• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.67-81
• /
• 2021

Grouting is used for reinforcement and waterproofing of soft ground to increase its bearing capacity, reduce the impacts of rising or lowering groundwater levels, and reduce subsidence due to vibration and general causes. This study investigated the enhancement of grout strength and hardening time by the addition of reinforcing fibers, and the development of non-cement grouting materials from blast furnace slag. An experiment was performed to measure the increase in grout strength resulting from the addition of 0.5% increments of aramid and carbon reinforcing fibers. The results show that the uniaxial compressive strength of grout increases with increasing content of reinforcing fiber. Comparison of three admixtures of finely powdered blast furnace slag and 10%, 20%, and 30% calcium hydroxide stimulating agent showed that the uniaxial compressive strength of the mixture increases with increasing content of alkaline stimulant; however, the strength was lower than for 100% pure cement. The reaction of calcium hydroxide with blast furnace slag powder, which increases the strength of the grout, is more effective if injected as a solution rather than a powder.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.535-547
• /
• 2021

A policy to expand the hydrogen economy has been established in Korea and the supply of FCEV is being expanded to realize a hydrogen society. Therefore, the supply of FCEV is expected to increase rapidly, and a solution to respond to accidents of FCEV is required. In this study, an experimental study was conducted to analyze the effect of the hydrogen jet flame generated by a FCEV on the inner wall of the tunnel and the characteristics of the internal radiant heat. For the experiment, the initial pressure of hydrogen tank was set to 700 bar, and the injection nozzle diameter was set to 1.8 mm in order to make the same as the conditions generated in the FCEV. In addition, a tunnel fire resistance test specimen having the same strength as the compressive strength of concrete applied to general tunnels of 40 MPa was manufactured and used in the experiment. The results were analyzed for the separation distance (2 m and 4 m) between the hydrogen release nozzle and the tunnel fire resistance test concrete. As the result, the maximum internal temperature of the test concrete was measured to 1,349.9℃ (2 m separation distance), and the radiant heat around the jet flame was up to 39.16 kW/m².

• The Journal of Korean Society for School & Community Health Education
• /
• v.23 no.4
• /
• pp.17-28
• /
• 2022

Objectives: This study aimed to provide the measures for improving the self-directed learning ability and the reference data for substantializing the educational programs by verifying the main factors affecting the self-directed learning ability of dental hygiene students in reality when the learners' autonomy is emphasized than ever. Methods: From June 20 to July 4, 2022, an online survey was conducted targeting total 218 dental hygiene students. The collected data was analyzed by using the SPSS Program Version 22.0. Results: First, in the results of analyzing differences in detailed items of self-directed learning ability according to the general characteristics, the 'students who entered the department of dental hygiene by considering their aptitude and interest' showed higher results than the 'students who entered the department by considering their high school record'. Second, when the academic efficacy, study immersion, and problem-solving ability of dental hygiene students were higher, their self-directed learning ability was also high. Third, the factor that had the greatest effect on self-directed learning ability of dental hygiene students was problem-solving ability, which was followed by academic efficacy and study immersion. Conclusion: Putting together the results above, in order to cultivate the problem-solving ability of dental hygiene students, it would be necessary to operate the problem-solving-centered simulation course that could foster critical thinking, interactions with others, and creative approach and solution to problems in dental medical site. It would be also possible to improve their academic efficacy by applying the learning mentoring & one-to-one learning counseling program, and also strengthening proper feedbacks for learners. Moreover, the study immersion could be strengthened by developing and operating the emotion-based learning motivation program & learning coaching program through the process of verifying the potential and growth needs of learners, exploring one's own resources through learning diagnosis/introspection, and exploring the career-related vision for strengthening the learning motivation, which could have positive effects on the improvement of self-directed learning ability.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.359-366
• /
• 2022

