• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.403-411
• /
• 2001

A criterion for evaluation of burners has changed recently, and the environmental problems are raised as a global issue. Burners with higher thermal efficiency and lower oxygen in the exhaust gas, evaluated better. To comply with environmental regulations, burners must satisfy the $NO_x$ and CO regulation. Consequently. 'good burner' means one whose thermal efficiency is high under the constraint of $NO_x$ and CO consistency. To make existing burner satisfy recent criterion, it is highly recommended to develop a feedback control scheme whose output is the consistency of $NO_x$ and CO. This paper describes the development of a real time flame diagnosis technique that evaluate and diagnose the combustion states, such as consistency of components in exhaust gas, stability of flame in the quantitative sense. In this paper, it was proposed on the flame diagnosis technique of burner using Neuro- Fuzzy algorithm. This study focuses on the relation of the color of the flame and the state of combustion. Neuro- Fuzzy learning algorithm is used in obtaining the fuzzy membership function and rules. Using the constructed inference algorithm, the amount of $NO_x$ and CO of the combustion gas was successfully inferred.

• 한국세라믹학회지
• /
• 제43권7호
• /
• pp.427-432
• /
• 2006

The preparation of SiC powder by SHS in the system of $SiO_2-Mg-C$ was investigated in this study. The effects of various processing parameters such as the initial pressure of inert gas in reactor, the content of Mg and C in mixture and the size of $SiO_2$ particles on the synthesis of SiC by SHS methode were investigated. The minimum initial pressure of inert gas in reactor for SHS reaction in this system was 5 atm, and as the pressure increased, and the concentration of unreacted Mg decreased. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure SiC was $SiO_2+2.5Mg+1.2C$. SiC powder synthesized in this condition had a mixture of ${\alpha}-SiC\;and\;{\beta}-SiC$ with an irregular shape and the particle size of $0.5{\sim}0.8{\mu}m$.

• 한국정보통신학회논문지
• /
• 제11권12호
• /
• pp.2327-2334
• /
• 2007

본 논문에서는 가스터빈의 연소진동 데이터의 취득, 저장, 표시를 위한 모니터링 시스템의 구현에 있어 통신 속도의 향상 및 데이터 저장 공간을 축소시킬 수 있는 방안을 제시한다. 제안된 방법은 샘플 원시 데이터(Raw Data)로 부터 FFT를 수행하고 결과 데이터를 코드화 하여 모니터링 PC로 전송하여 저장함으로서 데이터 저장 공간을 줄일 수 있다. 수신된 데이터를 화면에 표시하기 위한 원신호로의 복원은 역 FFT에 의해 이루어진다. 제안된 방식의 타당성과 효율성 검증을 위해 시뮬레이션을 수행하였으며, FFT 차수와 Gibbs's 효과간의 상관관계를 분석하였다. 모의 가스터빈의 연소실험을 통해 제안된 데이터 처리 및 저장 방법의 우수성을 검증하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.107-112
• /
• 2008

동해가스전과 같이 해저면 심부에 위치한 저류층의 경우 CMP 단면도 상에서 AVO 반응을 관찰하기가 어려운 경우가 종종 발생한다. 이렇게 심부저류층인 경우 고결성이 증가하기 때문에 매질의 공극유체가 가스로 치환되더라도 매질의 P파 속도가 크게 감소하지 않으며 이로 인해 AVO 반응 확인이 어렵다. 본 연구에서는 상.하부층의 포아송비를 달리하면서 포아송비의 차이가 작아질수록 입사각에 따른 반사진폭의 변화량이 작아져 AVO 반응이 미미해짐을 관찰하였다. 이 결과를 토대로 동해가스전의 AVO 반응의 한계점을 고찰하기 위해서 탄성파 자료와 물리검층 자료를 이용하여 고래 V 구조를 모사한 속도모델을 만들고 합성탄성파 탐사자료를 생성하였다. 매질의 성질을 이용하여 이론적으로 계산한 AVO 반응과 실제 합성탄성파 자료를 처리하여 얻은 AVO 반응을 비교한 결과, 상.하부층의 포아송비의 차이가 작을 경우 입사각에 따른 반사진폭 변화가 매우 작으며 잡음이나 전처리 과정 중에서 발생하는 진폭 왜곡에 의해 AVO 반응 특성이 가려짐을 확인할 수 있었다. 이러한 심부저류층의 AVO 분석의 한계점을 극복하기 위해서는 자료취득 단계부터 정확한 반사파 진폭을 획득해야 하며 자료처리 과정에서도 반사파 진폭을 보존할 수 있는 기술이 필요하다.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.511-515
• /
• 2014

The thermodynamic instability of bubbles in wet-foam colloidal suspension is due to the substantial area of their gas/liquid interface. Several physical processes lead to gas diffusion from smaller to larger bubbles, resulting in a coarsening and Ostwald ripening of wet foam. This includes a narrowing of the bubble size distribution. The distribution and microstructure of porous ceramics, the adsorption free energy and Laplace pressure of $Al_2O_3$ particle-stabilized colloidal suspension, and $SiO_2$ content were investigated for tailoring the bubble size. Wet-foam stability of more than 80% is related to the degree of hydrophobicity with contact angles of $62-70^{\circ}$ achieved from the surfactant. The contact angle replaces part of the highly energetic interface and lowers the free energy of the system. This leads to an apparent increase in the surface tension (26-33 mN/m) of the colloidal suspension.

