• 제목/요약/키워드: Gas control valve

검색결과 247건 처리시간 0.031초

유비쿼터스 센서 네트워크을 이용한 홈네트워크 시스템 구현에 관한 연구 (Study about the home network system implementation that used an ubiquitous sensor network)

  • 남상엽;박춘명
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2007년도 하계종합학술대회 논문집
    • /
    • pp.479-480
    • /
    • 2007
  • It is study about implementation of the home network system that used an ubiquitous sensor network and an embedded system in this paper. PXA270 and CC2420 were used, and the home server of a wireless sensor home network system composed it. A wireless control system is composed of a gas valve, a DC motor, a lamp and a door rock. A wireless detection system is composed of a gas detection sensor, a movement detection sensor, an extension detection sensor The wireless detection system that was an environment sensing system was composed of temperature, humidity, mic, illuminance, a speed-up, infrared rays temperature sensing module, and modular, other RFID established an USB camera, and an ubiquitous home network was composed.

  • PDF

하이브리드용 가솔린엔진의 EGR을 통한 연비향상에 관한 연구 (Study on Fuel Consumption Improvement in SI Engine with EGR for Hybrid Electric Vehicle)

  • 박철웅;최영;김창기
    • 한국자동차공학회논문집
    • /
    • 제16권2호
    • /
    • pp.128-135
    • /
    • 2008
  • EGR(exhaust gas recirculation) is considered as a most effective method to reduce the NOx emissions. But high EGR tolerance is always pursued not only for its advantages of the pumping loss reduction and fuel economy benefit in Gasoline-Hybrid engine. However, the occurrence of excessive cyclic variation with high EGR normally prevents substantial fuel economy improvements from being achieved in practice. Therefore, the optimum EGR rate should be carefully determined in order to achieve low fuel consumption and low exhaust emission. In this study, 2 liters gasoline engine with E-EGR system was used to investigate the effects of EGR on fuel efficiency, combustion stability, engine performance and exhaust emissions. With optimal EGR rates, the fuel consumption was improved by 4%. This improvement was achieved while a reduction in NOx emissions of 75% was accomplished. Increase of EGR gas temperature causes the charge air temperature to affect the knock phenomenon and moreover, the EGR valve lift changes for the same control signal.

차량용 CNG 레귤레이터의 성능특성에 관한 연구 (A Study on Performance Characteristics for a CNG Regulators of Automotive Vehicle)

  • 김창기;박철웅
    • 한국가스학회지
    • /
    • 제11권4호
    • /
    • pp.12-16
    • /
    • 2007
  • 천연가스 자동차에 탑재되어 있는 연료압력 레귤레이터는 연료분사시스템의 압력을 일정하게 유지하는 역할을 한다. 연료압력의 정확한 제어는 천연가스 자동차가 가지고 있는 높은 효율성과 청정성을 십분 활용하기 위해서 반드시 필요한 사항이다. 본 연구에서는 천연가스 레귤레이터의 성능을 정확하게 평가할 수 있는 고압실험장치를 구축하였으며, 이 장치를 이용하여 두 가지 방식의 천연가스 레귤레이터를 평가하고 상호 비교를 하였다. 레귤레이터 밸브시스템의 설계에 따라 여러 가지 레귤레이터 성능 특성 중 동적응답과 Creep특성이 영향을 많이 받는 것으로 나타났으며, 레귤레이터 입구 압력이 높을 경우 출구 가스의 온도가 급격히 감소하는 것으로 나타남으로써 아이싱문제를 효과적으로 방지할 수 있는 방안이 마련되어야 함을 확인할 수 있었다.

  • PDF

가열로의 실시간 최적 제어기 설계 (Design of Real Time Optimization Control System on Heating Furnace)

  • 조현섭;오명관
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2009년도 추계학술발표논문집
    • /
    • pp.633-635
    • /
    • 2009
  • It is a quite quality concerning to control temperature of single crystalline growth as it does when you get most of heat treating products. It is also important factor to control temperature when you make the $Al_2O_3$(single crystalline) used to artificial jewels, glass of watches, heat resistant transparent glasses. Thus, it is a major interest to get the proper temperature in accordance with the time process while you are making mixture of oxygen and hydrogen to have the right temperature. In this paper, we will study of electrical valve positioning system for the gas mixture to improve the quality of products.

  • PDF

Sequence sampling에 의한 단결정(Al$_2$O$_3$) 성장 제어 (Al$_2$O$_3$ Growth control by sequence sampling)

  • 조현섭;송용화;민병조
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2000년도 추계학술대회
    • /
    • pp.181-184
    • /
    • 2000
  • It is a quite quality concerning to control temperature of single crystalline it does when you get most of heat treating Products. It is also important control temperature when you make the A1203(single crystalline) used to jewels, 91ass of watches. heat resistant transparent 91asses. Thus, it is a md to get the proper temperature in accordance with the time process while making mixture of oxygen and hydrogen to have the right temperature. In we will study of electrical valve positioning system for the gas mixture to im quality of Products.

$Al_2O_3$성장을 위한 DC-MOTOR의 위치 제어 구현 (Implementation of Position Control DC-Motor for $Al1_2O_3$ Growth)

  • 이형충;박종국;조현섭
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2004년도 춘계학술대회
    • /
    • pp.213-216
    • /
    • 2004
  • It is a quite quality concerning to control temperature of single crystalline growth as it does when you get most of heat treating products. It is also important factor to control temperature when you make the $A1_2O_3$(single crystalline) used to artificial jewels, glass of watches, heat resistant transparent glasses. Thus, it is a major interest to get the proper temperature in accordance with the time process while you are making mixture of oxygen and hydrogen to have the right temperature. In this paper, we will study of electrical valve positioning system for the gas mixture to improve the quality of products.

