• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.254-255
• /
• 2005

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.968-973
• /
• 2013

In the transportation industry, especially in the shipbuilding process, 3D surface measurement of large-scale hull pieces is needed for fabrication and assembly. We suggest an efficient method for checking the shape of curved plates under the forming operation with short time by measuring 3D profiles along the multi lines of the target surface. For accurate profile reconstruction, 2D camera calibration and 3D calibration using gauge blocks were performed. The evaluation test shows that the measurement accuracy is within the boundary of tolerance required in the shipbuilding process.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.214-220
• /
• 2019

The calibration method of the initial value error obtained in the weight measurement through anchor bolt type strain gauge sensor is proposed. The strain gauge sensor is developed for preventing the overturning of forklift, which is the most frequent type of safety-accident in industry. It was confirmed that the initial value error is caused from the physical and mechanical error of anchor bolt, and the environmental problem. Since the elimination of these causes falls outside the realm of this research, we find out the calibrated values based on all the causes, and we adjust the initial values of analog-to-digital convertor (ADC) module consisted of strain gauge sensor block using the calibrated values. We use the linear interpolation method for our calibration. We confirm that four sensor modules have the different under 5% between the real weight and the measured value in the experiment applied with the calibration of initial values. The low correlation between the real weights and ADC values is also improved through the proposed calibration.

• The Korean Journal of Pain
• /
• v.14 no.2
• /
• pp.249-252
• /
• 2001

Total spinal anesthesia is a serious life threatening complication of spinal and epidural anesthesia. We report an accidental total spinal anesthesia developed during a thoracic epidural block in a practitioner's pain clinic. A 69-year-old female with post-herpetic neuralgia was treated by a thoracic epidural block. A thoracic tapping for the epidural block was performed in the right lateral position at a level between $T_{5-6}$, using a 23 gauge Tuohy needle. After the epidural space was identified, a mixed solution of 10 ml of 0.3% lidocaine and 20 mg of triamcinolone was injected into the epidural space. After removal of the syringe, fluid was dripping through the needle. The patient subsequently complained of dyspnea and dizziness, and she became unconscious. She was intubated immediately and cardiopulmonary resuscitation was performed because there was no pulse palpable. The patient recovered an hour after transfer to a general hospital and was discharged without any further complication 19 days later.

• The Korean Journal of Pain
• /
• v.8 no.2
• /
• pp.279-285
• /
• 1995

Extradural block is a form of treatment described as early as the beginning of the present centuries. It has since had positive criticism from a number of authors in different countries. Epidural injections of steroids with or without local anesthetic have become an occasional method of conservative treatment in sciatica & lumbago, especially in acute case. We assess the results of continuous epidural block with steroids and local anesthetics in sciatica & lumbago. From July 1994 to June 1995, we treated 46 case of lumbago and sciatica using continuous epidural block with steroids and local anesthetics. After placement of 17-Gauge Tuohy needle in the epidural space by the technique of loss of resistance, 0.25% bupivacaine 5 cc and triamcinolone 40 mg was administered and then epidural catheter was placed and connected to multiday infusor(Paragon) using 1% lidocaine with continuous infusion rate of 1 ml/hour. Usually, the catheter was removed after 1~2 weeks and then treated with the physical therapy. At the time of patient's discharge, 69.5% of all cases showed excellent or good results. Of particular note, 26 of the 46 cases were followed up by telephone. At present, in using Of particular note, 26 of the 46 cases were followed up by telephone. At present, in using continuous epidural block procedure, a relief in symptoms showed in 65.5% of these 26 cases. Continuous epidural block provides shortening of the recovery time from pain, avoidance of long period bed rest and early physical therapy and exercise. Therefore, continuous epidural block is simple and safe in the treatment of lumbago and sciatica, especially in acute phase.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.17-24
• /
• 2000

1960년 Jawan 등이 1.15㎛ 파장을 포함한 6개의 발진파장을 갖는 He-Ne 레이저의 연속 발진을 성공시킨 이후 레이저는 단색성이나 빛의 진직성을 이용하는 계측에서 특히 정밀길이측정에서 매우 중요하게 사용되고 있다. He-Ne 레이저의 발진선폭은 80㎑로써 길이표준기로 사용되었던 Kr-86 스펙트럼선의 선폭(400㎒)의 5,000 분의 1에 해당되는 매우 좁은 선폭을 갖고 있다.(중략)

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.4
• /
• pp.746-754
• /
• 1996

