• 한국진공학회지
• /
• 제8권1호
• /
• pp.43-50
• /
• 1999

이온빔보조증착법으로 h-BN을 증착하여 이온에너지 및 기판온도에 따른 hexagonal ring의 배열 및 결정성의 변화를 연구하였다. 보론은 전자빔으로 1.5 $\AA$/sec 의 속도로 증발시켰으며, 질소는 둥-hall 형 이온건으로 60, 80, 100eV의 에너지로 공급하였다. 기판의 온도는 상온(no heating), 200, 400, 500, $800^{\circ}C$로 변화시켰다. 질소이온에너지가 증가할수록 hexagonal ring의 c축은 기판에 평행하게 배열하여 100 eV의 질소이온에너지에서 가장 좋은 배열을 나타내었다. 이는 이온에너지가 높을수록 합성 막에 큰 압축응력이 발생하기 때문으로 생각된다. 기판온도에 따라서는 온도가 증가함에 따라 배열이 증가하다가 약 $400^{\circ}C$에서 최대가 되고 그 보다 높은 온도에서는 배열이 감소하였다. 그리고 결정도는 온도가 증가할수록 향상되었다. 이러한 경향들은 온도가 증가함에 따라 원자 이동도는 증가하고 응력발생은 어려워지는 경향으로부터 잘 설명된다. 또한 nano-indentor로 측정한 h-BN막의 경도는 c-축의 배열정도와 같은 경향을 보였다. 이온빔보조증착법은 hexagonal ring의 배열을 통해 h-BN막 성질의 최적화에 효과적인 방법으로 판단된다.

• 한국재료학회지
• /
• 제7권1호
• /
• pp.76-80
• /
• 1997

용융탄산염 연료전지 분리판의 wet-seal부의 내식성 향상을 위한 NiAl 피복공정이 조사되었다. AlSl 316 스테인레스강위에 Ni과 Al를 순차적으로 피복한 후, $800^{\circ}C$에서 3시간 열처리하여 NiAl상이 형성됨을 확인할 수 있었다. NiAl상이 피복된 스테인레스강은 $650^{\circ}C$, 용융탄산염($62^{m}/_{o}Li_2CO_3-38^{m}/_{o}/K_{2}CO_{3}$)내에서 침지시험을 통해 내식성이 평가되었는데, AISI 316 스테인레스강에 비해 우수한 내식성을 보였다. 이는 표면에 치밀하게 형성된 AI 산화물층에 의한 것으로 판단되었다.

• 한국작물학회지
• /
• 제61권1호
• /
• pp.64-69
• /
• 2016

This study was conducted to develop a fast and efficient screening method to determine the quantity of fatty acid in peanut oil for high oleate breeding program. A total of 329 peanut samples were used in this study, 227 of which were considered in the calibration equation development and 102 were utilized for validation, using near infrared reflectance spectroscopy (NIRS). The NIRS equations for all the seven fatty acids had low standard error of calibration (SEC) values, while high R2 values of 0.983 and 0.991 were obtained for oleic and linoleic acids, respectively in the calibration equation. Furthermore, the predicted means of the two main fatty acids in the calibration equation were very similar to the means based on gas chromatography (GC) analysis, ranging from 36.7 to 77.1% for oleic acid and 7.1 to 42.7% for linoleic acid. Based on the standard error of prediction (SEP), bias values, and $R^2$ statistics, the NIRS fatty acid equations were accurately predicted the concentrations of oleic and linoleic acids of the validation sample set. These results suggest that NIRS equations of oleic and linoleic acid can be used as a rapid mass screening method for fatty acid content analysis in peanut breeding program.

