• Journal of Korea Water Resources Association
• /
• v.55 no.5
• /
• pp.321-331
• /
• 2022

In this study, we tried to present a method for calculating the amount of regression using a watershed modeling method that can simulate the hydrological mechanism of water balance analysis and agricultural water based on watershed unit. Using the soil water assessment tool (SWAT), a watershed water balance analysis was conducted considering the simulation of paddy fields for the Manbongcheon Standard Basin (97.34 km²), which is a representative agricultural area of the Yeongsan river basin. Before evaluating return flow, the SWAT was calibrated and validated using the daily streamflow observation data at Naju streamflow gauge station (NJ). The coefficient of determination (R²), Nash-Sutcliffe Efficiency (NSE), Root-Mean-Square Error (RMSE) of NJ were 0.73, 0.70, 0.64 mm/day. Based on the calibration results for three years (2015-2017), the quick return flow and the return rate compared to the water supply amount for the irrigation period (April 1 to September 30) were calculated, and the average return flow rate was 53.4%. The proposed method of this study may be used as foundation data to optimal agricultural water supply plan for rational watershed management.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1053-1064
• /
• 2022

The Thiessen method, which is the current area average precipitation method, has serious structural limitations in accurately calculating the average precipitation in the watershed. In addition to the observation accuracy of the precipitation meter, errors may occur in the area average precipitation calculation depending on the arrangement of the precipitation meter and the direction of the heavy rain. When the watershed is small and the station density is sparse, in both simulation and observation history, the Thiessen method showed a peculiar tendency that the average precipitation in the watershed continues to increase and decrease rapidly for 10 minutes before and after the peak. And the average precipitation in the Thiessen basin was different from the rainfall radar at the peak time. In the case where the watershed is small but the station density is relatively high, overall, the Thiessen method did not show a trend of sawtooth-shaped over-peak, and the time-dependent fluctuations were similar. However, there was a continuous time lag of about 10 minutes between the rainfall radar observations and the ground precipitation meter observations and the average precipitation in the basin. As a result of examining the ground correction effect of the rainfall radar watershed average precipitation, the correlation between the area average precipitation after correction is rather low compared to the area average precipitation before correction, indicating that the correction effect of the current rainfall radar ground correction algorithm is not high.

• Korean journal of aerospace and environmental medicine
• /
• v.31 no.1
• /
• pp.24-30
• /
• 2021

Purpose: The purpose of this study is to consider ways to strengthen it through comparison and curriculum while recognizing the importance of global competencies in liberal arts education in universities. Methods: In order to explore ways to reinforce the sub-competence of global competencies, this study was conducted at a four-year university in Chungcheong-do for one year in 2019, such as 'Global Culture Talk', 'Global Travel', 'Global Nanta', and 'Making Global Friends'. Cases of comparison and application of educational programs were analyzed. The program was attended by the Department of Business Administration, Department of Aviation Service, Department of Design, Department of Manga Animation, Department of Broadcasting and Film, and foreign exchange students. The competency-centered curriculum not only has clear educational goals, but is also very advantageous in establishing a feedback system by measuring its performance. This study will assess the effectiveness of the education plan by diagnosing the change in competencies before and after the comparison and curriculum is operated. Results: The overall global competency has increased by 0.2 points compared to 2017. By subsector, it was found that the flexibility increased by 1.4 points. In the field of cross-cultural understanding, it rose 0.6 points, and in the field of global understanding, it rose 2.2 points, showing the largest increase in the sub-fields. Nevertheless, the field of global interest remains at a low level. This is considerably low compared to flexibility and ability to understand other cultures, and it is expected that measures for improvement should be continuously sought. Since the understanding of other cultures has already exceeded 60 points, it is expected that the global competency of the university will be strengthened if the level is consistently maintained and the emphasis is placed on enhancing flexibility and improving global understanding. Conclusion: The importance of strengthening global capabilities is steadily rising. Universities are also reorganizing the curriculum by analyzing the needs and satisfaction of education consumers to respond to this. The programs operated and analyzed in this study were also made as part of this effort. However, since there are various factors that affect global competency, it cannot be but admitted that it is not easy to gauge the change in competency with only a few programs and short-term efforts. However, if the efforts pursued by this study are accumulated and supplemented through feedback from a long-term perspective, it can be expected that there are not a lot of contributions to strengthening global competencies in liberal arts education.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.913-922
• /
• 2022