• 플랜트 저널
• /
• 제8권4호
• /
• pp.40-44
• /
• 2012

천연가스를 사용하기 위한 전처리공정에서 제거되는 물질인 산성 가스는 주로 아민계열 흡수제를 이용한 흡수공정을 통해 제거된다. 흡수공정 중 흡수탑에서 일어나는 흡수제의 산성가스 흡수반응은 발열반응이기 때문에 상대적으로 낮은 온도가 요구되며 역 반응이 일어나는 재생탑은 흡열반응을 위한 높은 온도 환경이 요구된다. 이는 두 탑의 흐름들 간에 열교환의 가능성이 있음을 의미한다. 본 연구에서는 DEA 흡수제를 이용한 흡수공정을 다양한 조건에서 사례연구를 시행하여 에너지 시스템을 분석하였으며, 흡수탑과 재생탑의 측면유출이 흡수공정의 전체 효율을 향상시킬 수 있음을 확인하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.191-197
• /
• 1998

The recent results of the engine development performed in this you on Turbogreen 1200, the first industrial gas turbine engine developed in Korea, are presented. In order to improve the engine performance and structural stability from the first prototype engine, several variants of the engine and major components such as combustor and rotor assembly have been developed and tested. This paper shows these results especially focused on the engine test and performance analysis, in which test system, instrumentation and data processing are discussed as well. The engine performance and its trend give relatively good coincidence with the design ones. At design power of 1.2MW, the thermal efficiency of the engine is estimated over $25\%$ which is below the design target of $27.2\%$. This gap of efficiency is caused mainly by large tip clearance between turbine blades and casing. Considering high design efficiency superior to those of other competitive engines in this power class, Turbogreen 1200 would have a strong competition in its performance if the design efficiency is achieved by further developments such as tip clearance control, which are very possible and natural in final mass production of the developed gas turbine engine.

• 한국식품과학회지
• /
• 제26권3호
• /
• pp.195-198
• /
• 1994

Yeast 발효공정에서 발생되는 가스량을 전자적으로 monitoring 할 수 있는 새로운 기포수 계측 쎈서를 설계, 제작하였다. 본 기포쎈서는 기체를 발생하는 발효공정에 적용할 수 있으며 공정의 상태와 환경에 아무런 변화를 주지 않도록 설계하였다. 그 구조는 가스포집부, 기포형성부, 전자식 기포감지부와 컴퓨터 접속장치로 구성하였다. 기포 계측부는 photo-interrupter카 counter IC 등을 사용하였다. 제작된 쎈서와 컴퓨터 시스템은 효모 배양공정에 활용하여 발효진행과정을 자동적으로 monitoring 하는데 성공하였으며 발효공정에서 발생된 기포수의 값으로 작성된 가스발생량 곡선은 효모의 생육곡선의 양상과 매우 유사한 모양을 보였으며 배양액의 기질영양원이 달리한 발효공정을 monitering한 결과 기질이용 특성도 정확하게 표현할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.237-240
• /
• 2003

Gas turbines are extensively used in flight propulsion, electrical power generation, and other industrial applications. During its life span, a turbine blade is taken out periodically for repair and maintenance. This includes re-coating the blade surface and re-drilling the cooling holes/channels. A successful laser re-drilling requires the measurement of a hole within the accuracy of ${\pm}0.15mm$ in position and ${\pm}3^{\circ}$ in orientation. Detection of gas turbine blade/vane cooling hole position and orientation thus becomes a very important step for the vane/blade repair process. The industry is in urgent need of an automated system to fulfill the above task. This paper proposes approaches and algorithms to detect the cooling hole position and orientation by using a vision system mounted on a robot arm. The channel orientation is determined based on the alignment of the vision system with the channel axis. The opening position of the channel is the intersection between the channel axis and the surface around the channel opening. Experimental results have indicated that the concept of cooling hole identification is feasible. It has been shown that the reproducible detection of cooling channel position is with +/- 0.15mm accuracy and cooling channel orientation is with +/$-\;3^{\circ}$ with the current test conditions. Average processing time to search and identify channel position and orientation is less than 1 minute.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.83-88
• /
• 2000

Laser cladding processing allows rapid transfer of heat to the material being processed with minimum conduction into base metal, resulting in low total heat input. The effects of Nd:YAG laser cladding with wire feeding on the mechanical properties of Inconel alloy were investigated. inconel alloy is used as the material of nuclear steam generator tubing because of its mechanical properties and corrosion resistance properties. The device for Nd:YAG laser cladding with wire feeding was designed. It consists of the wire feeding system, the wire cladding system and the shielding gas system which prevents the clad layer from being oxidized. Experimental as results indicated that the wire feeding direction and position were important for laser cladding with wire feeding. The wire feeding speed should be adapted according to cladding speed for good shaping of clad layer. The effect of heat on the HAZ size can be limited and the growth of grain size of HAZ size was not serious. The hardness of clad layer and heat affected zone increased with increasing of cladding speed.