• 자원리싸이클링
• /
• 제26권6호
• /
• pp.84-90
• /
• 2017

저품위 동 함유 슬러지로부터 회수된 동 조금속을 황산구리 전해액에서 전해정련을 수행하여 고순도 동을 회수하고자 하였다. 유기첨가제 종류 및 농도에 따른 전해정련동 표면 형상 및 조도를 분석하였을 때, gelatin계 유기첨가제 5 ppm 및 thiol계 유기첨가제 5~10 ppm 혼합 조건에서 가장 우수한 표면 형상을 얻을 수 있었다. 건식환원공정을 통해 회수한 철(Fe), 니켈(Ni), 코발트(Co) 및 주석(Sn) 등의 불순물이 함유된 각 86.635, 94.969 및 99.917 wt.% 순도의 동 조금속을 사용하여 전해정련하였고, 순도 3N~4N급 전해정련동을 얻을 수 있었다. 동 조금속, 전해액, 전해정련동의 불순 원소 농도 및 동 순도 등의 분석을 통해, 순도 99.99 wt.% 이상 전해정련동을 회수할 수 있는 전해정련 공정시간 및 동 조금속 순도를 도출하였다.

• 동아시아식생활학회지
• /
• 제16권5호
• /
• pp.564-572
• /
• 2006

The application of Consomm prepared with different ingredients of ground beef and ground chicken ingredients to improve the taste preferences and reduce saving the food cost of Consomm was attempted by reviewing fundamental data and its examining the effect on the physicochemical characteristics of treatment. These treatments were prepared with the following different ratios (9:1, 7:3, 5:5, 3:7, 1:9 ; w/w) of ground beef to and ground chicken: 9:1, 7:3, 5:5, 3:7, and 1:9, w/w, respectively. Gelatin contents were increased significantly with by increasing the mixed ratio of ground chicken. The free sugars identified from Consomm were, glucose, fructose, and sucrose. Free sugar contents, increased significantly by with increasing the mixed ratio of ground beef. (Ed- what are the highlighted treatments? You need to explain in this abstract otherwise the reader doesn't know. For simplicity I suggest you don't use such nomenclaturehere in the abstract and simplify with merely the weight ratios. Confirm the changes that I've made) The highest and lowest free sugars werewas shown at A9:1 and 1:9 treatments, respectively whereas the lowest value was shown at I treatment. As many as 20 different kinds of free amino acids were detected infrom the Consomm and the amount of total amino acids waswere increased with by increasing the mixed ratio of ground chicken. The contents of arginine, glutamic acid and alanine contents were high in the free amino acids of Cconsomm prepared with different ingredients. The In the changes of mineral contents in the Consomm prepared with different ingredients, the mineral showed high contents increased according to in the following order of: K, Na, P, Mg, Ca, Fe, and Zn. From the The results of analysis results, in the Relatin contents, free sugars, free amino acids and mineral contents were all increased with by increasing the mixed ratio of ground chicken. The 7:3 treatment showed From above results, it was showed that B treatment prepared with a ratio of 1 ground beef to 3 ground chicken was the bestmost preferred in physicochemical qualities.

