• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.49-53
• /
• 2008

A fuzzy inference logic system is proposed for gas turbine engine fault isolation. The gas path measurements used for fault isolation are exhaust gas temperature, low and high rotor speed, and fuel flow. The fuzzy inference logic uses rules developed from a model of performance influence coefficients to isolate engine faults while accounting for uncertainty in gas path measurements. Inputs to the fuzzy inference logic system are measurement deviations of gas path parameters which are transferred directly from the ECM(Engine Control Monitoring) program and outputs are engine module faults. The proposed fuzzy inference logic system is tested using simulated data developed from the ECM trend plot reports and the results show that the proposed fuzzy inference logic system isolates module faults with high accuracy rate in the environment of high level of uncertainty.

• 에너지공학
• /
• 제16권1호
• /
• pp.1-6
• /
• 2007

The purpose of this study was to investigate the reduction of exhaust gas temperature in a LPG engine that had been converted from a diesel engine. A conventional diesel engine was modified to a LPG (Liquefied Petroleum Gas) engine by replacing the diesel fuel injection pump with a LPG fuel system. The research was performed by measuring the exhaust gas temperature upon varying spark ignition timing, airfuel ratio, compression ratio, and different compositions of butane and propane. Engine power and exhaust temperature were not influenced by various butane/propane fuel compositions. Finally, among the parameters studied in this investigation, spark ignition timing is one of the most important in reducing exhaust gas temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2082-2085
• /
• 2002

This paper describes the development of a gas turbine engine simulator in detail. The simulator presented in this paper has a mathematical engine model based on a target gas turbine engine performance data and is developed for generating a gas turbine engine sensor signals between the hardwares and softwares of a gas turbine engine control system using Data Acquisition systems(DAS) and 1553B communication, a aeronautic standard communication specification. In addition, this paper proves the excellent performance of this simulator by showing the results of a gas turbine engine field test and simulation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.587-590
• /
• 2017

마이크로 가스터빈엔진의 성능 실험연구를 수행하였다. 성능측정을 위하여 마이크로엔진에 적합한 시험장치를 구축하였으며, Olympus HP Engine을 이용하여 성능측정을 수행하였다. 엔진흡입 공기유량, 추력, 연료소모율, 각 구성품 입구에서의 공기 및 가스온도를 측정하였다. 측정된 결과부터 마이크로 가스터빈 엔진의 성능특성을 보다 잘 이해할 수 있었다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2000년도 추계학술발표회 논문집
• /
• pp.130-136
• /
• 2000

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2000년도 추계학술발표회 논문집
• /
• pp.137-142
• /
• 2000

• 연구논문집
• /
• 통권23호
• /
• pp.121-126
• /
• 1993

In general, natural gas engine converted from gasoline engine has disadvantage of power decrease. In order to increase power output in natural gas engine, the improvement of in-cylinder flow motion has been believed as the most effective method. In this study, the geometry of combustion chamber in 4 valve DOHC natural gas engine is modified, and in-cylinder flow patterns are analyized. Also engine performance is evaluated according to the modification of in-cylinder flow motion.

• 한국수소및신에너지학회논문집
• /
• 제10권4호
• /
• pp.233-243
• /
• 1999

Combustion characteristics of synthetic gas from flame pyrolysis gasification of polymetric wastes are reported and the applicability of synthetic gas from flame pyrolysis gasification to a gas engine system is presented. Engine power is easily predicted by the volume percentage of the synthetic gas. Measurements have been made to obtain the range of flame existence in the function of volume percentage of CO and $H_2$ gases in the synthetic gas. In order to clarify the emission of the flames, NOx measurements by chemiluminescent analyser are taken in flames with different equivalent ratios. From the results of the engine performance data we also have demonstrated that the output of the gas engine modified from a LPG engine is about 5 ps at normal rating. We conclude that synthetic gas from flame pyrolysis gasification of polymetric wastes is applicable to a gas engine system.

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.189-198
• /
• 1997

In order to find out the potential of LP gas as a substitute fuel for small fm engine, experiments were carried out with a four-stroke spark-ignition engine which was modified from a kerosene engine mounted on the power tiller. Performance characteristics of kerosene and LP gas engine such as torque, volumetric efficiency fuel consumption rate, brake thermal efficiency, exhaust temperature, and carbon monoxide and hydrocarbon emissions were measured and analyzed under various levels of engine speed and compression ratio. The results were summarized as follows. 1. It showed that forque of LPG engine was 41% lower than that of kerosene engine with the same compression ratio, but LPG engine with compression ratio of 8.5 it was showed similar torque level to kerosene engine with compression ratio of 4.5. 2. Fuel consumption of LPG engine was reduced by about 5.1% and thermal efficiency was improved by about 2% compared with kerosene engine with the same compression ratio. With the incrasing of compression ratio in LPG engine fuel consumption rate decreased and thermal efficiency increased. 3. Exhaust temperature of LPG engine was about 15% lower than that of kerosene engine. Concenrations of emissions from LPG engine was affected insignificantly by compression ratios, and carbon monoxide emissions from the LPG engine was not affected by engine speed so much. The carbon monoxide and hydrocarbon emissions from LPG engine were about 94% and 66% lower than those of kerosene engine, respectively.

• 한국가스학회지
• /
• 제17권6호
• /
• pp.20-26
• /
• 2013

본 연구에서는 기존 상용 12리터급 경유엔진을 베이스로, 천연가스 연료공급시스템을 추가함으로써 천연가스-경유연료를 동시에 사용하는 혼소엔진을 개발하였다. 전체적인 제어는 기존의 경유엔진 ECU를 이용하고, 추가적인 혼소 ECU를 제작하여 경유와 천연가스 연료가 최적으로 공급되도록 시스템을 구성하였다. 천연가스 연료는 MPI 방식으로 흡기메니홀드에 어뎁터를 이용하여 설치하였다. 혼소엔진의 실험결과, 경유엔진과 동등한 토크와 출력성능을 얻었으며, 배출가스 기준 또한 만족하였다. 전체적인 천연가스 연료 대체율은 70%이고, 주 사용영역에서는 약 76%의 대체율을 보였으며, 이로 인한 연료비용 절감효과는 전체 37% 및 주 사용영역에서는 40%를 얻었다.