• 제목/요약/키워드: Gaseous loss

검색결과 47건 처리시간 0.038초

CNG 충전소 배관시스템용 고압 차단밸브에 대한 내부 유동해석에 관한 연구 (A Study on the Internal Flow Analysis of High-pressure Shut-off Valve for CNG Charging Station Piping System)

  • 진도훈
    • 한국산업융합학회 논문집
    • /
    • 제24권6_2호
    • /
    • pp.773-779
    • /
    • 2021
  • CNG, which has recently been attracting attention as an alternative fuel in the transportation field to reduce emissions caused by global warming, is natural gas with abundant reserves and mainly composed of methane. Being in a gaseous state, natural gas requires the compression and liquefaction processes for transportation. Until now, general shut-off valves for liquid and gas piping have been developed in Korea, but there are few studies on shut-off valves for high pressures of about 200 bar. Currently, research on the flow analysis of valves is being actively conducted around the world. However, there are relatively many studies on large valves such as low-pressure valves or shipbuilding and marine, and the safety factor through structural analysis to check the structural integrity of the valve is checked at the design stage. Since it is necessary to have a fast response speed while minimizing pressure and speed loss due to flow change, basic research was conducted on the flow analysis of the valve to secure design data, and the numerical analysis was performed on high-pressure automatic shut-off valves applied to CNG refueling stations. After securing the basic valve shape through reverse engineering for advanced products, we compared the valve flow coefficient Cv coefficient with advanced products. As a result, it was found that the reverse engineering model was at the level of about 60%. However, we compared the Cv coefficient by modifying the reverse engineering model, and the result showed that it was improved to about 96%.

극미량 휘발성유기화합물질의 기체상 표준시료 조제와 열탈착분석방식에 기초한 분석안정도의 평가 (Evaluation of experimental reliability for trace-quantity of gaseous VOC working standards based on thermal desorption analysis)

  • 박신영;김기현
    • 분석과학
    • /
    • 제19권6호
    • /
    • pp.553-558
    • /
    • 2006
  • 본 연구에서는 Tedlar bag을 사용하여 조제한 작업용 기체상 표준시료를 열탈착과 GC/FID를 조합한 시스템으로 분석할 때, 발생 가능한 오차를 평가하고자 하였다. 이를 위해, 여러 가지 VOC성분(Benzene, Toluene, p-Xylene, Styrene)을 함유하는 표준시료를 4 가지 초기농도대(4~40 ppb)에서 조제하였다. 그리고 이들 작업용 시료를 이용하여, 각각의 검량결과를 도출하고 비교분석을 실시 하였다. 본 실험에서 설정한 4~40 ppb 농도대의 검량결과를 비교하기 위해, 공기분배/저온농축/열탈착 전용기(Air server/thermal desorber (AS/TD))와 조합한 GC/FID 시스템을 사용하였다. 본 연구의 결과, 표준시료의 조제방식이나 그와 연관된 초기농도의 차이가 검량 특성에 영향을 미친다고 하기는 어렵다는 결론을 내릴 수 있었다. 그러나 테들러백을 사용하는 경우, 여타 성분들에 비해 Styrene성분에서 감도가 떨어지는 경향이 크게 나타나는 점을 확인할 수 있었다.

해수 염기 침투방지를 위한 성능개선 형 물배출 앵커 및 트랩볼트 개발에 관한 연구 (Developing an improved water discharge anchor & trap bolt to prevent basic salt penetration to harbor structures)

  • 옥종호;문상덕;이화선;신경수
    • 한국산학기술학회논문지
    • /
    • 제19권4호
    • /
    • pp.674-682
    • /
    • 2018
  • 노후된 철근콘크리트 항만 구조물을 보수보강하기 위한 기존의 공법 대부분은 염기침투와 균열발생을 막기 위한 목적으로 개발되었으며 슬래브나 보 하부를 섬유복합체나 섬유복합체 패널로 벽지 바르듯 빈틈없이 접착시키는 공정으로 이루어져 있다. 하지만 이런 공법들은 섬유제품의 밀폐성 때문에 항만구조물 상부에서 유입되는 빗물 등의 수분을 외부로 배출시키지 못한다. 배출되지 않은 물은 보수보강 부위를 물통역할을 하게 되어 슬래브나 보의 피복콘크리트 전체를 탈락시키는 문제를 발생케 한다. 이에 본 연구진은 선행연구에서 콘크리트 구조물 내부로 유입된 수분을 배출하는 물배출 앵커 및 트랩볼트를 개발하였다. 하지만 앵커볼트의 매입부분의 수분은 배출되지 않아 잔류수분 문제가 발생하였다. 본 연구에서는 이런 잔류수분 문제를 해결하기 위해 기 개발된 물배출 앵커 및 트랩볼트 측면에 홀을 추가로 천공하는 여러 대안을 제시하였다. 또한 보수보강 현장에서 물배출 앵커를 적용할 경우 앵커의 설계하중 적용을 위해 인장강도시험, 인발강도시험을 수행하였고, 배수성능시험을 통해 최적의 성능개선 형 물배출 앵커 및 트랩볼트를 개발하였다.

