• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.1-13
• /
• 1997

The key point that guarantees the durability of the ceramic monolith filter is to lower peak temperature and temperature gradient inside filter during regeneration. The control of the exhaust gas flow rate into the filter, by the bypass technique of the exhaust gas, enables the gas temperature in filter to be constant for regeneration. A couple of methods, which are the ON/OFF and PID control of the bypass valve, were used for feedback control of the gas temperature. These techniques showed that the ceramic filter was regenerated perfectly under the peak temperature and peak temperature gradient limitations for durability.

• 한국생산제조학회지
• /
• 제26권4호
• /
• pp.387-394
• /
• 2017

This paper develops a pump system for patient with chronic pain or cancer. The pump module is consists of two micro-valve and membrane. The micro-valve is operated by a solenoid. With two solenoid valves which are connected via a drug transport line, the inlet and outlet are completely blocked. A silicon rubber membrane located between the two valves makes the flow-rate constant without any backflow. This pump module can control the flow-rate of drugs by controlling the time that the valves are opened and closed. The reservoir consists of a drug chamber and a gas chamber. As the gas chamber encloses the drug chamber, propellant gas which is injected into the gas chamber pressurizes the drug chamber regardless of volume of the drug chamber. To design the pump module, analysis a constant efficiency test, and accuracy test for the pump module were conducted.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.99-104
• /
• 2015

천연가스의 이송을 위해 현재까지 가장 효율적인 방법은 액화를 통한 운반이다. 천연가스를 액화하기 위해서는 $-160^{\circ}C$이하로 냉각시켜야 하는데, 그 방법에는 여러 가지가 있다. 본 논문에서는 가장 대표적인 액화 공정인 C3MR 공정에 대한 제어 방법에 대해 연구하였다. 천연가스 액화 공정의 제어는 천연가스 품질을 유지할 수 있는 도구이며 안정된 운전을 보장하는 수단이다. C3MR 공정을 분석하고 제어 밸브에 대한 제어 변수를 선택하고 제어 변수의 계단 응답 결과를 통해 혼합냉매의 제어 구조를 도출 하였다. 도출된 제어 결과를 동적 모사를 통해서 임의로 외란을 주어 정상상태를 유지하는 결과를 확인 하였다.

• International Journal of Safety
• /
• 제11권2호
• /
• pp.10-14
• /
• 2012

Recently, the combined power plants are refocused rapidly as a replaceable energy system of the nuclear power plant. The large turbine is revolved highly at 1800~3600 rpm. Thus, the turbine speed should be monitored with mechanical and electrical method for a safety. The electrical cutoff valve which blocks the flow channel with the electrical signal is with a built in. The aim of this study is to develop a manufacturing technology through by the localization of a solenoid actuated directional control valve. Especially the results show performances of the solenoid valve by the experiments and modeling and the reliability estimation. Applied load port pressure was changed rapidly on the form of a quadratic curve over time. And in the cases of square waveform when 0~100 V and 20~120 V input voltage, it was driven on a stable state until 13.4 Hz and 16.6 Hz, respectively. We think that this study will give useful data for the electricity safety system of the combined power plant gas turbine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권7호
• /
• pp.1003-1011
• /
• 2009

This study aims at precise control of oil outlet temperature in the oil cooler system of machine tools for enhancement of working speed and processing accuracy. PID control logic is adopted to obtain desired oil outlet temperature of the oil cooler system with hot-gas bypass method. We showed that the gains of PID controller could be easily determined by using gain tuning methods to get the gain of PID controller without any mathematical model. We also investigated various gain tuning methods to design the gains of PID and compared each control performance for selecting the optimal tuning method on the hot gas bypass method through experiments. Moreover, we confirmed excellent control performance with proposed PI controller gain even though disturbances were abruptly added to the experimental system.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.293-298
• /
• 2011

