• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.329-337
• /
• 2010

In this study, we analyzed the end-of-chapter questions in 8 types of chemistry II textbooks for science teachers according to revised Bloom's taxonomy of educational objectives not only to raise interests of questions in textbooks but also acquire a basic material for using questions in textbooks effectively. The results of classification following Bloom's cognitive category showed that 'Understanding(44.7%)' level was the most, then 'Application(29.9%)', Knowledge(15.6%) and 'Analysis (9.5%)' in order, which is distinct difference from the result of classification of the end-of-chapter questions in college general chemistry books which was 'Application', 'Analysis' and 'Understanding' in order. Especially, questions of 'Evaluation' level were not found at all in any textbook investigated and 'Synthesis(0.3%)' level was very few. On the other hand, the percentage of questions in 'Understanding' and 'Executing Quantitative' which required specific algorithms was 70% of total with most of the questions in 'Application' were 'Executing Quantitative'.

• Journal of the Korean Chemical Society
• /
• v.65 no.5
• /
• pp.347-357
• /
• 2021

The purpose of this study is to compare and analyze the science curriculum of Korea and Estonia with a focus on the chemistry domain, and draw implications for reference when revising the next curriculum. To this end, the overall curriculum design centered on science subjects and the core concepts of chemistry covered in subjects corresponding to the common curriculum of the two countries were compared. As a result of the analysis, first, Estonia specifically suggested how the core competencies suggested in the general lecture were specifically connected to science subject. In addition, there was a characteristic that the inquiry function, attitude, and value were specifically presented in the curriculum document. Second, as a result of analyzing the core concepts of chemistry, most of the concepts dealt with in Korea were also dealt with in Estonia. However, Estonia has a tendency to deal more qualitatively with broader concepts. The concepts covered in the chemistry subject exceeded the level of the common curriculum in Korea, but this subject also had the characteristic of attempting a qualitative approach.

• Journal of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.307-313
• /
• 1979

Seven new hydrazine derivatives were prepared from N-Aryllsufonylbenzimidoyl chloride. These were: ${\beta}-({\alpha}-Benzenesulfonamidobenzal)hydrazine\;(II),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)dimethylmethylenehydrazine\;(III),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)phenylhydrazine\;(VII),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-4-nitrophenylhydrazine\;(VIII),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-2,4-dinitrophenylhydrazine\;(IX),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)dimethylhydrazine\;(X),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-p-methylphenylhydrazine\;(XI)$. The structure of these derivatives were identified by elemental analysis, spectral data and other chemical methods. In general, it was found that the yields of these reactions were significantly improved in polar solvent and by the electron attracting substituents in phenylhydrazine.

• Mass Spectrometry Letters
• /
• v.6 no.1
• /
• pp.7-12
• /
• 2015

In the present study, we proposed a simple ESI-MS model for determining $Zn^{2+}$ binding (or dissociation) constants for zinc finger peptides (ZFPs) with a unique ${\beta}{\beta}{\alpha}$ fold consensus. The ionization efficiency (response) factors for this model, i.e., ${\alpha}$ and ${\beta}$, could be determined for ZiCo ZFP with a known $Zn^{2+}$ binding constant. We could determine the binding constants for other ZFPs assuming those with a ${\beta}{\beta}{\alpha}$ consensus conformation have the same ${\alpha}/{\beta}$ response ratio. In general, the ZPF dissociation constants exhibited $K_d$ values of $10^{-7}{\sim}10^{-9}M$, while $K_d$ values for a negative control non-specific $Zn^{2+}$ peptides were high, e.g., $5.5{\times}10^{-6}M$ and $4.3{\times}10^{-4}M$ for BBA1 and melittin, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.366-367
• /
• 2006

In general, HF chemistry lifts off the particles during scrubbing after polishing and effectively removes particles. It is sometimes impossible to apply HF chemistry on W plug due to the degradation of electrical characteristics of a device. In this paper, a post W CMP cleaning process is proposed to remove residue particles without applying HF chemistry. After W CMP, recessed plugs are created, therefore they easily trap slurry particles during CMP process. These particles in recessed plug are not easy to remove by brush scrubbing when $NH_4OH$ chemistry is used for the cleaning because the brush surface can not reach the recessed area of plugs. Buffing with oxide slurry was followed by W CMP due to its high selectivity to W. The buffing polishes only oxide slightly which creates higher plug profiles than surrounding oxide. Higher profiles make the brush contact much more effectively and result in a similar particle removal efficiency even in $NH_4OH$ cleaning to that in HF brush scrubbing.