고품질 수출용 파프리카 생산을 위한 이산화염소 가스 훈증 처리 (Gaseous Chlorine Dioxide Treatment to Produce High Quality Paprika for Export)

  • 강지훈;박신민;김현규;손현정;송경주;조미애;김종락;이정용;송경빈
    • 한국식품영양과학회지
    • /
    • 제44권7호
    • /
    • pp.1072-1078
    • /
    • 2015
  • 고품질 수출용 파프리카 생산을 위한 파프리카의 미생물학적 안전성을 확보하고 품질 유지를 위해 75 ppmv 이산화염소 가스 훈증 처리 후 $8{\pm}1^{\circ}C$에서 30일 동안 저장하면서 미생물 수 및 품질 변화를 측정하였다. 이산화염소 가스 훈증 처리 후 총 호기성 세균과 효모 및 곰팡이 수는 대조구와 비교하여 각각 1.62, 1.45 log CFU/g의 미생물 수 감소를 보였으며, 이러한 효과는 저장 30일 동안 지속되었다. 파프리카의 중량감소율은 저장 중 대조구와 처리구 모두 증가하는 경향을 나타냈으나 저장 30일 후 처리구가 대조구보다 1.08% 더 낮게 유지되었다. 저장 중 당도, 총 페놀 함량, 비타민 C 함량 및 경도는 이산화염소 가스 처리 유무와 상관없이 차이를 보이지 않았다. 당도와 총 페놀 함량은 저장 기간동안 큰 변화를 보이지 않았으나 비타민 C 함량과 경도는 저장 중 감소하는 경향을 나타내었다. 또한 이산화염소 가스 훈증 처리는 파프리카의 Hunter 색도 값에 부정적인 영향을 미치지 않았고, 관능평가에 있어서도 외관적 상태, 신선도, 종합적 기호도 측면에서 대조구보다 높은 점수를 나타냈다. 따라서 본 연구 결과 수확 후 파프리카에 75 ppmv 이산화염소 가스 훈증 처리는 저장 중 파프리카의 품질 변화를 최소화하면서 미생물학적 안전성을 확보할 수 있는 효과적인 수확 후 기술이라고 판단된다.

T-DNA 삽입에 의한 Formaldehyde-Responsive Protein1 기능파괴 돌연변이체의 특성연구 (Characterization of T-DNA Insertional Mutant of Formaldehyde-Responsive Protein1)

  • 서재현;우수영;김욱;권미
    • 한국산림과학회지
    • /
    • 제99권4호
    • /
    • pp.501-507
    • /
    • 2010
  • Formaldehyde responsive protein1(FRP1)은 175개의 아미노산으로 이루어진 universal stress protein(USP) family이며 대표적인 대기오염물질인 포름알데히드에 반응하는 단백질로 보고된 바 있다. 하지만 FRP1의 기능에 관해서는 전혀 밝혀진 바가 없다. 본 연구에서는 FRP1의 대기오염관련 기능연구를 위하여 FRP1 유전자에 T-DNA가 삽입된 돌연변이체를 분리하여 휘발성 유기화합물에 대한 반응성 및 세포활성변화 등을 분석하였다. 총 4개의 T-DNA 삽입 돌연변이 개체를 분석한 결과 3'UTR에 pROK2 vector가 삽입된 frp1-4 라인을 분리하였으며, frp1-4에서의 FRP1 유전자의 발현을 전사수준에서 분석한 결과 분리한 frp1-4은 FRP1 기능파괴 돌연변이체임을 알 수 있었다. FRP1의 전사가 억제됨에 따라 frp1-4($29.1{\pm}2.55$ cm)은 대조구($33.75{\pm}1.55$ cm)에 비해 키가 약간 작고 rosette leaves의 크기가 줄어드는 등 전체적으로 생장과 발달이 저해되는 것을 관찰할 수 있었다. 대조구와 frp1-4의 휘발성 유기화합물에 대한 반응성 및 세포활성 변화를 분석한 결과, 대조구는 포름알데히드 처리에 의한 엽록소 함량 저하가 7.5% 임에 반해 frp1-4은 35%에 이르러 포름알데히드에 의한 엽록소의 파괴현상이 FRP1의 기능파괴체에서 더 심각하게 발생하는 것을 확인하였다. 또한 대조구에 비해 frp1-4에서 포름알데히드 처리에 의한 세포활성의 감소가 대조구에 비해 더 현저하게 나타나는 것을 세포수준에서 관찰할 수 있었다. 그러므로 FRP1은 식물의 발달과 생장에 영향을 끼칠 뿐만 아니라 대기오염물질에 대한 스트레스 저항성에도 관여하는 단백질임을 알 수 있었다.

