter Weibull distribution. The Weibull parameters are estimated using maximum likelihood, least square method and moment method and the accuracy is determined using R² and root mean square error values. The site specific capacity factor is calculated by the mathematical model developed by three parameter Weibull distribution at different hub heights above the ground level. At last, the wind energy economic analysis is carried out using capacity factor at 30 m, 40 m and 50 m height for different wind turbine models. The analysis showed that the site has potential to install utility wind turbines to generate energy at the lowest cost per kilowatt-hour at height of 50 m. This research provides information of wind characteristics of potential sites and helps in selecting suitable wind turbine.

• Journal of Distribution Science
• /
• v.16 no.2
• /
• pp.19-24
• /
• 2018

Purpose - Drone delivery is expected to revolutionize the supply chain industry. This paper aims to introduce a collaborative parcel delivery problem by truck and drone (hereinafter called "TDRP") and propose a novel heuristic method to solve the problem. Research design, data, and methodology - To show the effectiveness of collaborative delivery by truck and drone, we generate a toy problem composed of 9 customers and the speed of drone is assumed to be two times faster than truck. We compared the delivery completion times by 'truck only' case and 'truck and drone' case by solving the optimization problem respectively. Results - We provide literature reviews for truck and drone routing problem for collaborative delivery and propose a novel and original heuristic method to solve the problem with numerical example. By numerical example, collaborative delivery is expected to reduce delivery completion time by 12~33% than 'truck only' case. Conclusions - In this paper, we introduce the TDRP in order for collaborative delivery to be effective and propose a novel and original heuristic method to solve the problem. The results of research will be help to develop effective heuristic solution and optimize the parcel delivery by using drone.

• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.13-19
• /
• 1999

Using GPS carrier phase whose cycle ambiguities are resolved, it is possible to perform precise survey requiring centimeter-level positioning accuracy. Because of an optical illusion, we cannot recognize the exact slope of Dokaebi Road. In this paper, we performed kinematic survey experiments in order to calculate the exact slope of Dokaebi Road with high positioning accuracy of CDGPS. By post-processing experimental data using CDGPS, it was possible to generate the exact vertical trajectory of Dokaebi Road with centimeter-level accuracy.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2004

In the process of finite element analysis, mesh generation is tedious job which consumes tremendous time. Therefore, the automation of well shaped mesh generation from the minimal boundary input data is desirable to improve reliability and accuracy of the analysis and also to reduce the process time of the entire design process. The automation of triangular mesh generation has been relatively well treated due to its robustness and ease of handling when compared to rectangular element mesh generation. In this study, the offset method developed previously for generating plane rectangular element mesh has been corrected and modified to generate triangular element mesh on the B-spline surface having arbitrary holes. The result shows that the generated triangular mesh has the average aspect ratio over 0.9. The designed arbitrary surface shape has been interactively constructed by non-uniform B-spline theory for triangular mesh generation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.465-468
• /
• 2001

An objection of this study is to develop a high stable analytic system of radioactive pulses. The proposed system consists of an amplifying circuit with 60dB gain, a programmable power supply unit which can generate DC voltage up to 1, 500V, and a digital signal processor. Pulse height distribution in accordance with pulse counts is important data in analyzing radioactive pulses. In this study, AD convertor (12bit, l00ns) and DSP (TMS 320C31-60) are used to analyze the pulse height, and the analytic system is designed to be operated in PC-networking.