• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.56-62
• /
• 2008

A synthetic gas reformed from hydrocarbon-based fuels consists of $H_2$, CO and $N_2$. Hydrogen contained in the synthetic gas is a very useful species in chemical processes, due to its wide flammability range and fast burning speed. The ESGI (Exhaust Synthetic Gas Injection) technology is developed to shorten the light-off time of three way catalysts through combustion of the synthetic gas in the exhaust manifold during the cold start period of SI engines. Before the ESGI technology is applied to the test engine, the authors set a test rig that consists of gas temperature and composition controllers, an exhaust pulse generator and an exhaust manifold with a visualization window, in order to optimize the point and conditions of injection of the synthetic gas. Through measuring burned gas temperatures and taking photographs of synthetic gas combustion at the outlet of the exhaust manifold, the authors tried to find the optimal injection point and conditions. Analysis of burned gas composition has been performed for various $O_2$ concentrations. As a result, when the synthetic gas is injected at the port outlet of the cylinder No. 4 and $O_2$ concentration exceeds 4%, combustion of the synthetic gas is strong and effective in the exhaust manifold.

• Journal of Pharmacopuncture
• /
• v.11 no.3
• /
• pp.79-91
• /
• 2008

Objective: The purpose of this study was to investigate the composition for pharmacopunctures of eight principles hydrodistillation layer. Methods: The study was determined the hydrodistillation layer for pharmacopunctures of eight principles by hydrodistillation method. The effective components in hydrodistillation layer for pharmacopunctures of eight principles were extracted with ethyl ether or dichloromethane, and then analyzed by Gas Chromatography/Mass Spectrometry(GC/MS). Results: 1. Analyzed pharmacopunctures of eight principles by GC/MS, a lot of differences according to extraction solvent by each pharmacopunctures of eight principles and specific peak patterns were seen. 2. The main compound in pharmacopunctures of eight principles was a kind of hexaoxacyclohydrocarbon that has long hydrocarbon chain.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.122-127
• /
• 1963

Pyrolysis fo polyethylene and polypropylene has been studied in order to clarify the mechanism of chain scission and effect of oxygen on degradation. Rate of weight decrease was measured under nitrogen and air atmosphere at constant temperature for the samples of high density polyethylene, low density polyethylene and isotactic polypropylene, and then gaseous hydrocarbons produced from pyrolysis were analysed by gas chromatography. Although there is little substantial difference between composition of hydrocarbon gases from pyrolysis of high density polyethylene and low density polyethylene except some difference in quantity of total gas produced, gas composition from polypropylene pyrolysis differs from that of polyethylene pyrolysis. Gases from pyrolysis under air contain much more unsaturated hydrocarbons than those from pyrolysis under inert gas.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.181-185
• /
• 2008

The new concept for liquefaction of natural gas has been designed and simulated in this paper. Conventional liquefaction cycles are usually composed with Joule-Thomson valves at lower temperature refrigerant cycle. The new concept of natural gas liquefaction is discussed. The main difference with conventional liquefaction process is the presence of the turbine at low temperature of MR (mixed refrigerant) cycle. The turbine acts as expander but also as an energy generator. This generated energy is provided to the compressor which consumes energy to pressurize refrigerants. The composition of the mixed refrigerant is investigated in this study. Components of the refrigerant are methane, propane and nitrogen. Composition for new process is traced with Aspen HYSYS software. LNG heat exchangers are analyzed for the new process. Heating and cooling curves in heat exchangers were also analyzed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.2
• /
• pp.203-208
• /
• 2005

The aim of this experiment was to determine the chemical composition of six commonly utilized fodder trees and shrub species in Turkey, namely Glycrrhiza glabra L, Arbutus andrachne, Carpinus betilus, Juniperus communis, Quercus libari L and Pistica lentiscus and its relationship with gas production and estimated parameters when incubated with rumen fluid in vitro. There were significant (p<0.001) differences between leaves in terms of crude protein (CP), acid detergent fiber (ADF), total condensed tannin (TCT), bound condensed tannin (BCT) and soluble condensed tannin (SCT). Crude protein contents ranged from 5.74% (Juniperus communis) to 12.59% (Glycrrhiza glabra L). Acid detergent fiber contents ranged from 25.14% (Glycrrhiza glabra L) to 39.23% (Juniperus communis). Total condensed tannin (TCT) contents of leaves ranged from 4.34% (Quercus libari L) to 20.34% (Juniperus communis). Acid detergent fiber (ADF) and total condensed tannin contents of leaves were negatively correlated with gas productions and some estimated parameters. Potential gas productions (A) of Glycrrhiza glabra L, Arbutus andrachne, Quercus libari L and Pistica lentiscus were significantly (p<0.001) higher than those of Carpinus betilus and Juniperus communis whereas gas production rate (${\mu}_{24}$) of Pistica lentiscus was significantly (p<0.001) higher than the others. Time (h) to produce 50% of total gas pool size ($T_{50}$) of Juniperus communis was significantly (p<0.001) lower than that of Carpinus betilus whereas time (h) to produce 90% of total gas pool size ($T_{90}$) of Juniperus communis was significantly lower than the others except for Pistica lentiscus. The metabolizable energy (ME) contents of leaves ranged from 8.86 to 10.39 MJ $kg^{-1}$ DM. The results obtained in this study suggested that browse species had a significant effect on chemical composition, gas production and estimated parameters of leaves. Leaves from Glycrrhiza glabra L with a considerable amount of CP had a high rank value in terms of ME. Therefore leaves from Glycrrhiza glabra L may have a high potential value for small ruminant animals in terms of rumen and whole digestibility. Leaves from other species studied require protein supplementation when they are the only feed consumed by ruminant animals.

