• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1807-1809
• /
• 1996

The axial discharge at switching operations of EHV $SF_6$ disconnector can lead to the breakdown to the enclosure. Precursor in periphery zone leads to formation of leader over some time delay. Injected charge value depends on electric field and gap geometry. The calculation method for parameters of $SF_6$ insulation for DS in EHV-GIS is suggested by using the new criterion of leader inception in connection with periphery field nearby the boundary of streamer zone.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.179-182
• /
• 2011

The purpose of this study is to evaluate a defrost model for the possibility of defrosting on wheelhouse window and the heat capacity if defrosting nozzle by using the commercial CFD solver FLUENT. A detailed simulation model has been created which contains the defrosting nozzle, window and the interior/exterior forced convection boundary. In this numerical study, the heat and mass transfer coupled during defrosting and investigated the defrost time for different hot gas temperature, external wind speed and temperature condition.

• 터널과지하공간
• /
• 제29권4호
• /
• pp.262-279
• /
• 2019

고준위방사성폐기물처분장의 공학적 방벽에서는 다양한 원인으로 인해 기체가 발생한다. 만약 기체 생성 속도가 기체 확산 속도보다 빠를 경우 기체의 압력이 증가하게 되고, 기체 유입 압력(gas entry pressure)을 넘어서게 되면 기체가 급격히 벤토나이트 완충재를 통과하는 기체 이동 현상(gas migration)이 발생하게 되며 이는 사람과 주변 환경을 방사능에 노출시킬 수 있기 때문에, 공학적 방벽의 장기 건전성 확보 측면에서 기체 이동 현상을 명확히 규명하는 것이 매우 중요하다. 특히 벤토나이트 완충재와 같이 점토 물질을 다량 함유한 매질에서만 나타나는 매우 중요한 기체 흐름 현상인 팽창 흐름에 대한 수리-역학적 메커니즘을 규명하고, 기체 이동 현상의 정량적 평가를 위한 새로운 수치 해석 기법 개발 및 검증이 필수적이다. 따라서 본 연구에서는 공학적 방벽에서의 기체 이동 현상을 모사하고자 역학 손상 모델 및 손상도를 고려한 2상 유동 모델을 개발하였으며, 일정 체적 경계 조건 하에서의 1차원 기체 주입 시험 모사를 통해 개발된 모델의 적용성을 검토하였다. 수치 해석 결과 공극 수압 및 응력, 기체 유출량이 팽창 흐름 발생 시 급격히 증가하는 현상을 모사할 수 있었다.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.101-108
• /
• 2011

Understanding the exhaust gas recirculation (EGR) cooler fouling in diesel engine is important factor in the durability characteristic of a EGR system. We develope a test rig and PM feeder using carbon black to examine the effect of fouling on EGR cooler devices those were consisted of flat and shell & tube type. The EGR cooler fouling process is a complex interaction involving heat exchanger shape, boundary condition, constitutes, chemistry and operating mode. As the soot deposited to EGR cooler, these formed a thin deposit layer that was less heat exchange than the fresh status of tube enclosing the exhaust gas, resulting in lower heat exchange effectiveness in both type coolers. But these deposits caused different results in pressure drop, it is increased in flat type, but decreased in Shell & tube type of EGR cooler. A cause was estimated from a change of the flow structure and a decrease of contact area as the EGR cooler fouling.

• 전기화학회지
• /
• 제13권4호
• /
• pp.277-282
• /
• 2010

자동차용 고분자전해질 연료전지의 열화는 시동 또는 정지 시에 'reverse-current condition'이라 불리는 현상에 의해 촉진된다. 연료전지 자동차의 운전 종료 후 장시간동안 주차를 해 두면, 대기 중의 공기가 스택 내로 서서히 유입되어 시간이 경과함에 따라 산소분압이 점차 높아져 궁극적으로는 연료극과 공기극의 유로가 모두 공기로 충진된다. 이때 재시동하면서 연료극으로 수소가 공급되면, 연료극 유로 내에 수소와 공기가 공존하게 되고, 연료극에 공기가 존재하는 부위의 공기극에 1.4 V 이상의 높은 전압이 발생하는데, 이를 reverse-current condition 이라고 하며 공기극의 탄소담지체와 백금 촉매 산화의 원인으로 작용한다. 본 연구에서는 재시동시 스택 내에 존재하는 산소의 농도에 따른 열화 현상을 규명하고자 하였다.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.120-126
• /
• 1991