The purpose of this research is to propose the measurement of improving DEM by using the water surface range of SAR image analysis for river corridors and to suggest the construction of satellite-based 3D river spatial information of inaccessible regions such as North Korea. For this research, it has been progressed from the accessible area, watershed of Namgang river, the branch of Nakdonggang river. The satellite image was collected from SAR satellite image data for a year in 2021 which was provided by ESA from Sentinel-1A/B data and extracted from the seasonal water surface area. Ground gauge water level was collected from hourly intervals data by WAMIS. The DEM was improved by analysis of the river altitude of water surface area change by the combination of the ground water level of minimum to maximum water surface area data extracted from SAR image analysis. After the improvement of DEM, the altitude of the river varied that it is defined to comprise more natural form of river DEM than the existing DEM. The correction validation of improvement DEM was necessary in field survey elevation data; however, the correction validation was not progressed due to the absence of the data. Although, the purpose of this research is to provide the improvement of DEM by using the analyzed water surface by existing DEM data and SAR image analysis. After the progression of additional correction validation research, we would plan to examine the application in other places and to progress the additional methodological research to apply in inaccessible and unmeasured area including the North Korea.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.366-375
• /
• 2022

The monitoring of electricity consumption using Internet of Things (IoT) technology is attracting attention as a technology to reduce operation costs of smart farms. In this study, we propose a method to apply a real-time electrical consumption monitoring system (the e-Gauge system) and utilization of the collected data real-time while a melon-producing smart farm is in operation. For this purpose, the electrical consumption data for the individual smart-farm facilities such as boilers, nutrient distribution systems, automatic controllers, circulation fans, boiler controllers, and other IoT-related utilities were collected during three months of melon cultivation period. By using the monitoring results, the electrical energy consumption pattern was analyzed as an example, and necessary considerations needed to optimally utilize the measurement data were suggested. This paper will be useful in lowering the technological implementation barriers for new researchers to build a electrical consumption monitoring system and reducing trial and errors in the usage of the generated data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.311-322
• /
• 2022

This study performed 4-point flexural tests of reinforced concrete to which was attached a distributed optical fiber sheet and carbon fiber reinforced polymer (CFRP) sheets in order to assess the effect of the CFRP sheets and the applicability of a BOTDR sensor simultaneously. To evaluate the reinforcing effect, various degrees of CFRP sheet attachment were manufactured, and to evaluate the sensing ability, strains obtained from a BOTDR sensor were compared with strains measured from electric resistance strain gauges that were attached to the concrete surface. From the results, the reinforcing effects were evidently different according to the attachment type of the CFRP sheets, and it was confirmed that the main influencing factor on the reinforcing effect was the type of attachment rather than the attachment area. The reinforced concrete structural behavior was visualized with strains measured from the BOTDR sensor as load increased, and it was identified that load was concentrated in the CFRP reinforced area. Strains from the BOTDR sensor were similar to those from the electric resistance strain gauge; thereby a BOTDR sensor can be effective in the analysis of structural behaviorsof massive infrastructure. Finally, the strain from a BOTDR sensor was high where CFRP sheet fall-off occurs, and it would therefore be efficient to track local damage locations of CFRP sheets by utilizing a BOTDR sensor.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.222-232
• /
• 2022