• Safety and Health at Work
• /
• 제1권2호
• /
• pp.183-191
• /
• 2010

Objectives: The objective of this study is to investigate the distribution patterns and exposure concentrations of bioaerosols in industries suspected to have high levels of bioaerosol exposure. Methods: We selected 11 plants including 3 livestock feed plants (LF industry), 3 metal working fluids handling plants (MWFs industry), and 5 sawmills and measured total airborne bacteria, fungi, endotoxins, as well as dust. Airborne bacteria and fungi were measured with one stage impactor, six stage cascade impactor, and gelatin filters. Endotoxins were measured with polycarbonate filters. Results: The geometric means (GM) of the airborne concentrations of bacteria, fungi, and endotoxins were 1,864, $2,252\;CFU/m^3$, and $31.5\;EU/m^3$, respectively at the sawmills, followed by the LF industry (535, $585\;CFU/m^3$, and $22.0\;EU/m^3$) and MWFs industry (258, $331\;CFU/m^3$, and $8.7\;EU/m^3$). These concentrations by industry type were significantly statistically different (p < 0.01). The ratio of indoor to outdoor concentration was 6.2, 1.9, 3.2, and 3.2 for bacteria, fungi, endotoxins, and dust in the LF industry, 5.0, 0.9, 2.3, and 12.5 in the MWFs industry, and 3.7, 4.1, 3.3, and 9.7 in sawmills. The respiratory fractions of bioaerosols were differentiated by bioaerosol types and industry types: the respiratory fraction of bacteria in the LF industry, MWF industry, and sawmills was 59.4%, 72.0%, and 57.7%, respectively, and that of fungi was 77.3%, 89.5%, and 83.7% in the same order. Conclusion: We found that bioaerosol concentration was the highest in sawmills, followed by LF industry facilities and MWFs industry facilities. The indoor/outdoor ratio of microorganisms was larger than 1 and respiratory fraction of microorganisms was more than 50% of the total microorganism concentrations which might penetrate respiratory tract easily. All these findings suggest that bioaerosol in the surveyed industries should be controlled to prevent worker respiratory diseases.

• 생명과학회지
• /
• 제20권5호
• /
• pp.736-744
• /
• 2010

도라지는 민간에서 항궤양, 항진통, 항알러지, 혈관과 히스타민 억제 및 항산화 효과가 있는 것으로 알려져 있고, 그 뿌리인 길경은 아시아에서 식용으로 즐겨먹는 식품 소재로 사포닌이 과량 함유되어 있는 것으로 보고 되어 있으나, 그 작용기전은 과학적으로 해명되지 않았다. 본 연구에서 처음으로 흑도라지가 특정한 공정기술을 이용하여 개발되었으며, 산화적 스트레스 및 MMPs) 대한 ABPRE의 억제 효과를 조사하였다. ABPRE의 항산화효과를 조사하기 위해서 DPPH radical, hydroxyl radical, reducing power, hydrogen peroxide, lipid peroxidation 및 DNA 산화에 대한 연구를 수행하였다. 연구 결과 ABPRE는 DPPH radical 소거에는 효과를 나타내었으나 지질과산화에 의한 malondialdehyde의 생성은 억제하지 않았다. 그러나, ABPRE의 존재 하에서 산화적 DNA 손상이 억제되었다. 또한 gelatin zymography 및 western blot 분석에서 ABPRE는 PMS (phenazine methosulfate)에 의해서 자극된 MMP-2의 발현과 활성을 감소시켰으며, ABPRE는 항산화 효과 및 tyrosinase 발현 억제에 의한 L-DOPA로 유발된 melanin 생성을 저해 하였을 뿐만 아니라 Nrf2에 의해서 조절되는 항산화 효소인 SOD-1과 SOD-2의 발현을 증가시키는 것으로 나타났다. 그러므로 ABPRE는 항산화와 관련 있는 암전이의 예방을 위한 항암제의 후보 소재로 그 가능성이 기대된다.

• 한국식품영양과학회지
• /
• 제21권2호
• /
• pp.213-218
• /
• 1992

식품의 동결중에 생성되는 빙결정의 크기에 미치는 동결조건의 영향을 조사하고 그 관계를 정량적으로 평가함과 아울러 동결조건과 빙결정 분산구조와의 관계를 이론해석에 의해 조사한 결과, 1. 동결이동속도 u는 생성빙결정의 평균경 d$_{p}$와 u .d$_{p}$/D~constant의 관계에 있음을 간단한 차원해석에 의해 예측이 가능하였다. 2. 2% 한천 겔, 5%한천 겔, 20% 젤라틴 겔, 돈육의 순서로 동결점에 도달하는 시간이 빨라지며 동결시간 및 최대빙결품 생성대의 통과시간은 냉매온도와 선형적인 관계를 나타내었다. 3. 대두 단백질 겔중에 생성되는 빙결정의 평균경 d$_{p}$와 동결계면 이동속도 u 는 반비례 관계를 나타내었으며, 이로부터 구해진 u .d$_{p}$의 값은 3.4$\times$$10^{-6}$ $\textrm{cm}^2$/sec로 예측 이론식이 유효한 것으로 사료되었다. 4. 동결보존중의 대두 단백질 겔 내부에 생성된 빙결정의 성장에 미치는 보존온도의 영향을 조사한 결과, 양자가 빙결정의 성장에 미치는 영향은 거의 없는 것으로 나타났다. 5. 동결조건과 동결계면구조와의 사이에 Moving velocity of freezing front= (Mass transfer rate of water at freezing front)$\times$ (Surface area of freezing front) 의 관계를 나타내었다.