  • PDF

달 탐사를 위한 하이브리드 추진 시스템 추력제어 (Thrust Control of Hybrid Propulsion System for Lunar Exploration)

  • 문근환;한승주;김학철;김계환;김진곤;문희장
    • 한국추진공학회지
    • /
    • 제18권6호
    • /
    • pp.34-41
    • /
    • 2014
  • 본 연구는 달 탐사 적용을 위한 하이브리드 추진 시스템의 기초 연구로서 산화제 유량 제어를 통한 추력제어 연구를 수행하였다. 산화제 유량 제어를 위해 볼밸브(ball valve)와 스텝 모터(stepping motor)를 이용하여 유량 제어 시스템을 구축하였으며, 산화제 및 연료는 각각 기체 산소(gas oxygen)와 고밀도 폴리에틸렌(High Density PolyEthylene)을 사용하였다. 실험 결과 산화제 유량 제어를 통해 목표 추력 제어 비율(53%, 32%)로 추력제어가 이루어 졌으며, 각각의 구간 내에서 추력이 일정하게 유지 되는 것을 확인 하였다.

LPG충전소 유휴공간의 태양광발전설비 설치 유효성 (Validity of solar energy generation at the underused Space of LPG filling station)

  • 이민경;김정환;이진한;조영도;이연재
    • 한국가스학회지
    • /
    • 제20권4호
    • /
    • pp.25-32
    • /
    • 2016
  • 지난 2008년, LPG충전소와 유사한 주유소의 경우 관련법인 위험물관리법 개정을 통해 태양광발전설비의 설치가 합법화 되어 실제 몇몇 주유소에서 태양광발전설비가 운용되고 있다. LPG충전소의 경우 2015년부터 관련법이 개정되어 LPG충전소의 사무실, 캐노피 등의 유휴공간에 태양광발전설비 설치가 합법화 되었다. 일본의 경우 지난 2009년부터 LPG충전시설에 태양광발전설비를 설치하여 운용하고 있는 것이 조사되었다. 위험지역으로 분류되는 LPG충전소의 경우 작은 화재가 큰 사고로 이어질 가능성이 크다. 이에 본 연구에서는 전산유동해석을 통해 태양광발전설비 설치의 안전성에 대해 평가하고자 국내 외의 관련 기준과 사례를 조사하였다. 또한 조사된 결과를 바탕으로 가스유동해석 프로그램의 하나인 FLACS를 이용해 저장탱크 방출관과 자동차용 충전기 파손에 의한 누출을 가정하여 유동해석을 진행하였고, 캐노피에 설치된 태양광발전설비의 안전성에 대해 간접적으로 평가하였다. 그 결과 충분한 안전거리를 확보한다면 캐노피 상단으로의 폭발범위의 LPG가 유입되지 않는 것을 확인할 수 있었다.

하이브리드 다기능 용접기 제어 모드에 관한 연구 (A Study on control mode of hybrid multi-function welder)

  • 김진석;정양권;최재호
    • 한국전자통신학회논문지
    • /
    • 제8권3호
    • /
    • pp.439-445
    • /
    • 2013
  • 본 연구는 발전기와 충전기를 통합하여 필요에 따라서 용접기 또는 발전기로 사용할 수 있는 시스템에 관한 것이다. 구체적으로는, 발전기를 제어하는 제어장치와 다기능 용접기를 사용할 수 있도록 하는 선택 스위치로 구성된 하이브리드 용접기로써 그 기능은 발전기 전원을 충전지에 충전이 완료되면, 발전기는 자동 정지하도록 구성하는 부분과 Co2 MMA TIG MIG MAG 용접기를 모제와 용제에 따라서 공급하는 가스를 제어하도록 제안하였다. 이는 한 번에 한 가지 또는 두 가지 정도만을 선택하는 기존 용접기의 성능과 편리성을 개선하기 위해 전압, 고주파, 모터 그리고 가스 밸브를 제어하는 시스템을 구현하였다.

추력 제어를 고려한 액체로켓 엔진시스템 과도해석 (Transient Analysis of a Liquid Rocket Engine System Considering Thrust Control)

  • 박순영;최환석;설우석
    • 한국추진공학회지
    • /
    • 제8권4호
    • /
    • pp.67-75
    • /
    • 2004
  • 액체로켓 엔진시스템에 있어서 과도 해석은 시스템 시험 항목이나 시험 횟수의 선정과 개발 기간 등의 단축을 위해 반드시 필요한 항목이다. 본 연구에서는 터보펌프 공급식 로켓 엔진의 수학적 모델을 구성하였으며. 이를 이용하여 추력 제어 밸브의 개도 변화에 따른 엔진의 작동 모드 변화에 대한 과도해석을 수행하였다. 검증을 위하여 AnaSyn을 이용한 모드 해석 결과와 비교하여 2% 범위 내로 일치하는 것을 확인하였다. 또한 로켓 엔진 시스템의 과도해석 모델을 이용하여 엔진 구성품에 대한 시스템 차원의 설계 변수 결정이 가능함을 보였다. 압력안정기(pressure stabilizer)는 가스발생기 혼합비를 균일하게 유지시켜주는 장치로서, 이에 대한 감쇠 강제진동 모델을 세워 고유진동수와 감쇠비의 함수로 안정 영역을 구하였다.