• 대한화장품학회지
• /
• 제22권2호
• /
• pp.167-173
• /
• 1996

The stability of gel structured emulsion and the effect of polyols on it have been studied by rheological property and interfacial tension. In this paper, three types of gel structured emulsions were prepared by using three polyols respectively(glycerine for sample 1, 1.3 BG for sample 2, PG for sample 3). And both complex modulus($G^*$) and loss angle[$\delta$ = tan-1(G"/G')] of samples were investigated against oscillating shear stress and frequency($\omega$). The results show sample 1 is most highly consistent with oscillating shear stress. And the results were compared with those of accelerated tests concerning storage stability of gel structured emulsion. To correlate consistency of rheological property with storage stability, interfacial tension from which adsorption efficiency of surfactant(Octyldodecyl Ether) could be known was measured. Sample 1 showed the largest value of [$d{\gamma}/dIn_{Cconc. of surfactant}$] in Gibbs equation. In summary, the prediction of stability could be correctly made by the consistency of rheological property(G*,$\gamma$) of gel structured emulsion against oscillating shear stress and it could be supported by measuring interfacial tension. And polyol affected the value of [$d{\gamma}/dIn_{Cconc. of surfactant}$], consequently affected the stability.lity.

• KSBB Journal
• /
• 제24권6호
• /
• pp.563-569
• /
• 2009

피브로인은 누에고치가 생산되는 불용성 단백질이다. 고온의 염화칼슘용액에서 가용화시킨 후 탈염하여 물에 녹게 만들 수 있다. 그러나 수용액은 불안정하여 피브로인 분자는 랜덤코일에서 $\beta$병풍구조의 비율이 증가하는 구조로 전이되고 겔을 형성한다. 그러나 피브로인 겔은 약하고 탄성이 없어 소재로 응용하는데 어려움이 있다. 본 연구에서는 글리세롤과 에탄올을 사용하여 반고형의 피브로인 겔을 제조하고 이들의 유동 특성을 조사하였다. 80%의 글리세롤로 만들어진 피브로인 겔은 의가소성 및 thixotropic 특성을 나타내었으며 항복응력의 제곱근 값이 피브로인의 농도와 선형적으로 비례하였으며 항복응력이 없어지는 피브로인의 농도는 0.2%로 확인되었다. 40% 에탄올에서 만들어진 피브로인 겔은 매우 심한 thixotropic 특성을 보였으며 전단속도가 어떤 값 이상이 되면 급격한 전단연화 현상을 나타내었다. 이 피브로인 겔은 전단이력 후 의가소성을 회복하는 특성을 나타내었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.30-30
• /
• 2002

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.351-358
• /
• 2011

It was researched to be alternative of TGIC type hardener with human hazard element as PT 910 mix powder paint with hardener. Generally PT 910 was compared with TGIC & Epoxy resin of hardener to be used at thermosetting powder paint. We inquired a property of matter for paint through Gel time, glass transition temperature, melting point and a property of matter for film through a property of adhesion, a property of tolerance, softness, gloss, acid-resistant, alkali-resistant, salt water spray-resistant, facilitation climatic. When PT 910 is used of hardener, it was shown the excellent results in gel time, softness, salt water spray-resistant, fracilitation climatic and the similar results in melting point, a property of tolerance, a property of adhesion, gloss, acid-resistant, alkali-resistant, as compared with the powder paint used by TGIC hardener. The glass transition temperature was little low. But there was slightly different results. After the study results, we reached the conclusion that thermosetting powder used by PT 910 is alterative to by TGIC hardener.

• 한국광학회지
• /
• 제11권4호
• /
• pp.255-260
• /
• 2000

유기 금속화합물을 출발물질로 이용하는 졸-겔 방법으로 균열이 없는 유기-무기 복합 실리카 박막을 제작하였으며, 코팅방법, 조성비, prebake, postbake 온도 등의 제작조건에 따른 박막의 두께 및 굴절률의 변화를 체계적으로 조사하여 재현성 있는 제작조건을 확립하였다. 특히 광개시제를 첨가하였을 때 자외선 노광량에 따른 광학적 성질변화를 세 가지 광개시제에 대하여 측정, 비교하였다. 또한 졸-겔 박막으로 다중모드 간섭을 이용한 광 파워 분배기를 제작하여 광소자로의 응용 가능성을 살펴보았다.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.373-376
• /
• 2012

Thin films of Ag-SiO2-TiO2 composite oxides with SiO2/TiO2 of 20/80 molar compositions were prepared by the sol-gel method, using tetraethylorthosilicate (TEOS) and titanium isopropoxide (TIP) as precursors. Ag-SiO2-TiO2 films coated on commercial glass substrates have successfully been synthesized using sol-gel method. The Ag-SiO2-TiO2 film with 0.5% Ag-added concentration and 20 mol% SiO2-mixture gives optimal results on crystalline structure, optical property, surface area, and photochromic property. Absorption near the wavelength of the incident light decreased gradually. The reversibility of the two-photon writing process in Ag-SiO2-TiO2 film is clearly seen.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.41-46
• /
• 2004

The formation of rust on metallic substrate is known to cause the damages and destructions of raw materials, which is one of the leading reasons of sturctural collapses and many kind of hazards in modern industry. Polymer gels with rust removing effects were compounded in this study by employing various kinds of acids like hydrochloric acid, phosphoric acid, gluconic acid, oxalic acid as the rust removing ingredients. TEA(Triethanolamine) as dispersant and hydrophilic chemical were used for effective gelation of acids. Also corrosion inhibitor was added to enable the coating effect and to improve rust removing effect on metallic surface. In order to investigate the rust properites on metallic substrate, artificial rusts were prepared in salt solution, using iron, copper, aluminium and brass as the base metals. The properties of gel compounds were checked by gelation, pH, viscosity, morphology property and rust removing test. Developed gel compounds in this study have a good rust removing property, showing a strong adhesion on horizontal and vertical metallic surface, and can be easily rinsed off by water.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.288-296
• /
• 2009

In this study, the silica-based hybrid material with high barrier property was prepared by incorporating ethylene-vinyl alcohol (EVOH) copolymer, which has been utilized as packaging materials due to its superior gas permeation resistance, during sol-gel process. In preparation of this EVOH/$SiO_2$ hybrid coating materials, the (3-glycidoxy-propyl)-trimethoxysilane (GPTMS) as a silane coupling agent was employed to promote interfacial adhesion between organic and inorganic phases. As confirmed from FT-IR analysis, the physical interaction between two phases was improved due to the increased hydrogen bonding, resulting in homogeneous microstructure with dispersion of nano-sized silica particles. However, depending on the range of content of added silane coupling agent (GPTMS), micro-phase separated microstructure in the hybrid could be observed due to insufficient interfacial attraction or possibility of polymerization reaction of epoxide ring in GPTMS. The oxygen barrier property of the mono-layer coated BOPP (biaxially oriented polypropylene) film was examined for the hybrids containing various GPTMS contents. Consequently, it is revealed that GPTMS should be used in an optimum level of content to produce the high barrier EVOH/$SiO_2$ hybrid material with an improved optical transparency and homogeneous phase morphology.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.107.1-107.1
• /
• 2007

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.46.2-46.2
• /
• 2000