• Journal of Pharmaceutical Investigation
• /
• 제29권3호
• /
• pp.227-234
• /
• 1999

Solid dispersions were prepared to increase the dissolution rate of biphenyl dimethyl dicarboxylate (DDB) using water-soluble carriers such as povidone, copolyvidone, $2-hydroxypropyl-{\beta}-cyclodextrin (HPCD)$, sodium salicylate or sodium benzoate by solvent evaporation method. Solid dispersions were characterized by infrared spectrometry, differential scanning calorimetry (DSC) and powder X-ray diffractometry, dissolution and permeation studies. DDB tablets (7.5 mg) were prepared by compressing the powder mixtures composed of solid dispersions, lactose, com starch, crospovidone and magnesium stearate using a single-punch press. DDB capsules (7.5 mg) were also prepared by filling the mixtures in empty hard gelatin capsules (size No.1). From the DSC and powder x-ray diffractometric studies, it was found that DDB was amorphous in the HPCD or copolyvidone solid dispersions. Dissolution rates after 10 min of DDB alone and solid dispersions (1 : 10) in sodium benzoate, sodium salicylate and copolyvidone were 11.8, 23.5, 22.8 and 82.5%, respectively. Dissolution rates of DDB after 30 min from 1 : 10 and 1 : 20 copolyvidone solid dispersions were 80.5 and 95.0%, respectively. For the DDB tablets prepared using solid dispersions (1 : 20), the initial dissolution rate was dependent on carrier material, and was ranked in order, $Kollidon\;30\;{\ll}$ copolyvidone < HPCD. For the HPCD solid dispersion tablets, dissolution rate reached 97.4% after 15 min, but thereafter slowly decreased to 80.7% after 2 hr due to the precipitation of DDB. However, in the case of copolyvidone solid dispersion tablets, dissolution increased linearly and reached 93.4% after 2 hr. Reducing the volume of test medium from 900 to 300 ml markedly decreased the dissolution rate of the tablets containing 1 : 20 HPCD solid dispersions and 1 : 10 copolyvidone solid dispersion. For 1 : 20 copolyvidone solid dispersion tablets, there was no significant change in dissolution rate up to 1 hr with different volumes of test medium. Preparation of the copolyvidone solid dispersion (1 : 20) in capsules markedly delayed the dissolution (31.2 % after 2hr) due to the limited diffusion within capsules. The permeation rate $(13.4\;g/cm^2\;after\;8\;hr)$ of DDB through rabbit duodenal mucosa from copolyvidone solid dispersion (1 : 10) was markedly enhanced, when compared with drug alone or physical mixtures. From overall findings, DDB formulations containing copolyvidone solid dispersions (1 : 20) could be used to remarkably improve the dissolution rate in dosage form of powders and tablets.

