• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.129-135
• /
• 2016

There have been many types of development and commercialization efforts for superconducting power applications with the continuous development of High Temperature Superconducting (HTS) conductors. In particular, HTS power cables are going to be commercialized in real power grids. A cryogenic refrigeration system should be used to keep it below 77 K, and its required cooling capacity continuously increases as the unit length of the HTS power cable increases. Among the many kinds of cryogenic refrigerator, a reverse Brayton refrigerator that uses turbo expanders is a promising refrigerator due to its efficiency and reliability. Among the various components in refrigerators, the cryogenic turbo-expander is the most important part for increasing efficiency and assuring reliability. The design of a 300 W class turbo-expander is described in this paper prior to the development of a 10 kW class turbo expander, which is the required capability for the commercialization of a HTS power cable. The impeller shape and rotation speed are determined based on the cycle analysis. The Eigen frequency and harmonic analysis are conducted with gas bearings at cryogenic temperatures to determine the operational stability.

• 대한기계학회논문집A
• /
• 제39권2호
• /
• pp.211-217
• /
• 2015

환경 문제 및 화석연료 고갈에 대한 관심으로 인하여 배기가스에 대한 규제는 나날이 엄격해지고 있으며 높은 연비에 대한 수요는 지속적으로 증가하고 있다. 이러한 시대적 요구를 뒷받침하기 위하여 저배기-고연비가 특징인 하이브리드 굴삭기가 현실적인 대안으로서 각광받고 있으며 지속적으로 연구되고 있다. 본 연구에서는 선회 구동 전동기, 엔진보조 전동기, 울트라 캐패시터, 전력변환장치를 중형 굴삭기에 탑재한 복합형 하이브리드 굴삭기를 개발하였으며, 일반적인 복합형 하이브리드 굴삭기의 연비개선요소(선회 구동 에너지 회생, 엔진 작동 속도 변경)외에 추가적으로 적용된 연비개선 방법론들에 대하여 다루고 있다. 본 방법론들을 적용함으로써 연비와 운전 조작성을 동시에 개선할 수 있었다.

• 에너지공학
• /
• 제5권1호
• /
• pp.50-55
• /
• 1996

상용 code인 Fluent를 이용하여 도자기의 1차 소성로에 대해 온도장과 속도장을 계산하고 열효율을 산출하였다. 수치해석의 변수로는 배출구 및 도자기의 위치를 변화시켰으며, 수치해석 방법은 검사체적에 기초한 유한차분방법 및 Upwind scheme과 SIMPLEC Algorithm을 사용하였고 난류모델로는 표준 k-$\varepsilon$ 모델을 사용하였다. 계산결과 출구 위치가 전체 소성로내 벡터유동의 양상을 크게 좌우하는 것으로 나타났으며, 전체 온도장에 대해서는 복사의 영향으로 큰 차이를 보이지 않았으나 예열대 상부에 출구가 있는 경우와 비교할 때 예열대 또는 냉각대의 측면에 출구가 있는 경우에 그 영역의 온도가 다소 높게 나타났다. 소성품의 위치는 로내 유동장 및 온도 분포에 크게 영향을 끼치지는 않으나 소성품 내 온도는 그 위치하는 영역의 온도 분포에 크게 영향을 받는 것으로 나타났다. 예열대 상부에 출구가 있는 경우 열효율은 17%로 매우 저조하였고 출구에서의 가스온도는 약 1000 K로 매우 높았다.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.189-195
• /
• 2000

RP techniques have their unique characteristics according to the working principles : star-stepped surface of parts due to layer-by-layer stacking low build speed caused by line-by-line solidification to fish one layer and post processing to improve surface finish etc The objective of this study is to propose a new RP technique Variable Deposition Mnanufacturing (VDM) which can make up for the disadvantages of the existing RP techniques and to develop an apparatus to implement the technique. The proposed process can greatly reduce the build time and improve the surface finish of parts generated. Experiments are carried out to obtain the range of temperature of molten material to maintain its fluidity and to investigate the effect of gas cooling on the preservation of the slopes. Some simple shapes such as a line-shape an S-shape and a circle-shape are fabricated from Ethylene Vinyl Acetatecopolymer(EVA) In order to examine the applicability of VDM to more general shapes a tensile specimen and a yo-yo shape were manufactured by the proposed RP method using EVA material as a trial approach. The current basic study shows a high potential of practical use of the proposed VDM process to prototyping of a general three-dimensional shape.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.25-29
• /
• 1976

