• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.398-403
• /
• 2000

The design of multi-stage gear drives is a time-consuming process that includes additional design problems, which are not considered in the design of single-stage gear drives. In the previous research works, the authors have proposed a new algorithm to design multi-stage gear drives at the preliminary design phase. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. In the configuration design process, the positions of gears and shafts are determined by minimizing the geometrical volume (size) of a gearbox. However, various types of spatial constraints should be satisfied in practical design situation. To locate input and output shaft in specified positions is the typical example of such problems. In this paper, the authors show the formulations of spatial constraints applied to the design of four-stage gear drives. The design solution shows considerably good results, and the design system is confirmed to be readily applicable to practical design situation.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.45-54
• /
• 1984

Bending strength of an internal gear tooth is discussed as tooth form factor taking into account the actual stress magnitude. Stress analysis was carried out by the finite element method(FEM) for the calculation of tooth form factor of an internal gear. This paper also investigated the influences of number of teeth and addendum modification coefficient of the internal gear and the influences of number of teeth, addendum modification coefficient, pressure angle, radius of rounding of tooth tip, and bottom clearance coefficient of the pinion-shaped cutter on tooth form factor of internal gear. Generalizing the resultant data, a simple formula for the tooth form factor of an internal gear was derived for the calculation of tooth bending strength of an internal gear.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.187-191
• /
• 1990

그동안 실험을 통해 측정된 울산화력 BFP 진동 Data의 분석을 통하여 문제 가 되는 과도진동원에 대한 분석이 시도되었다. BFP의 이력과 그간의 측정 자료를 근거로 진동원과 진동에너지의 전달 경로를 가정하였고 각각의 진동 원에 대한 타당성 검토를 위하여 신호처리가 수행되었으며 그 결과로부터 BFP 과도진동 현상에 의해 야기되는 F 베어링 92.5 Hz의 진동에너지는 Voith Coupling의 기어에서 발생되었던 것으로 밝혀졌다. 문제의 해결을 위 해 치차를 대체시켰으며 진동값은 치차가 교환되기 전의 193.$\mu$m이 40.$\mu$m 이하로 줄 수 있었고 따라서 BFP는 안전운행 조건을 만족시키는 동급(Fair Operation)에 들게 됨을 볼 수 있다. BFP로부터 분리된 구동축 Gear는 육안상 크게 균열은 없어 보였으나 특정방향으로 일부 마모가 있어 보였으며 이는 유체와의 회전시 Unbalance에 의한 마모결과로 보여진다. 현 재 6-2 BFP에서 사용되었던 구동측 부품인 기어, Impellar는 치차마모등 비 파괴 정밀조사와 함께 Wet Balancing등의 측정이 진행되고 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.2
• /
• pp.89-105
• /
• 1991

A method to apply the approximation formulae[1] for tooth fillet and root stresses of a thin-rimmed rack to the calculation of stress state of thin-rimmed external and internal spur gears is introduced. The stress values by the method proposed in this paper have shown good agreement with those by the REM analysis and also by the stress measurement of strain survey investigation. By this method, reliable stress state at tooth fillet and root areas in the thin-rimmed external and internal spur gears can be easily calculated, and a practical design method for the bending strength of such thin-rimmed gears is established.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.808-812
• /
• 1996

Reduction gear with internal gear pair need functions such as compact size, high reduction ratios, high transmission efficiency, and low noise. Feasible design region of the internal gear pair with a small tooth difference is extremely limited because the internal gear pair is subject to interference in meshing and cutting. Single-objective optimal design can not simulataneously satisfy the manifold requirements of the internal gear pair and can not determine the economical specification of a pinion cutter. Multi-objective optimal design which include the specification of the pinion cutter in design variables is developed, considering the manufacturing error of an internalgear pair and the re-sharpening of the pinion cutter.

• Journal of the Korean Society of Safety
• /
• v.9 no.3
• /
• pp.28-33
• /
• 1994

It is very important to have exact informations on the properties and characteristics of the sintering material as a new material of machine elements. To study the sintering spur gear and the sintering specimen to be consisted of Fe-Cu-C, the constant stress amplitude fatigue test is performed by using an electrohydrolic survo-controlled pulsating tester. Consequently, the S-N curves are obtained and the fatigue strength is compared with flaw depth. Accordingly, this study presents the fatigue strength of sintering spur gears, the critical notch depth of sintering materials and the effects of flaw depth on the bending fatigue strength.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.625-626
• /
• 2009

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.749-756
• /
• 1998

기어에서 충격성 진동 및 소음은 치차의 이상과 연관이 있다. 따라서 충격 진동 및 소리는 기어의 이상 진단에 사용되어 질 수 있다. 또한 이들 충격파를 조기에 정확하게 탐지하여 기어의 이상을 진단하면 완전 파손을 방지할 수 있다. 그러나 주변 소음 및 노이즈 신호 때문에 객관적이 충격파의 탐지가 어렵기 때문에, 본 논문은 이러한 숨겨진 충격 신호를 능동 신호 처리 기법을 이용하여 조기에 찾아내고 이것을 시간-주파수 영역에서 해석하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.307-312
• /
• 1996

A torsional vibration analysis of a multi-stage reduction gear box connected to a gas turbine system is presented. For a free vibration analysis the Modified Hibner Branch Method, so called "Blank Matrix Method", and the .lambda.-Matrix Method are used in the modeling and the eigenvalue solution, respectively. Also, a short circuit forced analysis of the system is performed, utilizing the energy method modeling. It is shown that the results of the free vibration analysis have the same tendency as those of the short circuit analysis. analysis.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.257-262
• /
• 2001

As computer-related technologies have been developed, legacy design systems have not been appropriate for new computing environment. Therefore, it is necessary that most of them are either modified or newly developed. However, this requires quite much amount of cost and time. This paper presents a method of extending legacy design system without modification using XML and XSLT. In order to apply the developed method, a good example of legacy design systems, AGMA gear rating system has been extended so as to be suitable for the distributed computing environment. An XML document for AGMA gear rating process is defined. It is transformed to the form of the input document of AGMA gear rating system by XSLT processor according to the transformation rules defined in the AGMA gear rating XSLT document. After that, AGMA gear rating system reads this input document and generates an output document in the server. These operations are automatically executed by the external legacy system controller without user interactions. Using these operations, AGMA gear rating web service has been developed based on SOAP and WSDL to provide the functions of legacy AGMA gear rating system through the distributed network. Any system or user can implement AGMA gear rating process independently to the platform type, without making it for oneself, by simply referring the AGMA gear rating web service via Internet.