• 환경생물
• /
• 제27권1호
• /
• pp.58-65
• /
• 2009

Naringenin은 flavonoid구조의 감귤류 과피에 다량 함유되어 있으며 항암 및 항산화 등의 다양한 생리활성을 가지는 것으로 보고되었다. 이에 본 연구에서는 HT-1080 섬유육종세포의 전이에 대한 영향을 조사하였다. 먼저 Naringenin이 암세포의 이동에 미치는 영향을 알아보기 위해 migrationassay를 한 결과, Naringenin이 암세포의 이동을 농도 의존적으로 억제시켰다. 암의 전이에 있어서 매우 중요한 역할을 하는 단백질분해효소인 matrix metalloproteinase-9 (MMP-9)의 활성도를 측정하기 위해 gelatin zymography를 한 결과, Naringenin이 PMA에 의해 증가된 MMP-9의 효소 활성도를 농도 의존적으로 감소시켰다. 또한 MMP-9와 TIMP-1의 유전자 발현에 대한 Naringenin의 영향을 RT-PCR방법으로 조사한 결과, Naringenin이 PMA에 의해 증가된 MMP-9의 mRNA발현을 농도 의존적으로 감소시켰으나 TIMP-1의 mRNA발현에는 변화가 없었다. MMP-9발현 감소에 관여하는 전사조절인자를 확인하기 위해 promoterassay를 한 결과, Naringenin이 PMA에 의해 증가된 MMP-9 및 NF-$\kappa$B, AP-1의 Promoter활성을 농도 의존적으로 감소시 켰다. 또한 MMP-9의 전자조절인자인 NF-$\kappa$B와 AP-1의 결합 활성도를 electrophoretic mobility shift assay로 확인한 결과 Naringenin이 PMA에 의해 증가된 NF-$\kappa$B와 AP-1의 결합 활성도를 농도 의존적으로 감소시켰다. 결론적으로 Naringenin이 전사조절인자인 NF-$\kappa$B와 AP-1의 활성을 억제함으로써 MMP-9의 유전자 발현 및 효소 활성을 억제하고 그 결과 암세포의 이동과 침윤을 억제하는 것을 알 수 있다.

• Reproductive and Developmental Biology
• /
• 제33권3호
• /
• pp.171-177
• /
• 2009

Spermatogonial stem cells(SSCs) only are responsible for the generation of progeny and for the transmission of genetic information to the next generation in male. Other in vitro studies have cultured SSCs for proliferation, differentiation, and genetic modification in mouse and rat. Currently, information regarding in vitro culture of porcine Germline Stem Cell(GSC) such as gonocyte or SSC is limited and is in need of further studies. Therefore, in this study, we report development of a successful culture system for gonocytes of neonatal porcine testes. Testis cells were extracted from $10{\sim}14$-day-old pigs. These cells were harvested using enzymatic digestion, and the harvested cells were purified with combination of percoll, laminin, and gelatin selection techniques. The most effective culture system of porcine gonocytes was established through trial experiments which made a comparison between different feeder cells, medium, serum concentrations, temperatures, and $O_2$ tensions. Taken together, the optimal condition was established using C166 or Mouse Embryonic Fibroblast(MEF) feeder cell, Rat Serum Free Medium(RSFM), 0% serum concentration, $37^{\circ}C$ temperature, and $O_2$ 20% tension. Although we discovered the optimal culture condition for proliferation of porcine gonocytes, the gonocyte colonies ceased to expand after one month. These results suggest inadequate acquirement of ingredients essential for long term culture of porcine GSCs. Consequently, further study should be conducted to establish a successful long-term culture system for porcine GSCs by introducing various growth factors or nutrients.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.381-391
• /
• 1999

A new 5th generation adhesive system(ONE-STEP) has been supplied which operators can apply to conditioned tooth surfaces by one simplified step. The purpose of this study was to determine whether different methods of adhesive application and various air drying duration after applying adhesive affect the shear bond strength of composite resin to dentin, and to evaluate the adhesive pattern of composite resin and dentin under SEM. Seventy-seven extracted human molar teeth were cleaned and mounted in palstic test tubes. The occlusal dentin surfaces were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A.). Teeth were randomly divided into 7 groups (n=11), In experimental A group, adhesive was applied to dentin with agitation for 20 sec. In experimental N-A group, adhesive were continuously applied to dentin for 20 sec. Also control and experimental 1, 2, 3, 4 groups were dried for 10, 0, 5, 20, 30 seconds after applying adhesive, respectively, Adhesives were light cured for 10 sec. A gelatin capsule 5mm in diameter was filled with Aelitefil$^{TM}$ composite resin, placed on the treated dentin surface and light cured for 40 see, from three sides, All specimens were stored in distilled water at room temperature for 24 hours. The shear bond strengths were measured using a universal testing machine(AGS-1000 4D, Japan) at a crosshead speed of 5mm/min. An one-way ANOVA and LSD test were used for statistical analysis of the data. For SEM evaluation, seven specimens were made and sectioned. Representive postfracture and seven specimens were mounted on brass stubs, sputter-coated with gold and observed under SEM. The results were as follows : 1. The shear bond strength of experimental A group which adhesive were applied to dentin with agitation was higher than that of experimental N-A group (continuous application), and there was significant difference between two groups (p<0.01). 2. The interface between composite and dentin according to different application methods showed close adaptation in experimental A group and showed tinny gap in experimental N-A group. 3. The shear bond strength accoding to various air drying duration was the lowest value(7.57${\pm}$2.60 MPa) in experimental 1 group, so there was significant difference between experimental 1 group and other four groups (p<0.05). But there was no significant difference of shear bond strength between four groups (p>0.05). 4. The interface between composite and dentin according to various air drying duration showed close adaptation in control group and tinny gap in experimental 3 and 4 groups. But experimental 1 and 2 groups showed $30{\mu}$ and 6 - $10{\mu}m$ thick gaps, respectively.