덕티드로켓 추진기관에 사용되는 불완전연소 가스발생기 및 유량조절시스템을 설계/제작하고 연소시험을 수행하여 유량조절특성을 분석하였다. 추진시스템 설계요구조건을 바탕으로 가스발생기를 설계하고 불완전연소용 고체연료 조성을 개발하여 연소시험을 수행, 일반적인 고체추진기관 해석모델을 통한 예측결과와 상당한 차이의 실험결과로부터 불완전 연소가스를 위한 별도의 해석모델이 요구됨을 확인하였다. 유량조절 시험을 통해 밸브각도에 따른 가스발생기 압력변화 특성을 확인하였고, 출구면적에 따라 유일하게 결정되는 유출계수로부터 가스발생기 압력을 예측하는 방법을 도출하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.25-28
• /
• 2004

The purpose of this paper is to present essential numerical data of FCV(Flow rate Control Valve) which is used in a projectile ejection system for a underwater vehicle. A commercial CFD code is applied to analyze the 3 dimensional viscous compressible flow field within the FCV as four cases of opening rate, 25, 50, 75, and $100\%$. The flow coefficient of each cases are mainly calculated. And other characteristics such as the location of shock wave and total temperature distribution are also determined.

• 한국항공우주학회지
• /
• 제48권9호
• /
• pp.717-724
• /
• 2020

본 논문에서 액체로켓엔진용 연소기 산화제 개폐밸브로 사용되는 밸브 개방 자체유지가능형 포핏 밸브의 밸브 닫힘 작동특성에 대한 연구 내용을 소개하기로 한다. 상온 및 극저온 환경에서 밸브 닫힘 특성을 예측할 수 있는 수치해석 방법을 제시하였으며, 시험결과와의 비교를 통해 계산결과의 신뢰성을 검증하였다. 본 연구를 통해 상온 및 극저온 작동 환경에서 각각 구동가스 배출 시스템의 유효 유로 면적과 밸브 작동부에 작용하는 운용유체의 압력 분포가 밸브의 전반적인 닫힘 작동특성을 좌우하는 주요 변수인 것을 확인하였다. 또한 극저온 작동 환경에서 구동가스를 적절히 활용함으로써, 밸브 닫힘 압력을 유연하게 조정할 수 있을 뿐만 아니라 밸브 닫힘 속도 또한 효과적으로 감소시킬 수 있음을 확인하였다.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.18-24
• /
• 2015

In this study, a $CO_2$ air-conditioning system was investigated with different types of electrically driven compressors, parallel flow type gas cooler, four-pass type evaporator, internal heat exchanger integrated with accumulator, and electric expansion valve. The experimental study was conducted under various operating conditions (ie., different rotational compressor speeds, air inlet temperatures and air velocity coming into heat exchangers). The experimental results showed the cooling capacity was 3.5kW at $35^{\circ}C$ ambient temperature when the vehicle was idle (ie., the worst condition for cooling off the gas cooler). In terms of performance effect of the compressor, the e-RP model had a slightly better cooling capacity and coefficient of performance than the e-GR model under the same test conditions. An experimental equation for optimum cooling-performance control was also suggested based on the results. A high-pressure control algorithm for the super critical cycle was determined to achieve both maximum cooling performance and efficient energy consumption. The results from the experimental equation coincided with those of previous experimental studies.

• 한국분무공학회지
• /
• 제27권3호
• /
• pp.117-125
• /
• 2022

This study examines whether engine fuel efficiency is improved by optimization of the exhaust valve timing in a state where the intake valve timing has been optimized in a small turbo gasoline engine that has intake cams and exhaust cams with fixed valve opening periods. When the exhaust valve is opened late, the expansion stroke is longer, and the efficiency can be improved. A 2-cylinder turbo gasoline engine with 0.8 liters of displacement and an MPI (Multi Point Injection) fuel system was used. The engine was operated at 1,500 and 3,000 rpm, and the load conditions included a partial load of 50 N·m and a high load of 70 N·m. Data was recorded as the exhaust valve timing was controlled, and this was used to calculate the efficiency of combustion using a heat release, the fuel conversion efficiency, and the pumping loss. Results and the hydrocarbon concentrations in the exhaust gas were compared for each condition. Experiment results confirmed that additional fuel efficiency improvements are possible through exhaust valve timing control at 1,500 rpm and 50 N·m. However, in other operating conditions, fuel efficiency improvements could not be obtained through exhaust valve timing control because cases where the pumping loss and fuel/air mixture slip increased when the exhaust valve timing changed and the fuel efficiency declined.