In this paper, we present the Korean menu-ordering Sentence Text-to-Speech (TTS) system using conformer-based FastSpeech2. Conformer is the convolution-augmented transformer, which was originally proposed in Speech Recognition. Combining two different structures, the Conformer extracts better local and global features. It comprises two half Feed Forward module at the front and the end, sandwiching the Multi-Head Self-Attention module and Convolution module. We introduce the Conformer in Korean TTS, as we know it works well in Korean Speech Recognition. For comparison between transformer-based TTS model and Conformer-based one, we train FastSpeech2 and Conformer-based FastSpeech2. We collected a phoneme-balanced data set and used this for training our models. This corpus comprises not only general conversation, but also menu-ordering conversation consisting mainly of loanwords. This data set is the solution to the current Korean TTS model's degradation in loanwords. As a result of generating a synthesized sound using ParallelWave Gan, the Conformer-based FastSpeech2 achieved superior performance of MOS 4.04. We confirm that the model performance improved when the same structure was changed from transformer to Conformer in the Korean TTS.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.105-111
• /
• 2021

⁸⁹Zr is a positron-emitting radioisotope, which has known as well-suited radioisotope for use in a monoclonal antibody-based imaging agent for immuno-PET. The purpose of this study was to quantitatively evaluate the diagnostic ability of general trastuzumab and thio-trastuzumab as HER2 positive receptors based on Df hexadentate iron chelator. Desferrioxamine-p-SCN (Df-Bz-NCS) and desferroixamine-maleimide (Df-Mal) were purchased from Macrocyclics (Dallas, TX, USA). The trastuzumab was purchased from Roche (Schweiz), and thio-trastuzumab was obtained from professor Hyo-Jeong Hong group (Kangwon National University). The radioisotope ⁸⁹Zr was produced by domestic purification system and KIRAMS using medical cyclotron (50 MeV, Scantronix). The conjugates of Df-trastuzumab and Df-thio-trastuzumab were prepared with Df-Bz-NCS and Df-Mal under basic aqueous solution (pH 8-9) at room temperature, respectively. The conjugates purified by PD-10 column were mixed with dried ⁸⁹Zr chloride. ⁸⁹Zr-labeled conjugates were purified and concentrated by Amicon ultra centrifugal filter. The preparation step and time of ⁸⁹Zr-labeled conjugates was shorted as 4 steps within 2 hours. ⁸⁹Zr-labeled conjugates showed the highly radiochemical purity of over 98%, and were very stable until 7 days by the analysis of radio-ITLC method. Each radio-labeled conjugates were also exhibited the highly stability in both PBS buffer and mouse serum. Immuno-PET imaging of ⁸⁹Zr-labeled conjugates in mice bearing gastric cancer xenograft tumors with HER2 expression showed high tumor uptake in the NCI-N87 HER2-expressing. However, ⁸⁹Zr-Df-Mal-thio-trastuzumab showed a relatively lower tumor-to-background ratio than ⁸⁹Zr-Df-Bz-trastuzumab, as well as whole-body distribution. In the results, ⁸⁹Zr-Df-Bz-trastuzumab was evaluated to have a relatively higher HER2 diagnostic ability than ⁸⁹Zr-Df-Mal-thio-trastuzumab.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• The Mathematical Education
• /
• v.61 no.1
• /
• pp.47-62
• /
• 2022

This study investigated the contents related to the plane figures in the geometry domains of Joseon-Sanhak in the late 18th century and focused on changes in explanations and calculation methods related to plane figures, the rigor of mathematical logic in the problem-solving process, and the newly emerged mathematical topics. For this purpose, We analyzed , and written in the late 18th century and and written in the previous period. The results of this study are as follows. First, an explanation that pays attention to the figures as an object of inquiry, not as a measurement object, and a case of additional presentation or replacing the existing solution method was found. Second, descriptions of the validity of calculations in some problems, explanations through diagrams with figure diagrams, clear perceptions of approximations and explanations of more precise approximation were representative examples of pursuing the rigor of mathematical logic. Lastly, the new geometric domain theme in the late 18th century was Palsun corresponding to today's trigonometric functions and example of extending the relationship between the components of the triangle to a general triangle. Joseon-Sanhak cases in the late 18th century are the meaningful materials which explain the gradual acceptance of the theoretical and argumentative style of Western mathematics

