• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.339-342
• /
• 2003

Main PDP panel efficacy improvement factors are discussed. A large panel efficacy improvement can be obtained through a combination of discharge efficiency improvement and phosphor improvement. Important design elements are a high Xe-content gas mixture, the application of a $TiO_2-layer$, and a new green phosphor with little saturation at high VUV-load. In a 4-inch color test panel with a conventional stripe-type cell configuration a white efficacy of 4.4 lm/W and a luminance of 5000 $cd/m^2$ is obtained for sustaining at 250V in addressed condition.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.280-280
• /
• 2015

플라즈마 진단법 중 내부에 삽입하여 측정하는 단일 랭뮤어 탐침법은 플라즈마 특성을 정확하게 측정할 수 있다. 탐침에 (-)극을 걸어서 들어오는 전류를 통해서 이온포화 전류밀도를 측정할 수 있다. 본 연구에서는 유도결합플라즈마에 흐르는 가스와 압력에 따라서 변화를 확인하였다. $H_2$, Ar, $CF_4$ gas로 10 mTorr, 70 mTorr, $CF_4$ 주입위치의 조건으로 플라즈마 밀도를 구하였다.

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.642-649
• /
• 2018

The effect of gas sparging on sonochemical oxidation was investigated in a 300 kHz sonoreactor under various liquid height/volume conditions ($5{\sim}30{\lambda}$, 3.4 ~ 9.0 L), determined by the wavelength of the applied frequency. The electrical input power was maintained constant for all cases . Sonochemical activity drastically decreased from $15{\lambda}$ and the liquid height of $10{\lambda}$ was suggested as the optimal height for 300 kHz without gas sparging. In our previous research, the sonochemical activity observed was five-times higher when air sparging was applied for 36 kHz. On the other hand, no enhancement was obtained at 10, 15, 25 and $30{\lambda}$ using air sparging (1, 3, and 6 L/min) for 300 kHz in this study $20{\lambda}$ and optimization of gas sparging was conducted at $20{\lambda}$ using various gases including air, Ar, $O_2$, $N_2$, and mixtures of Ar and $O_2$. It was found that gas sparging using pure Ar or pure $O_2$ resulted in lower sonochemical activity compared to that of air sparging due to the imbalance between the intensity of cavitation phenomena and the generation of oxidizing radical species. Consequently, the gas mixture of $Ar:O_2$ = 80 % : 20 % (DO saturation ${\approx}100%$) was suggested as an optimal gas sparging condition.

• Geomechanics and Engineering
• /
• 제27권6호
• /
• pp.583-594
• /
• 2021

The gas permeability behavior of unsaturated bentonite-based materials is of major importance for ensuring effective sealing of high-level radwaste repositories. This study investigated this by taking a sample of Granular Bentonite Material (GBM) at the end of the Engineered Barrier Emplacement (EB) experiment in the Opalinus Clay, placing it under different humidity conditions until it achieved equilibration, and testing the change in the gas permeability under loading and unloading. Environmental humidity is shown to have a significant effect on the water content, saturation, porosity and dry density of GBM and to affect its gas permeability. Higher sensitivity to confining pressure is exhibited by samples equilibrated at higher relative humidity (RH). It should be noted that for the sample at RH=98%, when the confining pressure is raised from 1 MPa to 6 MPa, gas permeability can be reduced from 10^-16 m² to 10^-19 m², which is close to the requirements of gas tightness. Due to higher water content and easier compressibility, samples equilibrated under higher RH show greater irreversibility during the loading and unloading process. The effective gas permeability of highly saturated samples can be increased by 2-3 orders of magnitude after 105℃ drying. In addition, cracks possibly occurred during the dehydration and drying process will become the main channel for gas migration, which will greatly affect the sealing performance of GBM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.90-92
• /
• 2001

Carbon monoxide-sensing behavior of Pt-SiC Schottky diodes. fabricated on the same SiC substrate have been systematically compared and analyzed as a function of carbon monoxide concentrati on and temperature by I-V and ${\Delta}I$-t methods under steady-state and transient condition. Adsorption activation energies of Carbon monoxide on the surface of Pt-SiC Schottky diodes is investigated in a high temperature range ($100{\sim}500^{\circ}C$). The optimal temperature for behavior sensing is $300^{\circ}C$ and saturation concentration is 200 ppm.

