• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.734-738
• /
• 2017

본 연구에서는 가스다이내믹 공진 점화시스템 (Gas-dynamic Ignition System)의 온도상승 지배인자를 파악하고, 공진관으로의 질량유입 패턴의 영향에 대해 연구하였다. OpenFOAM 프로그램을 이용하여 세 가지 Case에 대한 전산해석을 수행하였으며, RhoCentralFoam을 적용하였다. 해석결과로, 작동유체의 가열이 공기열역학적 현상에 의한 것임을 밝히고, 공진관으로의 원활한 질량유입이 온도 상승에 중요한 지배인자임을 확인하였다.

• 오토저널
• /
• 제13권2호
• /
• pp.67-87
• /
• 1991

The computer program which predicts the gas exchange process of multi-cylinder 4-Stroke cycle spark-ignition engine, can be great assistance for the design and development of new engine. In this study, the computer program was developed to predict the gas exchange process of multi-cylinder four stroke cycle spark ignition engine including intake and exhaust systems. When gas exchange process is to be calculated, the evaluation of the variation of the thermo-dynamic properties with time and position in the intake and exhaust systems is required. For the purpose, the application of the generalized method of characteristics to the gas exchange process is known as one of the method. The simulation model developed was investigated to the analysis of the branch system of multi-cylinder. The models used were the 2-zone expansion model and single zone model for in cylinder calculation and the generalized method of characteristic including area change, friction, heat transfer and entropy gradients for pipe flow calculation. The empirical constants reduced to least number as possible were determined through the comparison with the experimented indicator diagram of one particular operation condition and these constants were applied to other operating condition. The predicted pressures in cylinder were compared with the experimental results over the wide range of equivalence ratio and ignition timing. The predicted values have shown good agreement with the experimental results. The thermodynamic properties in the intake and exhaust system were predicted over the wide range of equivalence ratio and ignition timing. The obtained results can be summarized as follows. 1. Pressures in the exhaust manifold have a little influence on the equivalence ratio, a great influence on the ignition timing. 2. Pressures in the inlet manifold are nearly unchanged by the equivalence ratio and the ignition timing. 3. In this study, the behaviors of the exhaust temperature, gas in the exhaust manifold were ascertained.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1218-1226
• /
• 1994

The shock tube is a useful device for investigating shock phenomena, spray combustion, unsteady gas dynamics, etc. Therefore, it is necessary to analyze exactly the flow phenomena in shock tube. In this study, the mechanics of its reflected shock zone has been investigated by using of the one-dimensional gas dynamic theory in order to estimate the transition from initial reflection of shock wave region. Calulation for four kinds of reflected shock tube temperature (i.e. (a) 1388 K (b) 1276 K (c) 1168 K (d) 1073 K) corresponding to the experimental conditions have been carried out sumarized as follows. (1) The qualitative tendency is almost the same as in that conditions in region of reflected wave region. (2) High temperature period (reflected shock wave temperature) $T_{5}$, exists 0-2.65 ms. (3) Transition period from temperature of reflection shock wave is far longer than the calculated one. This principally attributed to the fact that the contact surface is accelerated, also, due to the release of energy by viscoity effect. This apparatus can advance the ignition process of a spray in a ideal condition that involved neither atomization nor turbulent mixing process, where, using a shock tube, a column of droplets freely from atomizer was ignited behind a reflected shock.

• Advances in aircraft and spacecraft science
• /
• 제7권5호
• /
• pp.425-440
• /
• 2020

The work presented herein is a numerical investigation of the flow field inside a resonant igniter, with the aim of predicting the performances in terms of cavity temperature and noise spectrum. A resonance ignition system represens an attractive solution for the ignition of liquid rocket engines in space missions which require multiple engine re-ignitions, like for example debris removal. Furthermore, the current trend in avoiding toxic propellants leads to the adoption of green propellant which does not show hypergolic properties and so the presence of a reliable ignition system becomes fundamental. Resonant igniters are attractive for in-space thrusters due to the low weight and the absence of an electric power source. However, their performances are strongly influenced by several geometrical and environmental parameters. This motivates the study proposed in this work in which the flow field inside a resonant igniter is numerically investigated. The unsteady compressible Reynolds Averaged Navier-Stokes equations are solved by means of a finite volume scheme and the effects of several wall boundary conditions are investigated (adiabatic, isothermal, radiating). The results are compared with some available experimental data in terms of cavity temperature and noise spectrum.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.75-78
• /
• 2017

We reports improved monitoring performance of Self plasma-optical emission spectroscopy (SP-OES) by augmenting a by-pass tube to a conventional straight (or single) tube type self plasma reactor. SP-OES has been used as a tool for the monitoring of plasma chemistry indirectly in plasma process system. The benefits of SP-OES are low cost and easy installation, but some semiconductor industries who adopted commercialized SP-OES product experiencing less sensitivity and slow sensor response. OH out-gas chemistry monitoring was performed to have a direct comparison of a conventional single type tube and a by-pass type tube, and fluid dynamic simulation on the improved hardware design was also followed. It is observed faster pumping out of OH from the chamber in the by-pass type SP-OES.