• Journal of Crop Science and Biotechnology
• /
• 제10권1호
• /
• pp.13-18
• /
• 2007

Near-infrared spectroscopy(NIRS) was used as a rapid and nondestructive method to determine the fatty acid composition in intact seed samples of rapeseed(Brassica napus L.). A total of 349 samples(about 2 g of intact seeds) were scanned in the reflectance mode of a scanning monochromator, and the reference values for fatty acid composition were measured by gas-liquid chromatography. Calibration equations for individual fatty acids were developed using the regression method of modified partial least-squares with internal cross validation(n=249). The equations had low SECV(standard errors of cross-validation), and high $R^2$(coefficient of determination in calibration) values(>0.8) except for palmitic and eicosenoic acid. Prediction of an external validation set(n=100) showed significant correlation between reference values and NIRS estimated values based on the SEP(standard error of prediction), $r^2$(coefficient of determination in prediction), and the ratio of standard deviation(SD) of reference data to SEP. The models developed in this study had relatively higher values(> 3.0 and 0.9, respectively) of SD/SEP(C) and $r^2$ for oleic, linoleic, and erucic acid, characterizing those equations as having good quantitative information. The results indicated that NIRS could be used to rapidly determine the fatty acid composition in rapeseed seeds in the breeding programs for high quality rapeseed oil.

• 한국항공우주학회지
• /
• 제40권9호
• /
• pp.737-744
• /
• 2012

유한체적법을 이용하여 설정된 가상의 노즐 조건에 따라 비행체 배기플룸의 SE와 PE에 의한 열복사 저부가열 해석 연구를 수행하였다. 저부면에서의 복사열유속을 얻기 위해 배기플룸은 흡수, 방사 및 산란하는 매질을 고려하였다. 저부면은 차가운 흑체이고 비회색가스와 입자의 복사 물성치는 회색가스가중합법(WSGGM)을 사용하였다. 후방 몬테카를로 방법을 사용한 기존의 연구와 비교하여 검증한 후, 입자의 농도, 온도, 그리고 등방성 또는 이방성 산란에 따른 복사저부가열을 해석하였다. 그 결과, 복사열유속은 노즐 출구와의 거리가 멀어지거나 비행 고도가 증가할수록 감소하고 입자의 온도가 높아질수록 복사열유속은 증가한다. 또한 전방산란은 PE를 증가시키고 후방산란은 SE를 증가시켰다.

• 대한임상독성학회지
• /
• 제13권1호
• /
• pp.36-39
• /
• 2015

Copper sulfate is a copper compound used widely in the chemical and agriculture industries. Most intoxication occurs in developing countries of Southeast Asia particularly India, but rarely occurs in Western countries. The early symptoms of intoxication are nausea, vomiting, diarrhea, and abdominal cramps, and the most distinguishable clue is bluish vomiting. The clinical signs of copper sulfate intoxication can vary according to the amount ingested. A 75-year old man came to our emergency room because he had taken approximately 250 ml copper sulfate per oral. His Glasgow Coma Scale (GCS) score was 14 and vital signs were blood pressure 173/111 mmHg, pulse rate 24 bpm, respiration rate 24 bpm, and body temperature $36.1^{\circ}$ .... Arterial blood gas analysis (ABGa) showed mild hypoxemia and just improved after 2 L/min oxygen supply via nasal cannula. Other laboratory tests and chest CT scan showed no clinical significance. Three hours later, the patient's mental status showed sudden deterioration (GCS 11), and ABGa showed hypercarbia. He was arrested and his spontaneous circulation returned after 8 minutes CPR. However, 22 minutes later, he was arrested again and returned after 3 minutes CPR. The family did not want additional resuscitation, so that he died 5 hours after ED visit. In my knowledge, early deaths are the consequence of shock, while late mortality is related to renal and hepatic failure. However, as this case shows, consideration of early definite airway preservation is reasonable in a case of supposed copper sulfate intoxication, because the patients can show rapid deterioration even when serious clinical manifestation are not presented initially.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.94-102
• /
• 2015

Electro-coagulation experiments were conducted with aluminum (Al) or iron (Fe) electrode in order to determine the optimal electrode material and operation conditions for algae removal. Al electrode showed higher removal rate of algae than Fe electrode because Al flocs have positive surface charges which electrostatically attract algae species having negative surface charges. Removal rate of algae and total phosphorous (T-P) was increased as current density and electrode area increases. It was also found that initial pH with neutral range was optimum for T-P removal by electro-coagulation. Bench-scale continuous flow experiments consisted of electro-coagulation reactor, agitation tank and settling tank were conducted. In electro-coagulation reactor, a large fraction of Al flocs were distributed to scum layer, due to the gas bubbles generated by electrolysis reaction. In agitation tank, most of Al flocs were settled and the optimal mixing intensity was found to be 50 rpm to achieve good settleability. The removal rate of algae was about 90-95%. Additionally, the removal rate of the T-P and COD was observed to be $73.8{\pm}8.0%$ and $75.0{\pm}3.8%$, respectively. Meanwhile, the removal rate of total nitrogen (T-N) was relatively low at only 24%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.162-163
• /
• 2008