In this study we investigated the characteristics of long-term tidal constituents based on 30 tidal gauge data along the coasts of Korea and its the effects on total water level (TWL) forecasts. The results show that the solar annual (Sa) and semiannual (Ssa) tides were dominant among long-term tidal constituents, and they are relatively large in western coast of Korea peninsula. To investigate the effect of long-term tidal constituents on TWL forecasts, we produced predicted tides in 2021 with and without long-term tidal constituents. The TWL forecasts with and without long-term tidal constituents are then calculated by adding surge forecasts into predicted tides. Comparing with the TWL without long-term tidal constituents, the results with long-term tidal constituents reveals small bias in summer and relatively large negative bias in winter. It is concluded that the large error found in winter generally caused by double-counting of meteorological factors in predicted tides and surge forecasts. The predicted surge for 2021 based on the harmonic analysis shows seasonality, and it reduces the large negative bias shown in winter when it subtracted from the TWL forecasts with long-term tidal constituents.

• Smart Media Journal
• /
• v.11 no.11
• /
• pp.49-62
• /
• 2022

Recently, with the development of Smart City Solutions such as Big data, AI, IoT, Autonomous driving, and Digital twins around the world, the proliferation of various smart devices and social media, and the record of the deeds that people have left everywhere, the construction of Smart Cities using the "Big Data" environment in which so much information and data is produced that it is impossible to gauge the scale is actively underway. The Purpose of this study is to construct an objective and systematic analysis Model based on Big Data to improve the transportation convenience of citizens and formulate efficient policies in Urban Information and Public Transportation accessibility in sustainable Smart Cities following the 4th Industrial Revolution. It is also to derive the methodology of developing a Big Data-Based public transport accessibility and policy management Platform using a sustainable Urban Public DB and a Private DB. To this end, Detailed Living Areas made a division and the accessibility of basic living amenities of Gwangju Metropolitan City, and the Public Transportation system based on Big Data were analyzed. As a result, it was Proposed to construct a Big Data-based Urban Information and Public Transportation accessibility Platform, such as 1) Using Big Data for public transportation network evaluation, 2) Supporting Transportation means/service decision-making based on Big Data, 3) Providing urban traffic network monitoring services, and 4) Analyzing parking demand sources and providing improvement measures.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.11-19
• /
• 2006

For the last decade, the hi-directional testing method has been advantageous over the conventional pile load testing method in many aspects. However, because the hi-directional test uses a loading mechanism entirely different from that of the conventional pile load testing method, many investigators and practicing engineers have been concerned that the hi-directional test would give inaccurate results, especially about the pile head settlement behavior. Therefore, a hi-directional load test and the conventional top-down load test were executed on 1.5 m diameter cast-in-situ concrete piles at the same time and site. Strain gauges were placed on the piles. The two tests gave similar load transfer curves at various depth of piles. However, the top-down equivalent curve constructed from the hi-directional load test results predicted the pile head settlement under the pile design load to be about one half of that predicted by the conventional top-down load test. To improve the prediction accuracy of the top-down equivalent curve, a simple method that accounts for the pile compression is proposed. It was also shown that the strain gauge measurement data from the hi-directional load test could reproduce almost the same top-down curve.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.681-692
• /
• 2017

In recent years, large-scale construction projects such as road pavement construction and new city construction have been carried out nationwide with by the expansion of social overhead facilities and base on the economic development planning, resulting in a rapid increase in artificial slope damage. The existing vegetation-based re-installation method of the slope surface greening method reveals various problems such as lack of bonding force, drying, and lack of organic matter. In this study, research was carried out using vegetation-based material and environmentally friendly soil additives, were are used in combination with natural humus, Bark compost, coco peat, and vermiculite. Uniaxial compressive strength was measured according to the mixing ratio of soil additives and the strength was analyzed. Experiments were carried out on the characteristics of the soil material to gauge the slope protection properties by using the soil compaction test method wherein the soil and the soil additive materials are mixed in relation to the soil height, the number of compaction, the compaction method (layer) and the curing condition. As a result of the experiment, excellent strength performance was demonstrated in soil additives using gypsum cement, and it satisfied vegetation growth standards by using performance enhancer and pH regulator. It was confirmed that the strength increases with the mixing of soil and soil additive, and the stability of slope protection can be improved.