• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.379-385
• /
• 2005

This study was conducted to find out a useful bioremediation technology for heavy metal contaminated soil and water. We isolated strain CPB from heavy metal contaminated soil and evaluated the tolerance level and adsorption capacity of strain CPB to heavy metals (Strain is not determined yet). Strain CPB showed variable tolerance limit to different kinds heavy metal or concentrations of heavy metals. The growth of strain CPB was significantly inhibited by mixed heavy metals (Cd+Cu+Pb+Zn) than that of by single heavy metal. Strain CPB showed high binding capacity with Pb (Pb>Cd>Cu>Zn). In general, strain CPB showed high uptake of heavy metals such as Pb, Cd and Cu. It was observed that the capacity of heavy metal uptake from mixture of heavy metals was reduced in comparison with single heavy metal treatment. But total contents of heavy metal bound with cell in mixed heavy metal showed higher than in single heavy metal treatment. Heavy metal adsorption in cells was affected by several external factors, such as temperature and pH etc.. The optimum temperature and pH of the adsorption of heavy metal into cells were ca. $25{\sim}35^{\circ}C$ and pH ca. $5{\sim}7$, respectively. A large number of the electron dense particles were found mainly on the cell wall and cell membrane fractions, which was determined by transmission electron microscope. Energy dispersive X-ray spectroscopy revealed that the electron dense particles were the heavy metal complexes the substances binding with heavy metals.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.54-61
• /
• 2012

In this study, the adsorption of $Cu^{2+}$ from aqueous solution by the biochar derived from woody biomass at different pyrolysis temperatures has been investigated. The woody biomass wastes used in this study were branch of willow ($Salix$ $koreensis$ $Andersson$) and bark of chestnut ($Castanea$ $crenata$ $var.$ $dulcis$). Three biochar samples prepared by heating each biomass at temperature of $300^{\circ}C$, $500^{\circ}C$, and $700^{\circ}C$were tested for the adsorption capacity of Cu. Also the physicochemical properties of the developed biochars were studied using different characterization techniques such as FT-IR, SEM, BET surface area, and cation exchange capacity (CEC). The adsorption of Cu could be well described by Langmuir model for both willow and chestnut biochars with $R^2{\geq}0.98$. The maximum adsorption capacities of the biochar produced at $700^{\circ}C$ from the Langmuir equation were found to be 12.5 mg $g^{-1}$ and 16.9 mg $g^{-1}$ for willow and chestnut, respectively. Chestnut biochar was found to interact more effectively with the active sites available for Cu, resulting higher removal of Cu(II) than wiloow biochar. Ion exchange and surface complexation found to be the main mechanisms involved in the adsorption process. This study demonstrated the feasibility of the biochars derived from woody biomass to be as a low-cost potential adsorbent for heavy metals as Cu(II) removal in aquatic system.

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.411-424
• /
• 2011

The studies of congruence in organizational research have explored the concepts such as person-job fit person-organization fit, or person-environment fit. The relevant studies dealt with the fit level as an important influencing factor on the performance. In particular, researchers have agreed that employees can be motivated by the high level fit of person-organization. However, few research developing an alternative methodological approach has been done. For the purpose mentioned above the statistics like D, |D| or $D^2$ and the Q values such as Q(the correlation between two sets of interval measures) or $Q_r$(the correlation between two rankings) have been conventionally adopted in spite of numerous methodological problems. In general, these traditional indices such as difference scores, or Q values, are nondirectional and add an extra weight to differences of lager magnitude. Therefore, Edwards (1993) introduced the polynomial regression and the response surface analysis to overcome flaws with conventional approaches. However, the method-ological approaches did not reflect the profile characteristics of person-organizational value fit and wouldn't be a proper solution for the fit level of person-organization value maximizing performance. Hence, this paper investigates alternative methodological approaches, the multivariate polynomial regression and the multiple response surface analysis, to avoid the problems issued from conventional ways.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.439-448
• /
• 2010