• Carbon letters
• /
• v.6 no.3
• /
• pp.166-172
• /
• 2005

The objective of this study was to investigate the possibility of application for water treatment using the zeocarbon. The zeocarbon was mixture of zeolite and activated carbon. In general, the application of commercial zeocarbon to water treatment is difficult because of weak strength in water and the high pH value of effluents after water treatment. Therefore, we have modified the surface of zeocarbon. For the surface modification, we used the acid treatment to make surface functional group. As a result of modification, was created functional group on zeocarbon surface and was formed mesopore in zeocarbon. The surface modified zeocarbon was applied to removal of nitrogen. In removal experiments of nitrogen, removal efficiency was very high. And, strength of zeocarbon after water treatment and pH of effluents were stabilized. This indicates that the surface modified zeocarbon was easy to recover and reuse. Consequently, our results were shown the possibility of application for water treatment using the surface modified zeocarbon.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.93-98
• /
• 1995

The rate constant of Nucleophilic addition of sodium thiophenoxide to nitrone were determined by UV Spectrophotometry and a rate equation which can be applied over wide pH range was obtained. Base on the rate equation, general base effect, substituent effect and final product, plausible mechanism of addition reaction have been proposed. Blow pH 3.0, the reaction was initiated of thiophenol, and in the range of pH $3.0{\sim}10.0$, proceeded by the competitive addition of thiophenol and thiophenoxide anion. Above the pH 10.0, the reaction proceeded through the addition of a thiophenoxide anion.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.7-11
• /
• 1969

Mucor-rennin, the crystalline milk-clotting enzyme, isolated from Mucor pusillus var. Lindt, has an acid protease activity. The optimum pH for the digestion of k-casein is 4.5, while that for hemoglobin digestion is 4.0. The skim milk solution was easily clotted acidic solution than alkalin solution, and the milk clotting activated by Ca ion. The enzyme was heat stable against heat from pH 4.0 to 6.0 but was more stable at pH 5.0. The activity of the enzyme at pH 5.0 did not decrease at 30 C for 15 days and the activity was not effected by sodium propionate and salicilic acid. Therefore, the enzyme of liguid type could store for a long time and could be transported from Erzyme production Co. to Manufacture of cheese Co. by adding the antiesptic and by adjusting pH to 5.0.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.287-292
• /
• 1999

The conducting composites were prepared by solution blending of polyaniline (PANI) as a conducting polymer and polycarbonate (PC) as a matrix in chloroform. Also the composites film was prepared by solution casting method. The PANI was protonated with alkylbenzenesulfonic acids, such as camphorsulfonic acid (CSA) or dodecylbenzenesulfonic acid (DBSA). The electrical conductivity of composites prepared by solution casting was enhanced compared with that of compression molding. The electrical conductivity, tensile strength and morphology were observed as a function of the amount of protonating agent as well as PANI complex content. In general, as the PANI complex content was increased, the electrical conductivity increased. In the case of the composite film containing 25 wt % of PANI complex doped with DBSA, the electrical conductivity exhibited 3.18 S/cm.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1305-1310
• /
• 2007

A conjugated spirocyclic polymer was synthesized via the cyclopolymerization of 1,1-dipropargyl-1- silacyclohexane with various transition metal catalysts. The monomer, 1,1-dipropargyl-1-silacyclohexane was synthesized by Grignard reaction of 1,1-dichloro-1-silacyclohexane with propargyl magnesium bromide. This polymerization proceeded well to give the corresponding poly(1,1-dipropargyl-1-silacyclohexane). The catalytic activity of WCl6 was found to be similar with that of MoCl5. The structure of polymer having the conjugated backbone with silacyclohexane moieties was characterized by such instrumental methods as NMR (1H-, 13C-), IR, and UV-visible spectroscopies. The resulting polymers were mostly yellow or light-brown powders, depending on the catalyst systems used. This polymer was completely soluble in halogenated and aromatic hydrocarbons such as chloroform, 1,2-dichloromethane, benzene, toluene, and chlorobenzene, etc. The thermal and oxidative stabilities of polymer were also studied and discussed.