• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.587-591
• /
• 2011

To improve the performance of the control butterfly valve seals are used to eccentric shaft. In this case, vertical opening gas of the butterfly valve is non-symmetrical, which will change the flow pattern around the valve. In this study, the eccentric drive shaft of the butterfly valve to change flow characteristics are performed numerically. Flow pattern and pressure drop are investigated as the valve opening angle increases for a given mass flow rate. The valve flow coefficient is compared to the without eccentric shaft.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.105-111
• /
• 2003

ORVR filler neck check valve, which is one of the essential components of the vapor fuel control system, should diminish the evaporation by maintaining laminar fluid flow on refueling process. This study presents numerical. results of pressure and velocity distributions of the fluid flow in a ORVR filler neck check valve on refueling process. CFD-ACE+ has been employed for numerical analysis based on the information of experimental results of valve position as a function of inlet flow rate. No abrupt pressure change, which may causes vaporization of fuel, has been confirmed to take place on the concave surface of the valve spool. However, it is clear that some possibility exist at the mid-position of surface of valve spool and downstream according to the opening of valve.

• 한국가시화정보학회지
• /
• 제10권1호
• /
• pp.15-20
• /
• 2012

PCV(Positive Crankcase Ventilation) system is designed to remove blowby gas. In this system, a PCV valve is attached in a manifold suction tube to control the flow rate of blowby gas which generates various operating conditions of an automotive engine. As this valve plays a crucial role, the demand in its design is high owing to the small size and high velocity. For this reason, a numerical investigation was carried out to understand both the spool dynamic motion and internal fluid flow characteristics. As a result, the spool dynamic characteristics(i.e. displacement, velocity, acting force), increase in direct proportion to the magnitude of the pressure difference and indicate periodic oscillating motions. Moreover, the velocity at the orifice region decreases according to the increase in differential pressure due to energy loss caused by the sudden decrease of flow area at the orifice region and the increase of flow volume in front of the spool head. Finally, the mass flow rate at the outlet decreases with the increase of spool displacement.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.45-48
• /
• 2001

본 연구에서는 수동동작에서 표본화된 시간에서의 변위값들을 일련의 명령어로 변환하여 컴퓨터의 제어 신호로서 직류모터의 위치를 조작하여 동작시키는 것이다. 실제 실험에 있어서 기술상의 문제였던 가스의 정밀조정이 가능하였고 조작이 간편하여 사용상의 편리성을 얻을 수 있었다. 또한 자동 가스 조절용 직류모터의 실시간 모니터링 시스템을 연구, 개발함으로써 제품의 품질을 향상시킬 수 있었고, 전체 설비의 개발 또한 용이할 것으로 사료된다.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.967-975
• /
• 2000

Transient characteristics of a boiler and turbine system for a steam power plant are simulated. One-dimensional unsteady models are introduced for each component. An interaction between boiler and turbine and a control of the water level in the drum are taken into account. Transient responses of the system to the variations of main system variables such as fuel and air flow rate, cooling water injection rate at the attemperator, gas recirculation rate at the furnace and opening of the turbine control valve are examined. Effect of fluid inertia and tube wall thermal inertia on predicted dynamic behavior is investigated.

• 한국항공우주학회지
• /
• 제48권10호
• /
• pp.801-807
• /
• 2020

밸브 입구 압력 변화에 따른 액체로켓엔진용 연소기 산화제 개폐밸브의 개방 특성에 대해 시험을 통한 연구를 수행하였다. 연소기 산화제 개폐밸브의 포핏 방식 밸브 특성에 의해 밸브 입구 압력이 상승함에 따라 밸브 개방에 필요한 구동압력은 선형적으로 증가하며, 밸브 행정 시간은 감소하게 된다. 하지만 밸브 입구 압력 상승으로 밸브 개방 구동압력 도달까지의 시간이 길어져 전체적인 밸브 개방 시간이 증가하는 것으로 나타났다. 결국 밸브 입구 압력이 증가할수록 밸브 행정 시간의 감소량은 미미해지며 밸브 개방에 필요한 구동압력에 도달하는데 필요한 시간이 밸브 개방 시간을 좌우한다는 것을 확인하였다. 따라서 밸브 구동부에 대한 설계를 통해 밸브 개방 시점의 밸브 입구 압력과 연소기로의 순간적인 산화제 공급량을 조정할 수 있다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.441-447
• /
• 2005

The present study is aimed at understanding the flow physics associated with a safety valve applied to LNG ship engines. One-dimensional gasdynamic analyses and axisymmetric, compressible Navier-Stokes computations have been carried out to provide a qualitative and quantitative knowledge base for an effective design of the safety valve. Gasdynamic forces and thrust coefficients are obtained regarding a change in chamber pressure and distance between the nozzle exit and valve sheet which are major parameters to offer a variation in the flow feature. The present results show that the control of the passage area between the nozzle exit and valve sheet can attenuate the strength of shockwave generated in front of the valve sheet, which causes harm to stable system operation.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.37-44
• /
• 2001

This study is focused on the development of a new muffler. A control valve installed in the exhaust system is operated by torsion springs, and its open angle is controlled automatically corresponding to the engine operating conditions. The experiments were done using an exhaust system simulator having the same pulsation wave frequency and similar pulsation propagation characteristics of a real exhaust system. The purpose of this study is to develop a new muffler system which has improved noise reduction quality and less power loss than conventional mufflers and electronic-control mufflers.

• 한국가스학회지
• /
• 제22권1호
• /
• pp.1-8
• /
• 2018

수소연료전지 자동차 압력 용기에는 연료전지 스택으로 수소의 흐름을 제어하기 위해 전자 밸브가 부착되고 있다. 전자 밸브의 솔레노이드는 전기 신호에 의해 유로를 개폐하는 역할을 하며, 전원이 인가되는 시간이 경과함에 따라 온도가 상승하여 일정 온도에서 포화된다. 특히 온도의 상승은 솔레노이드의 흡인력을 감소시키므로 안정적인 수소 공급을 위해서 설계 시 포화 온도와 온도에 따른 흡인력 특성 파악이 요구된다. 본 연구에서는 솔레노이드 설계 변수에 따른 포화 온도 계산식을 제안하고 열 유동 해석을 통해 타당성을 확인하였다. 또한, 온도에 따른 흡인력 변화를 분석하기 위해 전자기장 해석을 수행하였으며 온도 특성 실험을 통해 포화 온도와 흡인력 해석 결과를 검증하였다. 포화온도는 계산식과 해석결과를 비교하였을 때 $5.3^{\circ}C$, 해석 결과와 실험 결과를 비교하였을 때 $5.9^{\circ}C$의 오차가 발생하였으며, 흡인력은 1.0 N, 최대 2.1 N의 오차가 발생하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.93-100
• /
• 2019

Nuclear and thermal power plants must provide the turbines with an appropriate degree of high temperature and high pressure steam, to produce the optimum electricity. Additionally, in the event of system and power system failure during electrical production, the steam is immediately disabled, to protect the turbines and generators rotating at high speed. The plant thus uses a special steam control valve system for turbine control, which is opened by force of the hydraulic servo actuator and closed by a large steel spring force. In this study, the causes of failure of the turbine control valve system, a key device of the power plants, were analyzed, and the causes of failure were improved relative to reliability of the equipment.