• Nuclear Engineering and Technology
• /
• 제22권4호
• /
• pp.371-379
• /
• 1990

제논의 공간적인 진동은 원자로의 운전에 지장을 초래할 수 있다. 본 연구에서는 가압경수로에서의 제논에 의한 불안정성을 분석하기 위하여, 보다 일반적이고 다중입력/다중출력 계통에 적합한 일반화된 Nyquist조건을 사용하는 진동수위주의 기술을 적용하였다. 또한 모드전개 방법에 의하여 선형화된 중성자속을 구했다. 이 모형으로 출력 준위, 제어봉 위치, 그리고 평균 노심 연소도둥의 노물리 변수의 변화에 따른 영광 1호기의 제논에 대한 축방향 안정성을 조사하였다. 결과로는, 출력 준위의 증가나 제어봉 삽입의 증가는 안정성을 저해하는 효과를 가져오고, 연소도가 증가할 수록 불안정한 것으로 나타났다.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.896-908
• /
• 2013

Under high grid impedance conditions, it is difficult to guarantee the stability of grid-connected inverters with an LCL filter designed based on ideal grid conditions. In this paper, the theoretical basis for output impedance calculation is introduced. Based on the small-signal model, the d-d channel closed-loop output impedance models adopting the converter-side current control method and the grid-side current control method are derived, respectively. Specifically, this paper shows how to simplify the stability analysis which is usually complemented based on the generalized Nyquist stability criterion (GNC). The stability of each current-controlled grid-connected system is analyzed via the proposed simplified method. Moreover, the influence of the LCL parameters on the stability margin of grid-connected inverter controlled with converter-side current is studied. It is shown that the stability of grid-connected systems is fully determined by the d-d channel output admittance of the grid-connected inverter and the inductive component of the grid impedance. Experimental results validate the proposed theoretical stability analysis.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.756-765
• /
• 2017

The control of the power conversion system (PCS) in a battery energy storage system has a challenge due to the existence of grid impedance. This paper studies an impedance model of an LCL-based PCS in the d-q domain. The feature of a PCS connected to a weak grid is unveiled by use of an impedance model and a generalized Nyquist criterion. It is shown that the interaction between grid impedance and the PCS destabilizes the cascaded system in certain cases. Therefore, this paper proposes a novel control method that adopts virtual resistors to overcome this issue. The improvement in the control loop leads the PCS to a more stable condition than the conventional method. Impedance measurement is implemented to verify the correctness of the theoretical analysis. Experimental results obtained from a down-scaled prototype indicate that the proposed control method can improve the performance of the PCS under a weak grid.