Furniture world which is closely associated with human life had been constantly developed, but traditional furniture disappeared after modernization almost. The reason lies rather in the importance of the diversity of Western-style furniture pursuing convenience and shapes, than in change of life style meanwhile. The diversity however reached the limit and it made a new advanced role of not only furniture, also design sector in general necessary, and as solution to solve this problem the immaterial value based on Eastern philosophy/mental was suggested in architecture and all around design sector overall as well. It means that the immaterial point which traditional furniture involved should be focused now and furthermore it's emotional and mental value which is more natural and has close relation with human being accordingly could be judged rightly. The reason why traditional furniture had been used since long time is the immaterial tendency which is well harmonized with the surrounding environment rather than the function. To verify this, the present study aimed to analyze not only the basic, also additional function of traditional furniture used in Hanok (traditional Koran-style house) by the inductive method for investigating the additional effects which users felt. Such immaterial role offers the user more convenience besides the original function of furniture and this made it available that furniture dominates the space. As good examples of such roles it was investigated that traditional furniture played meaningful roles like extensional serviceability, variable space, formation & movement of space, expression of grade of rank. That allowed that this study suggested the sustainable design and also the direction of development of interactive function of furniture through the expected effect having been showed in the modern space where the immaterial role of traditional furniture was applied to and the related cases.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.32-40
• /
• 1992

Many studies have been carried out on the graft finishing in order to improve the quality of silk fiber. Various vinyl monomers, for instance, styrene, methylmethacrylate, 2-hydroxyeth-ylmethacrylate and methacrylamide, have been used practically up to date. Among these monomers, methacrylamide has been applied as the most favourable monomer onto silk fibers in recent years. The polymerization mechanism about styrene- and methylmethacrylate-grafted silk fiber has been studied by many researchers. They proposed that free radicals were formed and vinyl monomers were polymerized in silk fibroin by graft polymerization mechanism, while active sites were varied by the types of monomer and initiator as well as by the reaction condition. In general. there is another Opinion that monomers are polymerized and impregnated in the internal side of the fiber by homopolymerization, which has not been proved experimentally yet More than 10 years have been passed since methacrylamide was applied on the silk fiber, and at the present time most finishings are being achieved by methacrylamide. However, no attention has been paid to the polymerization mechanism of the methacrylamide-treated silk fiber yeL In this paper, the treatments of methacrylamide on silk fibers were studied in aqueous solution using potassium persulfate as an initiator. The polymerization mechanism of the methacrylamide-treated silk fibers was investigated and analyzed on the basis of the results of infrared spectroscopy, amino acid analysis and scanning electron microscopy. From the results of these instrumental analyses, it can be suggested that polymerization mechanism about the methacrylamide-treated silk fibers is not performed by graft polymerization which has been accepted generally in styrene and methylmethacrylate-grafted silk fibers. The different mechanism is supposed to be due to the difference in monomer types, initiator types and treatment conditions.

• Journal of Korean Biological Nursing Science
• /
• v.6 no.2
• /
• pp.43-55
• /
• 2004

Purpose : This study was conducted to identify the peritonitis occurence of CAPD, by which a basis for efficient patient management could be provided. Method: Data were collected by questionnaires and hospital record from 55 people who underwent or were going through CAPD from January 1998 to April 2004 in a university subsidiary hospital kidney department. Result: 1) There were many elderly people of 61 years or above taking up 50.9%, 75% had low levels of education with middle school graduation or less, and the cases where separate individual rooms enabling the exchange of CAPD were not possessed was shown to be 61.8%. 2) With the management feature of CAPD, those who bathed once or less per 7 days made up 60.0%, and 60% washed their hands well before exchanging solutions which meant that 40% did not wash well or just washed moderately, and in terms of CAPD education, the proportion of those receiving education both before and after dialysis was 29.1%. also, with nutrition conditions, cases where the level of serum albumin was lower than 3.0 made up 38.2%, and those who were conducting self CAPD management was 65.5%, and cases where the management was done by the spouse or family members was revealed to be 34.5%. 3) There were Peritonitis occurrences in 40% of cases, and the number of Peritonitis occurrences within the period was 36, with an occurrence rate of $0.65{\pm}0.99$. Also, 66.7% of the causing bacteria were no growth, Gram positive bacteria made up 27.8%, and Gram negative bacteria consisted of 5.5%. 4) No significant difference was found peritionitis occurrence according to general and management characteristics. Lower peritionitis occurrence were shown with those who had spouses or family members conducting CAPD management as opposed to self-managing patients(p=0.037). Conclusion: Elderly patients there needs to be the participation of family or other support resources rather than subjecting them to self-management of solution exchange and entry/exit. Also, The high occurrence rate from Gram positive bacteria is shown so the importance of CAPD management education including bathing and hand washing needs to be emphasized.