Current status of Atomic and Molecular Data for Low-Temperature Plasmas

  • Yoon, Jung-Sik;Song, Mi-Young;Kwon, Deuk-Chul
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.64-64
    • /
    • 2015
  • Control of plasma processing methodologies can only occur by obtaining a thorough understanding of the physical and chemical properties of plasmas. However, all plasma processes are currently used in the industry with an incomplete understanding of the coupled chemical and physical properties of the plasma involved. Thus, they are often 'non-predictive' and hence it is not possible to alter the manufacturing process without the risk of considerable product loss. Only a more comprehensive understanding of such processes will allow models of such plasmas to be constructed that in turn can be used to design the next generation of plasma reactors. Developing such models and gaining a detailed understanding of the physical and chemical mechanisms within plasma systems is intricately linked to our knowledge of the key interactions within the plasma and thus the status of the database for characterizing electron, ion and photon interactions with those atomic and molecular species within the plasma and knowledge of both the cross-sections and reaction rates for such collisions, both in the gaseous phase and on the surfaces of the plasma reactor. The compilation of databases required for understanding most plasmas remains inadequate. The spectroscopic database required for monitoring both technological and fusion plasmas and thence deriving fundamental quantities such as chemical composition, neutral, electron and ion temperatures is incomplete with several gaps in our knowledge of many molecular spectra, particularly for radicals and excited (vibrational and electronic) species. However, the compilation of fundamental atomic and molecular data required for such plasma databases is rarely a coherent, planned research program, instead it is a parasitic process. The plasma community is a rapacious user of atomic and molecular data but is increasingly faced with a deficit of data necessary to both interpret observations and build models that can be used to develop the next-generation plasma tools that will continue the scientific and technological progress of the late 20th and early 21st century. It is therefore necessary to both compile and curate the A&M data we do have and thence identify missing data needed by the plasma community (and other user communities). Such data may then be acquired using a mixture of benchmarking experiments and theoretical formalisms. However, equally important is the need for the scientific/technological community to recognize the need to support the value of such databases and the underlying fundamental A&M that populates them. This must be conveyed to funders who are currently attracted to more apparent high-profile projects.

  • PDF

대기중의 암모니아 및 암모늄염의 필터포집법에 관한 연구 (Study on the Filter Collection Methods of Ammonia and Ammonium Salts in the Atomosphere)

  • 김희강;교본방일;이용근
    • 대한화학회지
    • /
    • 제26권1호
    • /
    • pp.36-42
    • /
    • 1982
  • 대기중의 암모니아가스와 암모늄염의 필터포집법에 관하여 연구하였다. 표준가스 발생장치로 발생시킨 암모니아가스를 3% 붕산-25% 글리세린 혼합액이 스며든 유리섬유 필터에 포집하였다. pH조절법으로 발생시킨 암모니아가스와 대기중의 암모니아를 5회씩 포집하여 측정한 결과 포집효율은 각각 96.4${\pm}$ 2.15%와 97.4${\pm}$1.06%였다. 시판되는 유리섬유 필터 및 Polycarbonate 필터에 대하여 암모니아가스의 흡착 및 탈리현상을 검토한 결과 유리섬유 및 석영 섬유 필터에서는 암모니아가스의 흡착과 약간의 암모늄염이 탈리되었으나, Polycarbonate 필터는 대기중의 암모늄염을 포집하는데 적합한 것으로 판단되었다. 지름 47mm의 필터에 20l/min의 유량으로 60분동안 대기를 포집하여 인도페놀법에 의한 분광광도법으로 측정 할 경우, 측정가능한 암모니아가스의 최저농도는 0.83ppb (약 0.63$\mug$/$m^3$)이다. 이 방법은 종래의 용액포집법에 의한 분광광도 측정법에 비하여 감도가 20배나 높으므로 대기중의 암모니아 농도의 변화를 단시간(약 60분)내에 측정할 수 있다.

  • PDF