• Membrane and Water Treatment
• /
• v.7 no.3
• /
• pp.209-221
• /
• 2016

As a highly hydrophilic fibrillar mineral in nature, attapulgite (ATP) is a promising new additive for preparation of ultrafiltration (UF) hybrid membrane. In this work, ATP particles, which were grafted with a new Gemini surfactant of Ethyl Stearate-di(octadecyl dimethyl ammonium chloride) to detach the crystal bundles to single crystal and enhance the uniform dispersion in an organic polymer matrix, were incorporated into poly(vinylidene fluoride) (PVDF) matrix, and PVDF/Gemini-ATP hybrid membranes for adsorptive removal of Ni(II) ions from aqueous solution were prepared via a phase inversion method. Chemical composition, crystalization and morphology of the modified ATP were characterized by Fourier transform infrared spectroscopy (FTIR), Transmission electron microscope (TEM) and X-ray diffraction (XRD), respectively. The morphology of the hybrid membrane was characterized by Scanning electron microscopy (SEM), the performance of permeability, hydrophilicity and adsorption of Ni(II) ions were studied, and the adsorption kinetics of the PVDF/ATP hybrid membranes were particular concerned. The results showed that the hybrid membrane displayed a good thermal stability and hydrophilicity. Comparing with PVDF membrane, the hybrid membrane possessed good adsorption capacity for Ni(II) ions, and the adsorption kinetics fit well with Lagergren second-order equation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.129-132
• /
• 2000

In this research, we proposed the immobilization zone where the organic contaminant would be fixed, so that ground water could be prevented from the organic contaminants. The surfactant was adsorbed on the soil particles and the organic contaminants were partitioned into the hydrophobic tails of the surfactant in the immobilization zone. Surfactants with different molecular structures-SDDBS (sodium dodecylbenzenesulfonic acid), MADS (monoalkylated disulfonated diphenyl oxide), DADS (dialkylated disulfonated diphenyl oxide) - were used in this study. Up to the present, the research on the immolization simulated the saturated condition. But many site contaminated with organic contaminants and the zones where immobilization would be applied are unsaturated. In this research, in order to investigate the behaviors of surfactants and organic contaminants in unsaturated condition, the unsaturated columns were experimented, and their results were compared with the saturated case.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.565-568
• /
• 1998

Amphipathic compounds (bis-sulfonate Gemini type) with double or triple long chain alkyl groups were prepared by the reaction of N-(long chain acyl)diethanolamine diglycidyl ethers with fatty alcohols, followed by the reaction with propanesultone. All these new Gemini type surfactants were soluble in water and showed much better micelle forming ability and lowering surface tension than sodium dodecyl sulfonate with one sulfonate group. cmc and ${\Upsilon}$ cmc values of the triple-chain compounds were still much smaller than those of the corresponding double-chain compounds with two common alkyl groups. The efficiency of adsorption at the water/air interface ($pC_{20}$) of these surfactants was very high. Their foaming properties, wetting ability toward a felt chip, and lime-soap dispersing requirement (LSDR) were measured. Their initial foaming properties were high but showed good low foam stability, wettability and LSDR.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.107-114
• /
• 2005

Molecular aggregates of surfactant molecules consisting of one or more bilayers arranged in a hollow, closed, usually spherical geometry are termed “esicles”or “iposomes” In recent years it has been found that in certain systems the vesicular structure forms spontaneously and is long lived, and it has been suggested that these structures may in fact constitute the equilibrium state in these cases (as is true of micelles) This paper deals with the mixed CMC, vesicles, phase behavior, phase transition, geometrical structure, their formation and characterization in the aqueous solutions of mixed cationic/anionic surfactants systems. TEM micrographs revealed that the vesicles were of spherical shape and that their size was of around 180 nm. The zeta potentials are positive at CGS1-rich regions and negative at SLES-rich regions. In the region where SLES/CGS1 (6/4), the zeta potentials are very small, implying that the vesicles at this surfactant ratio may be less stable. At other surfactant ratios, the vesicles are thought to be stable, supported by large absolute values of zeta potentials and little change in UV absorbance for several months.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.77-81
• /
• 1998

Surface active properties of these aqueous Gemini surfactant solutions including surface tension, critical micelle concentration(cmc), foaming power, foam stability, emulsifying power and Krafft point were measured at given conditions. They showed excellent properties, being compared with conventional single-chain surfactants such as sodium dodecyl sulfonate(SDS). Their surface tensions in the aqueous solutions were decreased to $30{\sim}38$ mN/m, which is lower than 39 mN/m of SDS, and their cmc values evaluated by surface tension method were $2.8{\times}10^{-5}{\sim}3.3{\times}10^{-4}$ mol/L. These values were also much lower than that of SDS, $9.8{\times}10^{-3}$ mol/L. The foaming power and foam stability, especially decyl and dodecyl compounds, were good and the emulsifying power in benzene or soybean oil was also excellent. All of the synthesized Gemini surfactants possessed good water solubility and their Krafft points were all below $0^{\circ}C$. As results, DDED and DDOD, Gemini surfactants which were synthesized are expected to be applied as foamers, emulsifiers and so on.

