• 산업공학
• /
• 제20권1호
• /
• pp.69-78
• /
• 2007

We conduct an empirical study on RFID application to a real container terminal gate. The objective of this study is three-fold. The first is to design a new gate management process that applies RFID technology. For this purpose, we analyze current gate management process to find opportunities for improvement. The second is to verify the 433 and 900 MHz RFID technology in terms of the recognition rate of information contained in RFID tag under various conditions such as the speed of vehicle, the position of RFID tag and the tilt of RFID reader. We perform some experimental tests for this verification. Finally, we try to find suitable conditions for the speed of vehicle, the position of RFID tag and the tilt of RFID tag reader based on results of the experimental tests. Those findings are obtained with some ANOVA tests. Additionally, we summarize anticipated issues when applying RFID technology to the gate management process and possible solutions for the issues.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2006년도 추계학술대회
• /
• pp.532-539
• /
• 2006

We conduct an empirical study on RFID application to a real container terminal gate. The objective of this study is three-fold. The first is to design a new gate management process that applies RFID technology. For this purpose, we analyze current gate management process to find opportunities for improvement. The second is to verify the 433 and 900 Mhz RFID technology in terms of the recognition rate of information contained in RFID tag under various conditions such as the speed of vehicle, the position of RFID tag and the tilt of RFID reader. We perform some experimental tests for this verification. Finally, we try to find suitable conditions for the speed of vehicle, the position of RFID tag and the tilt of RFID tag reader based on results of the experimental tests. Those findings are obtained with some ANOVA tests. Additionally, we summarize anticipated issues when applying RFID technology to the gate management process and possible solutions for the issues.

• 한국지능시스템학회논문지
• /
• 제20권1호
• /
• pp.109-115
• /
• 2010

수문 제어의 주요기술은 두 개의 실린더가 하나의 수문을 동시에 10[m] 이상 들어 올리는 행정 동안 정밀하게 제어되도록 하여 동기 작동 시키는 것이다. 실린더에 공급되는 유량 및 압력이 일정하지 않으며, 실린더 피스톤의 비선형적인 마찰력에 의해 두 개의 실린더 위치 오차가 발생하게 되면 수문의 개폐 시 비틀림 현상을 야기 시켜서 수문의 마모를 발생시키고, 수문의 개폐작동 불능 현상을 만들기도 한다. 배수갑문용 유압실린더의 위치 및 동기 제어기를 설계하기 위하여 fuzzy PI 제어기를 이용하여 두 개의 실린더의 위치 및 동기제어기를 설계하고, 시뮬레이션을 통해 효용성을 제시한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1297-1298
• /
• 2010

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.363-370
• /
• 2003

Shrinkage of injection molded parts is different form operational conditions of injection molding such as injection temperature, injection pressure and mold temperature, and mold design such as gate size. It is also various for different resins which have crystalline structure or not. In this study part shrinkage was investigated for various operational condition and resins; PBT for crystalline polymer, and PC and PMMA for amorphous polymer was used in experiment. Crystalline polymer shows higher part shrinkage by about three times than amorphous polymer. Part shrinkage increased as injection temperature and mold temperature increased and injection pressure decreased. Part shrinkage decreased as gate size increased since the pressure delivery is mush easier for large gate size. Part shrinkage according to the gate location was that the position in the part with close to the gate showed large shrinkage and this phenomenon might be occurred by residual stress.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권1호
• /
• pp.18-26
• /
• 2004

Back-gated silicon-on-insulator MOSFET -a threshold-voltage adjustable device-employs a constant back-gate potential to terminate source-drain electric fields and to provide carrier confinement in the channel. This suppresses shortchannel effects of nano-scale and of high drain biases, while allowing a means to threshold voltage control. We report here a theoretical analysis of this geometry to identify its natural length scales, and correlate the theoretical results with experimental device measurements. We also analyze experimental electrical characteristics for misaligned back-gate geometries to evaluate the influence on transport behavior from the device electrostatics due to the structure and position of the back-gate. The backgate structure also operates as a floating-gate nonvolatile memory (NVRAM) when the back-gate is floating. We summarize experimental and theoretical results that show the nano-scale scaling advantages of this structure over the traditional front floating-gate NVRAM.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.159-165
• /
• 2004