• Journal of Space Technology and Applications
• /
• v.3 no.2
• /
• pp.165-198
• /
• 2023

According to the studies recently published through advanced maui optical and space surveillance technologies (AMOS) Conference 2021, LEO conjunction assessment revolves around not on operating satellites but space debris such as rocket bodies and non-operational satellites, hence suggesting a solution through space traffic management. Against this backdrop, the issue of active debris removal (ADR) has emerged to the surface as an international challenge throughout the globe. In step with this, the United Nations General Assembly approved a resolution calling on nations to halt tests of direct-ascent anti-satellites, to which U.S. and twelve other nations included Republic of Korea were original signatories. ADR techniques are also actively being researched in the civil sector, and these commercial services, if successfully developed, could possibly be utilized for military use as well. As such, this paper will help readers' understanding for the current status of ADR techniques, space threat assessments, on-orbit rendezvous and proximity operations by looking at previous cases, reflecting on space-faring nations' ADR techniques and its development probability in relation to space weapons. As a conclusion, this study will propose the needs of developing space propulsion system by understanding Space Maneuver Warfare in preparation for the future space battlefield.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.3
• /
• pp.19-28
• /
• 2023

The purpose of this study is to estimate carbon dioxide emissions from soil microbial respiration by forest type of Sobaeksan National Park. As a result of estimating the annual soil microbiological respiration volume by forest type in Sobaeksan National Park, broad-leaved forests, coniferous forest, artificial forests were similar to around 19.5 CO₂-ton/ha/yr. In the case of coniferous forests in sub-alpine and grassland near Birobong Peak, 12.2 CO₂-ton/ha/yr and 8.1 CO₂-ton/ha/yr, respectively, were lower than general forest areas. And as a result of analyzing the changes in soil microbiological respiration rate according to forest type in Sobaeksan National Park, the soil microbiological respiration rate in coniferous forests, broad-leaved forests, artificial forests, and sub-alpine areas was the highest in the July survey in summer and the lowest in November in late autumn. The change in soil microbial respiratory volume according to the measurement time in Sobaeksan National Park was the highest between 12:00 and 16:00, when the soil temperature was generally the highest among the days. It is known that the soil temperature is relatively low and the amount of soil microbial respiration decreases during winter, and the change in respiratory volume over the measurement time during the day was the smallest in November, when the amount of soil microbial respiration was relatively smaller than the May-September survey. However, this study has limitations in revealing the causal relationship of various environmental factors that affect the soil microbial respiration. Therefore, it is suggested that long-term research and investigation of various factors affecting soil respiration are needed to understand the carbon cycle of forest ecosystems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.765-778
• /
• 2008

Performance Profiles are essential to predict the performance variation over time for the bridge management system (BMS) based on risk management. In general, condition profiles based on experts opinion and/or visual inspection records have been used widely because obtaining profiles based on real performance is not easy. However, those condition profiles usually don't give a good consistency to the safety of bridges, causing practical problems for the effective bridge management. The accuracy of performance evaluation is directly related to the accuracy of BMS. The reliability of the evaluation is important to produce the optimal solution for distributing maintenance budget reasonably. However, conventional methods of bridge assessment are not suitable for a more sophisticated decision making procedure. In this study, a method to compute quantitative performance profiles has been proposed to overcome the limitations of those conventional models. In Bridge Management Systems, the main role of performance profiles is to compute and predict the performance of bridges subject to lifetime activities with uncertainty. Therefore, the computation time for obtaining an optimal maintenance scenario is closely related to the efficiency of the performance profile. In this study, the Response Surface Method (RSM) based on independent and important design variables is developed for the rapid computation. Steel box bridges have been investigated because the number of independent design variables can be reduced significantly due to the high dependency between design variables.