• Journal of the Korean Chemical Society
• /
• v.60 no.4
• /
• pp.257-260
• /
• 2016

A new perfluorobutyl substituted cyclic type disodium alkanesulfonate is designed, synthesized and characterized as alternative substance to perfluorooctane sulfonic acid (PFOS, 1), a well-known surfactant. Cylic type sulfonate was accomplished from commercially available 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol in four steps. Bio-degradable perfluorobutyl moiety was introduced from fluorous diol, which is symmetrically substituted amphiphile via installation of an intermediate trifluoromethanesulfonyl ester and easily manipulated by double displacement of triflate using potassium malonate and further reduction followed by nucleophilic ring opening are key reactions to get target disodium alkanesulfonate. The efficiency and simplicity in the synthesis of this material offer a new strategy to design PFOS alternatives.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.369-375
• /
• 2004

In this study, liquid crystalline (LC) is formed using Gemini surfactant (GS) type and moisturizing effect in vivo is measured. $3.0\;wt\%$ of sodium dicocoyl ethylene diamine (PEG)-15 sulfate (SCD-PEG-15S) is used as GS and $4.0\;wt\%$ of hydrogenated dimer acid esters (HDAE) as booster. For stabilizers, $2.0\;wt\%$ of behenyl alcohol (BA) and $1.0\;wt\%$ of Iyso-lecithin (LyL) are utilized. It is stabilized in pH from 4.0 to 10.5 and the best condition is in pH 6.5. The value of viscosity is $8,000\pm500$ cP. The most excellent particles are formed within the range of 4.0 to 15.5 um. Formed LC is observed around LC particles using polarization microscope. It is also observed that lamellar gel network structure is formed around LC particles. Moisturizing effect is improved by $13.6\%$ (P<0.05) compared to control when measured 30 min later after coating samples. After 1 h, moisturizing effect is improved by 1$12.6\%$ (P<0.05) than control while showing $28.3\%$ (P<0.05) of improvement after 4 h. These results may be caused from that manufactured LC forms lamellar structure so that it has better water-holding ability and absorbance of oil increases. This formula could be utilized by delivery system (DS) on skin so that this technology can be applied for manufactuing pharmaceuticals and cosmetics.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.454-459
• /
• 2017

In this study, aqueous acrylic emulsion adhesives were prepared using various surfactants and their properties were also investigated. Solids content, conversion, particle size distribution and initial adhesion properties of the prepared adhesives were compared with each other. The solid content of the adhesives was evaluated 60% and the conversion rate of the emulsion polymerization was 97% at 2 wt% concentration of synthesized surfactants. The particle size distribution analysis revealed that the size distribution of adhesive particles was 290~470 nm when the synthesized cationic surfactant was added. The initial adhesion and adhesion time were also improved. The maximum adhesive strength was found to be 2.55 kgf when using a single surfactant (POE 23), and superior to that of using other surfactants. It was confirmed that the corrosion inhibition of the adhesive prepared by adding the cationic gemini surfactant was maintained for 48 hours.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.461-477
• /
• 2017

Organosilicone-based surfactants, consisting of hydrophobic organosilicone groups coupled to hydrophilic polar groups, have been widely used in many industrial fields starting from polyurethane foam to construction materials, cosmetics, paints & inks, agrochemicals, etc., because of their low surface tension, lubricity, spreading, water repellency and thermal and chemical stability, resulted from the unique properties of organosilicone. Especially, organosiloxane surfactants, having low molecular weight siloxane as hydrophobe, exhibit low surface tension and excellent wettability and spreadability, leading to their applications as super wetter/super spreader, but have the disadvantage of vulnerability to hydrolysis. A variety of low molecular weight siloxane surfactant structures are required to provide the functional improvement and the defect resolution for reflecting the necessities in the various applications. This review includes the synthetic schemes of reactive tetrasiloxanes and disiloxanes as hydrophobic siloxane backbones, the main reaction schemes, such as hydrosilylation reaction, for coupling reactive tetrasiloxanes or disiloxanes to hydrophilic groups, and the main synthetic schemes of the tetra- and di-siloxane surfactants having polyether-, carbohydrate-, gemini-, bola-type surfactant structures.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.2
• /
• pp.39-46
• /
• 2003

An immobilization zone can be constructed by modifying soils in the vadose zone with surfactants, which can be used to promote retardation of organic contaminants in the subsurface. Column experiments were conducted to investigate the behavior of surfactants and organic contaminants in unsaturated and saturated conditions with different water contents (25%, 50%, 75%, 100%). Transport and sorption of surfactant (dialkylated disulfonated diphenyl oxide) in the columns containing aluminum oxide was similar under the conditions at different water contents. However, transport of a model organic compound (naphthalene) was retarded as the water content decreased by enhanced partitioning of the compound into the surfactants that were sorbed on the aluminum oxide. This suggests that the immobilization method could well be applied to vadose zone as well as to saturated zone.