본 연구에서는 Kawabata가 제안한 직접수치해법(direct numerical solution method)을 확대하여 윤활표면으 국부 회소가스 효과(local rarefaction effect)로 인 한 공기분자의 벽면 미끄름 현상을 고려한 지배방정식을 Navier-Stokes방정식으로 부 터 유도하고 이를 2차원 유동의 경우까지 확대하여 극소틈새와 높은 압축성 계수를 갖 는 경우에 적용하고 그 결과를 기존의 수정된 레이노래즈 방정식의 해석결과와 비교하 고자 한다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권1호
• /
• pp.55-60
• /
• 2009

The present study investigated temperature and thermal stress distributions in a film cooling system with normal injection cooling flow. 3D-numerical simulations using the FEM commercial code ANSYS were conducted to calculate distributions of temperature and thermal stresses. In the simulations, the surface boundary conditions used the surface heat transfer coefficients and adiabatic wall temperature which were converted from the Sherwood numbers and impermeable wall effectiveness obtained from previous mass transfer experiments. As a result, the temperature gradients, in contrast to the adiabatic wall temperature, were generated by conduction between the hot and cold regions in the film cooling system. The gradient magnitudes were about 10~20K in the y-axis (spanwise) direction and about 50~60K in the x-axis (streamwise) direction. The high thermal stresses resulting from this temperature distribution appeared in the side regions of holes. These locations were similar to those of thermal cracks in actual gas turbines. Thus, this thermal analysis can apply to a thermal design of film cooling holes to prevent or reduce thermal stresses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.362-362
• /
• 2009

$MgB_2$ bulk samples were sintered at different ambient. In this work, high purity Ar gas was added with oxygen and hydrogen gas, which can be regarded as impurity in a sense, as a possible dopant in the $MgB_2$. It was found that oxygen in the sintering ambient leads to a decrease in the critical current density $J_c$ at self field and lower fields. However, we can obtained higher $J_c$ at higher fields. It was also noted that $MgB_2$ samples sintered with 5% hydrogen in Ar revealed the increased $J_c$ at all fields compared to those processed in pure Ar ambient. From the XRD and FESEM analysis, the impurity gas in Ar can refine the $MgB_2$ grain size and result in increased grain. boundary, which can act as a strong flux pinning sites in $MgB_2$ samples. Also discussed are the effects of sintering ambient on irreversibility field, $H_{irr}$ and the upper critical field, $H_{C2}$.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.330-340
• /
• 2005

Compressible two-phase flow is analyzed based on the arbitrary Lagrangian-Eulerian (ALE) formulation. For water, Tamman type stiffened equation of state is used. Numerical fluxes are calculated using the ALE two-phase Godunov scheme which assumes only that the speed of sound and pressure can be provided whenever density and internal energy are given. Effects of the approximations of a material interface speed are Investigated h method Is suggested to assign a rigid body boundary condition effectively To validate the developed code, several well-known problems are calculated and the results are compared with analytic or other numerical solutions including a single material Sod shock tube problem and a gas/water shock tube problem The code is applied to analyze the refraction and transmission of shock waves which are impacting on a water-gas interface from gas or water medium.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1201-1206
• /
• 2004

Sonoluminescence (SL) characteristics such as pulse shape, radiance and spectrum radiance from submicron bubbles were investigated. In this study, a set of analytical solutions of the Navier-Stokes equations for the gas inside bubble and equations obtained from mass, momentum and energy equations for the liquid layer adjacent the bubble wall were used to estimate the gas temperature and pressure at the collapse point, which are crucial parameters to determine the SL characteristics. Heat transfer inside the gas bubble as well as at the liquid boundary layer, which was not considered in the most of previous studies on the sonoluminescence was taken it into account in the calculation of the temperature distribution inside the bubble. It was found that bremsstrahlung is a very possible mechanism of the light emission from either micron or submicron bubbles. It was also found that the peak temperature exceeding $10^{6}$ K in the submicron bubble driven at 1 MHz and 4 atm may be due to the rapid change of the bubble wall acceleration near the collapse point rather than shock formation.