The shrinkages of injection molded parts are different in molding operational conditions and mold design. It also differs from resins. The shrinkages of injection molded parts for PBT (polybutylene terephthalate), PC (polycarbonate),and glass reinforced PBT and PC have been studied for various operational conditions of injection molding. The part shrinkage of crystalline polymer, PBT was higher than that of amorphous polymer, PC by about two times. The part shrinkages of both polymers decreased as glass fiber content increases. Higher Injection temperature and lower injection pressure resulted in a higher shrinkage in both PBT and PC resins. As mold temperature increases the part shrinkage of PC decreased. However, the part shrinkage of PBT increased as mold temperature increases. The part shrinkage of both PBT and PC resins decreased as gate size increases since the pressure delivery is mush easier for a larger gate size. The part shrinkage of flow direction was less than that of the perpendicular direction to the flow for both pure and glass fiber reinforced resins. The part shrinkage at the position close to the gate was less than that of the position far from the gate.

• 소성∙가공
• /
• 제13권6호
• /
• pp.515-521
• /
• 2004

The shrinkages of injection molded parts are different in molding operational conditions and mold design. It also differs from resins. The shrinkages of injection molded parts fur PBT (polybutylene terephthalate), PC (polycarbonate), and glass reinforced PBT and PC have been studied for various operational conditions of injection molding. The part shrinkage of crystalline polymer, PBT was higher than that of amorphous polymer, PC by about two times. The part shrinkages of both polymers decreased as glass fiber content increases. Higher injection temperature and lower injection pressure resulted in a higher shrinkage in both PBT and PC resins. As mold temperature increases the part shrinkage of PC decreased. However, the part shrinkage of PBT increased as mold temperature increases. The part shrinkages of PBT and PC resins decreased as gate size increases since the pressure delivery is mush easier for a larger gate size. The part shrinkage of flow direction was less than that of the perpendicular direction to the flow for both pure and glass fiber reinforced resins. The part shrinkage at the position close to the gate was less than that of the position far from the gate.

• Elastomers and Composites
• /
• 제38권4호
• /
• pp.295-302
• /
• 2003

사출성형에서 성형품의 수축현상은 사출온도, 사출압력, 금형온도와 같은 성형공정에 따라 다르게 나타나며 게이트의 크기 등과 같은 금형설계에 따라서도 다르게 나타난다. 또한 수지의 결정화 유무에 따라 다르게 나타나고 있다. 본 연구에서는 여러가지 공정변수와 수지 특성에 따른 성형 수축률을 결정성수지인 poly(butylene terephthalate) (PBT)와 비결정성 수지인 polycarbonate (PC), poly(methyl methacrylate) (PMMA)를 사용하여 연구하였다. 결정성 수지가 비결정성 수지에 비해 약 3배 정도의 큰 수축률을 보였다. 사출 성형품의 성형 수축은 사출온도와 금형온도가 높을수록 그리고 사출압력이 작을수록 수축률은 커지는 경향을 보였다. 게이트의 크기가 커질수록 캐비티내의 압력전달이 원활하여 성형수축률은 작아 졌다. 또한 수지의 흐름방향과 흐름직각방향의 수축률 실험에서는 흐름방향의 수축이 더 작은 경향을 보였다. 게이트와의 거리에 따른 성형수축률은 게이트에서 가까운쪽의 수축이 먼쪽보다 더 큰 수축을 보였는데 이 현상은 잔류응력의 차이로 인하여 나타난 현상으로 해석된다.

• 한국전산구조공학회논문집
• /
• 제14권3호
• /
• pp.267-276
• /
• 2001

이 논문은 회전식 수문(radial gate)의 구조해석에 근거하여 지지점 위치에 따른 모멘트 분배를 최적화하는 것에 관심을 두고 있다. 회전식 수문(radial gate)의 경제적인 관점에서의 중요성에도 불구하고 이의 지지점 위치에 따른 최적설계에 관한 자료를 찾기 어려운 실정이다. 그래서 본 연구에서는 주판(skin plate)의 곡률 반경, 수심, 동압 등의 주어진 자료를 이요약하여 지지점(gate arm)의 수가 2개인 경우와 3개인 경우에 대하여 곡선형태의 주판(skin plate)에서 지지점 (arm)의 최적 위치를 얻어서 설계자료에 의한 것들과 비교한다. 그 결과 최적 설계에 의한 회전식 수문 (radial gate)의 치수가 설계자료에 의한 것에 비해 현저히 감소되는 것을 알 수 있다.