The properties vary with quality of ferric-oxide that is major material of ferrites. In this point of view, a manufacturing method of pure and homogeneous fine ferric oxide is very important. The characters of this study are as follows: 1) Ferric oxide was made from waste pickling liquor of steel. 2) The crude ferric-oxide that is made by roasting the pickling liquor was dissolved in 20% HCI solution and then produced ferric chloride is purified by ethyl ether extraction. 3) The methanol solution of purified ferric chloride was sprayed into the refractory tube with compressed air and propane gas and then ignited leading to the ferric-oxide powder. 4) The produced oxide powder was introduced to the scrubber type vessel throught cooling system in order to collect the powder. 5) Crystalline phase of the powder was identified by X-ray diffraction and particle size, crystalline shape of the powder were investigated by settling method and electron microscope and the effects of concentration of ferric chloride in methanol on grain size were discussed. Results were obtained as fellows: 1) Total impurity in the ferric oxide produced from waste pickling liquor was 3.7%. 2) The solubilityof crude ferric oxide that was made from waste pickling liquor in HCI solution increased with the HCI concentration and reached to saturation range at 15% HCI concentration. 3) Extraction of FeCl3 increased with HCI concentration which is solvent. 4) Alpha ferric oxide obtained was very fine crystalline particles, the mean crystalline grain increased with the concentration of ferric chloride, and mean grain size distributed from 3.5$\mu$(at 0.5mole/l) to 0.5$\mu$(at 0.05mole/l).

• 한국대기환경학회지
• /
• 제22권2호
• /
• pp.249-257
• /
• 2006

In this work, the adsorptive and desorptive behavior of reduced sulfur compounds (RSC) was investigated using the combination of the Peltier cooling (PC)/thermal desorption (TD) unit with the gas chromatographic (GC) detection technique. To examine the adsorptive characteristics of RSC on clothing materials, a total of nine experiments were conducted in a stepwise manner. Once small towel pieces are exposed to significant quantities of RSC standards with high concentrations (10 ppm), the desoprtion stage was then induced by deloading RSC with ultrapure $N_2$ at three different flow rates (FR) of 20, 40, and 60 mL/min. At each FR, the total deloading volume of 400, 800, and 1,600 mL were maintained. These results were then compared in terms of odoring efficiency by dividing the total amount of desorption with the total amount used for exposition or RSC loading. The results indicated that desorption reaction of certain compounds ($CH_3SH$ and DMS) can be influenced significantly with the reducing FR, while they are not affected directly by the total deloading volume. In addition, when the extent of adsorption was compared for most S compounds by the odoring efficiency term, the extent of absorption generally occurred at approximately 1/1000 level of original exposition.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1817-1825
• /
• 2000

The purpose of this study is to examine the fracture toughness of the welded pipe from the viewpoint of FATT for the S38 and S42 steels used widely as the pipe material. Post weld heat treatment(PW HT) was carried out like following conditions: temperature of 67$0^{\circ}C$, I hour of holding time and cooling in furnace. Fracture toughness was obtained by measuring the crack opening displacement(COD) of the notched specimens over the range of temperature from -14$0^{\circ}C$ to -$25^{\circ}C$. Hardness values at fusion line near around were the highest and the microstructures at welded zone were coarsened. Regardless of the pipe materials, COD and temperature curves of the as-welds were moved toward higher temperature compared with those of the parents. However, COD and temperature curves of the PWHT specimens were positioned at lower temperature compared with those of the as-welds. The more heat input causes to decrease the COD values at the constant temperature. It was verified through the recrystallization treatment that PWHT was attributed to move toward lower temperature region considerably due to the improved plastic deformation at the same applied COD value of 0.3mm and softening effect. In case of the weldment of S38 steel, cleavage fracture was observed at -105$^{\circ}C$ unlike the structural steels, in which brittle fracture mode was generally shown at - 196$^{\circ}C$.