• 대한치과의사협회지
• /
• 제14권9호
• /
• pp.733-737
• /
• 1976

The result were obtained as follow : 1. Formocresol produced the widest zone of inhibition and camphorated parachlorophenol was the next and engenol was the narrowest. 2. Formocresol revealed the most efficted forming ability of the volatile gas and camphorated parachlorophenol was the next and eugenol was the least. 3. In comparing with the weight per ml. of the tested medicaments, eugenol was 1039.99mg/ml. 4. The amount of saturation in filter paper disc camphorated parachlorophenol showed the most and eugenol showed the least.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.111-114
• /
• 2003

A new monitoring system has been developed for in-situ and realtime measurement of ozone transport in unsaturated porous media using a fiber optic sensor. The calibration of the fiber optic transflection dip probe (FOTDP) system was successfully carried out at various ozone concentrations using a column with length of 30 cm and diameter of 5 cm packed with glass beads, which don't react with gaseous ozone. The breakthrough curves (BTCs) of ozone was obtained by converting the normalized intensity into ozone concentration. The FOTDP system reflected the ideal transport phenomena of gas phase ozone at various flow rates. The FOTDP system worked well for in-situ monitoring of gas phase ozone at various water saturations and in presence of SOM. However, the FOTDP system did not measure the ozone concentration at more than 70% water saturation.

• 한국화재소방학회논문지
• /
• 제23권5호
• /
• pp.66-71
• /
• 2009

본 연구에서는 방염처리 단청목재에 대한 방염성능 및 연소가스를 분석하여 그 독성지수에 근거한 유독성을 평가하였다. 시료에 대한 방염처리방법과 시료처리의 환경조건은 방염성능에 크게 영향을 미치지 않았다. 연소가스의 발생량은 방염액을 분무도포한 시료들에서 거의 비슷한 발생량을 보였고 독성지수는 위험등급 III에 해당하는 높은 위험도를 나타내었고, 방염액을 가압함침시킨 시료가 상대적으로 낮은 위험도인 위험등급 II를 나타내었다.

• 한국산학기술학회논문지
• /
• 제5권4호
• /
• pp.354-358
• /
• 2004

본 논문은 HEMT소자의 전류-전압특성을 해석적으로 모델링한 것으로 n-AlGaAs층의 전자농도를 고려하여 Gauss법칙과 비선형 전하제어모델을 이용하여 2DEG의 전자농도를 구하였고, 채널을 부분적으로 2차원적으로 해석하여 포화전압을 도출하였고, 계산된 결과는 n-AlGaAs의 전자농도를 고려하지 않은 결과와 비교하였을 때 비교적 정확한 전류전압특성을 보이고 있다

• Environmental Engineering Research
• /
• 제10권2호
• /
• pp.71-78
• /
• 2005

A series of column experiments was conducted to develop a monitoring system for in-situ and realtime measurement of ozone transport in unsaturated porous media using a fiber optic sensor. The calibration of the fiber optic transflection dip probe (FOTDP) system was successfully carried out at various ozone concentrations using a column with length of 30 cm and diameter of 5 cm packed with glass beads, which don't react with gaseous ozone. The breakthrough curves (BTCs) of ozone were obtained by converting the normalized intensity into ozone concentration. The FOTDP system worked well for in-situ monitoring of gas phase ozone at various water saturations and in presence of soil organic matter (SOM). However, the FOTDP system did not measure the ozone concentration at more than 70% water saturation.