이 논문에서는 Polyimide 기판의 $O_2$ 플라즈마 처리효과에 따른 GZO 박막의 구조적, 전기적, 광학적인 특성을 고찰하였다. ICP-RIE 방법을 이용하여 Polyimide 기판의 $O_2$ 플라즈마 처리의 변수로 RF power와 처리시간을 각 100 ~ 400 W, 120 ~ 600 초까지 조절하였다. RF 스퍼터링 방법으로 $O_2$ 플라즈마 처리효과에 따른 Polyimide 기판을 4인치의 GZO(ZnO : 95 wt%, $Ga_2O_3$ 5 wt%) 타겟을 사용하여 RF power 90 W, 공정압력 5 mTorr, Ar gas 20 sccm, 기판거리 5 cm, 박막두께 500nm, 상온의 조건으로 GZO 박막을 증착 하였다. Polyimide 기판에 $O_2$ 플라즈마 처리를 하지 않고 증착한 GZO 박막의 비저황은 $1.02\times10^{-2}\Omega$-cm 이었고 RF power 100W, 처리시간 120 초로 $O_2$ 플라즈마 처리 후에 증착한 GZO 박막의 비저항이 $1.89\times10^{-3}\Omega$-cm인 최적의 값이 측정되었으며 RF power가 증가할수록 투과도는 감소하였지만 처리시간의 변화에 따라서는 투과도 변화가 거의 없었다.

• 한국환경보건학회지
• /
• 제40권3호
• /
• pp.178-186
• /
• 2014

Background: This study was conducted to assess health risks in regard to exposure by children to volatile organic compounds (VOCs) in children's products. Methods: Ten VOCs were measured by head-space gas chromatography in children's products, including toys, oil pastels, sign pens, furniture, ball pools, and playmats. We estimated the average daily dose (ADD) via inhalation during the use of these children's products and calculated hazard quotient (HQ) by dividing ADD by reference dose of VOCs. Results: Among the measured VOCs, five compounds were identified in children's products: benzene, ethylbenzene, styrene, toluene, and xylene. The detection rates of VOCs in toys, ball pools, furniture, playmats, sign pens, and oil pastels were 85%, 100%, 100%, 30%, 100%, and 60%, respectively. The maximum levels of VOCs were 0.18 mg benzene/kg in toys, 5.92 mg toluene/kg in playmats, 10.37 mg ethylbenzene/kg in ball pools, 24.85 mg xylene/kg in toys, and 118.29 mg styrene/kg in ball pools. From exposure levels of VOCs in the children's products HQs were calculated within a range of $5.71{\times}10^{-10}$ to $4.77{\times}10^{-4}$. The HQ of xylene was the highest for children aged 0-6 playing on the playmats. However, the HQ via inhalation exposure to VOCs in individual products did not exceed 1.00. Conclusion: Based on the results, it was concluded that the use of these children's products do not pose health risks to children.

• Journal of the Korean Data and Information Science Society
• /
• 제23권2호
• /
• pp.247-256
• /
• 2012

최근 온실가스 배출량에 대한 국제적 이슈가 지속적으로 대두되어 왔다. 본 연구는 이동 배출원중에서 도로교통부분에 대한 배출량을 산출하는데 필요한 연료소비량 산정에 관한 통계적인 기법들을 비교한 것이다. 지금까지 연료소비량을 산정하는데 단순히 연료공급량 또는 주행거리에 의한 방법으로 초점을 두어왔다. 그러나 연료공급량을 토대로 산출된 배출량은 다양한 차량 및 연식을 반영하지 못한다. 본 연구는 통계적 관점에서 주행거리와 연비를 조합한 각 차량의 연료소비량 및 모든 차량의 소비한 총연료소비량의 추정에 적용되는 방법들을 나열하고 비교한다. 또한 향후 연구로 제시된 일부 방법들에 대해서 차량 및 연식을 고려한 연료소비량의 추정에 관한 현실적인 적용방법을 제시한다.