• 대한기계학회논문집B
• /
• 제39권10호
• /
• pp.773-778
• /
• 2015

가스터빈 냉각 장치인 블레이드 등과 같은 산업 설계를 개선하기 위해 사각 수축 및 확대채널에서 축방향의 거리에 따라 국부 난류 열전달과 압력강하에 대해 실험적으로 조사하였다. 수축 및 확대채널의 한 면에만 리브($10mm{\times}100mm{\times}5mm(t)$)를 연속적으로 배치하였고 충돌 각은 $90^{\circ}$로 피치(p)/높이(e)의 비는 10이 되도록 하였다. 수축채널의 수력직경비($D_{ho}/D_{hi}$)는 0.75, 확대채널의 수력직경비는 1.33 그리고 직선채널은 1.00이다. 열성능 비교를 위해 3가지 보편적인 제약 조건을 채택 하였다. 즉 동일 유량, 동일 펌프 동력 그리고 동일한 압력 강하이다. 3가지 조건모두 확대 채널에서 우수한 열 성능을 보였다.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.246-249
• /
• 2013

Nano-sized ${\beta}$-SiC nanoparticles were synthesized combined with a sol-gel process and a carbothermal process. TEOS and carbon black were used as starting materials for the silicon source and carbon source, respectively. $SiO_2$ nanoparticles were synthesized using a sol-gel technique (Stober process) combined with hydrolysis and condensation. The size of the particles could be controlled by manipulating the relative rates of the hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) within the micro-emulsion. The average particle size and morphology of synthesized silicon dioxide was about 100nm and spherical, respectively. The average particles size and morphology of the used carbon black powders was about 20nm and spherical, respectively. The molar ratio of silicon dioxide and carbon black was fixed to 1:3 in the preparation of each combination. $SiO_2$ and carbon black powders were mixed in ethanol and ball-milled for 12 h. After mixing, the slurries were dried at $80^{\circ}C$ in an oven. The dried powder mixtures were placed in alumina crucibles and synthesized in a tube furnace at $1400{\sim}1500^{\circ}C$ for 4 h with a heating rate of $10^{\circ}C$/min under flowing Ar gas (160 cc/min) and furnace cooling down to room temperature. SiC nanoparticles were characterized by XRD, TEM, and SAED. The XRD results showed that high purity beta silicon carbide with excellent crystallinity was synthesized. TEM revealed that the powders are spherical shape nanoparticles with diameters ranging from 15 to 30 nm with a narrow distribution.

• 한국항공우주학회지
• /
• 제31권5호
• /
• pp.87-92
• /
• 2003

일반적으로 연소과정에서 발생한 고온고압의 연소가스로 인하여 액체추진기관의 연소실 및 노즐 벽면 그리고 추진기관 후방부위에 대류열전달과 복사열전달이 발생하는 것으로 알려져 있으며, 액체추진기관에서 발생하는 복사열전달 현상은 재생냉각장치의 열입력랑 예측 및 발사체의 추진기관 후방부위에 탑재되는 전자장비 및 구조물의 열적 환경을 분석하는데 매우 중요하다. 이에 본 연구에서는 노즐 후방부위에서 발생하는 복사열전달량을 측정하고 연소압과 혼합비에 따른 영향을 파악하였다. 동알한 형상의 소형 액체추진기관에서 연소압(200, 300, 400 psi)과 혼합비(1.5, 2.0, 2.5)에 따른 복사열전달의 특성을 파악하기 위하여 각각 3가지 조건에 대하여 연소시험을 수행하여 복사열전달량을 측정하였다. 시험 결과로부터 연소가스에서 발생하는 복사열전달의 상대적인 크기 및 미치는 인자들을 파악할 수 있었다. 본 연구를 통하여 석영을 활용하여 복사하는 복사열전달의 크기 및 현상을 파악할 수 있었다. 또한, 연소실 및 노즐에서 발생하는 복사열전달 현상을 파악할 수 있었다