• Journal of the Korean earth science society
• /
• v.22 no.5
• /
• pp.339-349
• /
• 2001

The aim of this study is to explore effective teaching strategies through an investigation of the problem-solving abilities and reasons for the unsuccessful problem solving of pre-service teachers. The participants of the study were 60 pre-service teachers who were expected to teach earth science in elementary school (40) and secondary school (20). The participants had taken a course in astronomy before they took part in the present study. The instruments for the study were a paper-and-pencil test and interviews. The results demonstrated that the pre-service teachers' abilities to solve problems were low. The pre-service teachers of the elementary school were inferior to those of the secondary school in their problem solving abilities. The causes for the unsuccessful problem solving were identified as follows: (1) lack of prerequisite knowledge to understand the motions of the moon and the planets, (2) failure to represent problems based on solution principles, (3) failure to apply the knowledge acquired in one setting to another, different setting, (4) frames of reference the frameworks for everyday life situation and for earth science problem situation, and (5) rote-memorization of facts rather than understanding the cause-and-effect relationships. The above causes for unsuccessful problem solving seemed to be related to the characteristics of novice problem solvers in general and of the tasks about the motions of the moon and the planets. Suggestions are made to enhance pre-service teachers' problem solving abilities based on the result of the study.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.5
• /
• pp.231-240
• /
• 2015

Medical imagery require to protect the privacy with preserving the quality of the original contents. Therefore, reversible watermarking is a solution for this purpose. Previous researches have focused on general imagery and achieved high capacity and high quality. However, they raise a distortion over entire image and hence are not applicable to medical imagery which require to preserve the quality of the objects. In this paper, we propose a novel reversible watermarking for medical imagery, which preserve the quality of the objects and achieves high capacity. First, object and background region is segmented and then predicted error histogram-based reversible watermarking is applied for each region. For the efficient watermark embedding with small distortion in the object region, the embedding level at object region is set as low while the embedding level at background region is set as high. In experiments, the proposed algorithm is compared with the previous predicted error histogram-based algorithm in aspects of embedding capacity and perceptual quality. Results support that the proposed algorithm performs well over the previous algorithm.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.423-429
• /
• 2008

Application of manganese-impregnated activated carbon(Mn-AC) in the treatment of synthetic wastewater containing both organic and inorganic contaminants was investigated. Phenol and As(III) was used as representative organic and inorganic contaminants, respectively. When the stability of Mn-AC at acidic condition was evaluated with variation of solution pH ranging from 2 to 4, Mn-AC was unstable below pH 3, while negligible dissolution of Mn was observed above pH 4. This stability test suggests a plausible applicability of Mn-AC in the treatment of wastewater above pH 4. Compared to AC-alone, the adsorption rates of phenol as well as adsorbed amounts of phenol by Mn-AC were slightly decreased due to the decrease of the surface area by impregnation. The maximum adsorbed amount of phenol by Mn-AC was corresponds to 75% of that by AC-alone from the adsorption isotherm study. The oxidation efficiency of As(III) by Mn-AC was greater than that by AC-alone at lower pHs while reverse trend was observed as pH increased above 7. From this work, it was found that Mn-AC could be used in the simultaneous treatment of both phenol and As(III).

• Current Photovoltaic Research
• /
• v.4 no.3
• /
• pp.108-113
• /
• 2016

III-V compound semiconductor based thin film solar cells promise relatively higher power conversion efficiencies and better device reliability. In general, the thin film III-V solar cells are fabricated by an epitaxial lift-off process, which requires an $Al_xGa_{1-x}As$ ($x{\geq}0.8$) sacrificial layer and an inverted solar cell structure. However, the device performance of the inversely grown solar cell could be degraded due to the different internal diffusion conditions. In this study, InGaP/GaAs double-junction solar cells are inversely grown by MOCVD on GaAs (100) substrates. The thickness of the GaAs base layer is reduced to minimize the thermal budget during the growth. A wide band gap p-AlGaAs/n-InGaP tunnel junction structure is employed to connect the two subcells with minimal electrical loss. The solar cell structures are transferred on to thin metal films formed by Au electroplating. An AlAs layer with a thickness of 20 nm is used as a sacrificial layer, which is removed by a HF:Acetone (1:1) solution during the epitaxial lift-off process. As a result, the flexible InGaP/GaAs solar cell was fabricated successfully with an efficiency of 27.79% under AM1.5G illumination. The efficiency was kept at almost the same value after bending tests of 1,000 cycles with a radius of curvature of 10 mm.