• 한국토양비료학회지
• /
• 제38권5호
• /
• pp.287-293
• /
• 2005

본 연구에서는 농업용 미생물제 수요의 증가에 따른 보다 안정한 미생물제 공급과 규격화된 품질 보증 및 미생물제 생산성 확대를 위하여 식품 산업에서 활용되고 있는 미생물제의 미세캡슐화 기술을 응용하여, 농업용 미생물제 캡슐화 소재선발 및 캡슐화 최적조건을 조사하고 생산된 미생물 캡슐제의 생균력과 안정성에 관하여 검토하였다. 본 실험의 캡슐화 장치는 extrusion 기법에서 주로 사용되고 있는 air atomizing device 대신 저속의 연동펌프를 이용한 micro-nozzle 방식을 설계하여 수행하였다. 농용 미생물의 캡슐화 소재선발을 위해 bead 형성이 용이하며 생균력을 안정적으로 유지할 수 있고 저렴한 비용으로 구입이 가능한 캡슐제를 조사한 결과 Na-alginate와 K-carragenan은 bead 형성이 우수하게 나타났으며 캡슐내 생균수는 $5.3-7.4{\times}10^7cfu\;g^{-1}$로 gellan gum과 locust bean gum 등에 비하여 6배 이상 높은 생균수를 나타냈다. Na-alginate의 경우 캡슐이 매우 단단하고 매끄러웠으며, K-carragenan보다 7배 이상 저렴한 것으로 조사되었다. 이상 농업용 미생물제의 캡슐화 소재로서 Na-alginate를 사용하는 것이 가장 효율적이고 경제적이라 판단되었다. 농업용 미생물제의 캡슐화를 위한 최적의 캡슐화 소재로 1.5% 농도의 Na-alginate에 1.0% starch와 같은 안정제를 혼합하여 사용할 경우 생균력을 유지하는 데 보다 안정적이었다. 최적조건에서 형성된 캡슐의 형태를 관찰한 결과 캡슐의 표면구조는 매끈하고 규칙 바른 구형을 나타내었으며, 내부 구조는 비교적 균일한 polymatrix를 형성하였 으며 부분적으로 큰 공극을 형성하였다. 미세 캡슐 내 미생물 생존력을 유지하기 위한 캡슐막의 효과를 나타낼 수 있는 안정제로 저렴한 가격으로 구입이 용이한 starch와 zeolite를 이용하여 생균력 증진효과를 검토하였다. 세균을 이용한 미생물 캡슐체의 경우 starch와 zeolite 모두 약 70-80% 생균력을 나타내었으며, 효모의 경우 starch를 안정제로 이용한 경우 67%의 생균력을 나타내었으나 zeolite를 안정제로 첨가한 경우 80% 이상의 높은 생균력 증진을 나타내었다. 이상의 결과로부터 미생물을 캡슐화 할 경우 무기재료인 zeolite를 첨가할 경우 장기간 생균력 안정성이 유지되는 것으로 나타났다.