The purpose of this study was to evaluate the fracture strength of porcelain laminate veneer with various lingual extention length when incisal restoring. Sixty recently extracted, intact maxillary incisors were used and stored in a physiologic saline solution from the time of extraction. Seating form was preparation at the labial surface of each tooth with a water-cooled round diamond bur. Standard block was formed with 32 gauge and 24 gauge wax at tooth labial and lingual surface. Lingual extention length differed according to each group. (group I : 0.5mm, group II : 1 mm, group III : 2mm, group IV : 0mm) All tooth specimens were impressioned with examix(GC Inc., Japan). Refractory cast were maked with refractory die material(Ceramco Inc., U.S.A.) Laminate porcelain (Ceramco II Veneer porcelain, Ceramco Inc., U.S.A.) was condensed in refractory die cast and baked according to the manufacturer's recommendations. Each surface was contoured with low speed diamond bur according to guide block. All porcelain specimens were sandblasted and ultrasonically cleaned in distlled water for 3 minutes. Then, all porcelain specimen were etched with 8% hydrofluoric acid for 5 minutes. Sixty specimens were bonded with composite resin cement(Choice Porcelain Veneer System, Bisco Inc., U.S.A.) according to manufacture's directions. The fracture loads of the specimen were measured by Instron universal testing machine. The mean values of fracture loads for the groups were statistically compared by Duncan's multiful range test. The result were as follows : Mean fracture strengths of each group were 86.95Mpa in no lingual extention group, 44.98Mpa in 0.5mm lingual extention group, 27.47Mpa in 1mm lingual extention group, 19.61Mpa in 2mm lingual extention group. There was a statistically significant difference between all group(p<0.01).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.281-285
• /
• 1996

In this paper, I made visual inspection system using Vision Board and it is consist of an illuminator (a fluorescent lamp), image input device(CCD(Charge)Coupled Device) camera), image processing system(Vision Board(FARAMVB-02), image output device(videomonitor, printer), a measuring instrument(TELMN1000). Length measurement by visual inspection system is used 100mm gauge block instead of calculating distance between camera and object, it measured horizontal and vertical length factor from 400mm to 650mm by increasing 50mm. In this place, measured horizontal and vertical length factor made use of length measurement of a injection. A measuring instrument used to compare a measured length of a injection visual inspection system with it. In conclusion, length measurement of a injection compared a measuring instrument withvisual inspecion system using length factor of 100mm guage block. Maximum error of length compared two devices a measuring instrument with visual inspection system is 0.55mm. And operation program is made up Borland C++ 3.1. By changing, it is applied to various uses.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.4
• /
• pp.315-321
• /
• 2022

Although rare, hypodermic needle fractures can occur in the maxillofacial region. In cases of fracture, urgent intervention is required to prevent further complications. We present the case of a 37-year-old female patient with a fractured needle in the left sublingual fossa during a lingual nerve block 6 months before referral. The fragment of a 30-gauge needle was located using cone-beam computed tomography and retrieved under local anesthesia with blunt dissection. The patient recovered uneventfully, except for predictable postoperative inflammatory complications, which resolved within 2 weeks. Precautions should be implemented to prevent needle fractures, which are usually preventable. However, if the retrieval is unsuccessful, the patient should be referred to a well-equipped surgical unit without delay.

• The Korean Journal of Pain
• /
• v.25 no.3
• /
• pp.168-172
• /
• 2012

Background: The aim of the study was to investigate the feasibility of fluoroscopy-guided anterior approach for suprascapular nerve block (SSNB). Methods: Twenty patients with chronic shoulder pain were included in the study. All of the nerve blocks were performed with patients in a supine position. Fluoroscopy was tilted medially to obtain the best view of the scapular notch (medial angle) and caudally to put the base of coracoid process and scapular spine on same line (caudal angle). SSNB was performed by introducing a 100-mm, 21-gauge needle to the scapular notch with tunnel view technique. Following negative aspiration, 1.0 ml of contrast was injected to confirm the scapular notch, and 1 % mepivacaine 2 ml was slowly injected. The success of SSNB was assessed by numerical rating scale (NRS) before and after the block. Results: The average NRS was decreased from $4.8{\pm}0.6$ to $0.6{\pm}0.5$ after the procedure (P < 0.05). The best view of the scapular notch was obtained in a medial angle of $15.1{\pm}2.2$ ($11-19^{\circ}$) and a caudal angle of $15.4{\pm}1.7^{\circ}$ ($12-18^{\circ}$). The average distance from the skin to the scapular notch was $5.8{\pm}0.6$ cm. None of the complications such as pneumothorax, intravascular injection, and hematoma formation was found except one case of partial brachial plexus block. Conclusions: SSNB by fluoroscopy-guided anterior approach is a feasible technique. The advantage of using a fluoroscopy resulted in an effective block with a small dose of local anesthetics by an accurate placement of a tip of needle in the scapular notch while avoiding pneumothorax.