• Journal of the Korean Applied Science and Technology
• /
• v.4 no.1
• /
• pp.9-18
• /
• 1987

The effects of procedures for preparation of fatty acid methyl esters for gas chromatography were investigated. A quantitative comparison of four procedures for the preparation of the fatty acid methyl esters from Korean sesame seed lipids which can be representative of fatty acid ranges of Korean vegetable oils has been made. The procedures employed were $BF_3$-methanol, HCI-methanol, sodium methoxide-methanol, and tetramethylammonium hydroxide-methanol. Twelve fatty acids ranged from 14:0 to 24:0 were identified in the lipids from Korean white and black sesame seeds. All four procedures gave similar results for the fatty acids, 16:0, 18:0, 18:1, 18:2, and 18:3 present in the range of $1{\sim}44%$ but only in the HCI-methanol procedure, the fatty acids, 16:1, 20:0, 22:0, 24:0 present in the range of $0.02{\sim}1%$ showed the lowest values. When using tetramethylammonium hydroxide-methanol procedure for determination of total fatty acid composition from white and black sesame seed lipids, unsaponifiable matters including sesamol, sesamolin and sesamin present in the seed lipids are not removed from the resulting reaction mixture. Thus the transesterification mixture is used without further treatment for injection into the gas chromatography. However, the gas chromatographic analysis of the transesterification mixture showed that the unsaponifiable matters had no effect on the fatty acid composition of the seed lipids. From the results, it appears that the $BF_3$-methanol, sodium methoxide-methanol and tetramethylammonium hydroxide-methanol procedures can be used to prepare fatty acid methyl esters from Korean vegetable oils. Among the methods, the tetramethylammonium hydroxide-methanol procedure, which give total fatty acid composition, glyceride fatty acid composition and composition of free fatty acids present, appears to be a simple, convenient and quantitative procedure and applicable to samples containing broad ranges of fatty acids.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.7-14
• /
• 2001

In this work, the chemical composition of the exhaust gas from domestic gas boiler has been analysed in the point of thermodynamics and CO sensor has been characterized. We proposed that the combustion condition can be estimated by the exhaust gas composition, i.e., the excess air ratio and combustion temperature can be calculated simply by the measurement of the $O_{2}$ fraction and $H_{2}/CO$ in the exhaust gas. By analyse the on site situation domestic boiler, the excess air ratio is about $55\~110\%$. Therefore, the CO may be produced in domestic gas boiler by luminous(yellow) flames rapidly lose heat by radiation, turbulent flames may be partially quenched by the action of steep velocity gradients, and flames burning very close to a cold wall may be partial1y quenched by heat conductivity to the wall. The output voltage of CO sensor is lineally depend on the CO and $H_{2}$concentration. And the exhaust CO from boiler can be reduced by closed loop control with CO sensor

• Journal of the Korean Society of Combustion
• /
• v.15 no.1
• /
• pp.43-49
• /
• 2010

Co-combustion of syngas in an existing boiler can be one of the options for replacing conventional fossil fuel with alternative fuels such as waste and biomass. This study is aimed to investigate effects of syngas cocombustion on combustion characteristics and boiler efficiency. An experimental study was performed for a pilot-scale furnace with 4 oil burners. Tests were conducted with mixture-gas as a co-combustion fuel and heavy oil as a main fuel. The mixture-gas was composed of 15% CO, 7% $H_2$, 3% $CH_4$ and 75% $N_2$ for simulating syngas from air-blown gasification. And LHV of the mixture-gas was 890 kcal/$Nm^3$. Temperature distribution in the furnace and flue gas composition were measured for various heat replacement ratio by the mixture gas. Heat loss through the wall was also carried out through heat & mass balance calculation, in order to obtain informations related to boiler efficiency. Experimental results show that similar temperature distribution and flue gas composition can be obtained for the range of 0~20% heat replacement by syngas. NOx concentration is slightly decreased for higher heat replacement by the syngas because fuel NOx is decreased in the case. Meanwhile, heat loss is a bit decreased for higher heat replacement by the syngas, which implies that boiler efficiency can be a bit decreased when syngas co-combustion is applied to a boiler.

• Journal of Welding and Joining
• /
• v.25 no.4
• /
• pp.42-48
• /
• 2007

An inert gas atomized NiTiZrSiSn bulk metallic glass feedstock was sprayed onto the copper plate using vacuum plasma spraying process. In order to change the in-flight particle energy, that is, thermal energy, the hydrogen gas flow rate in plasma gas mixture was increased at the constant flow rate of argon gas. Coating and single pass spraying bead were produced with the least feeding rate. Regardless of the plasma gas composition, fully melted through unmelted particle could be observed on the overlay coating. However, the frequency of the unmelted particle number density was increased with the decrease of the hydrogen gas flow rate. The amorphous phase fraction within coating was also affected by the number density of the unmelted particle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.54-60
• /
• 2005

A study was conducted with the objective of evaluating the nutritive value of some browse species from Kenya. The species evaluated included: Bauhinia alba, Bauhinia variegata, Bridelia micrantha, Calliandra calothyrsus, Carisa edulis, Cratylia argentea, Gliricidia sepium, Lantana camara, Maerua angolensis, Sesbania micrantha and S. sesban. The browses were evaluated by their chemical composition including phenolics, in vitro gas production and tannin activity (tannin bioassay). All the species had high crude protein content (149-268 g/kg DM) and low NDF content (239-549 g/kg DM). The feeds had varying contents of total extractable tannins (TET) ranging from low (3-22 mg/g DM), moderate (42-58 mg/g DM) and high (77-152 mg/g DM). Calliandra calothyrsus had the highest tannin content. Significant (p<0.05) variation in gas production was recorded among the species. Sesbania micrantha had the highest (p<0.05) potential gas production while Gliricidia sepium had the highest (p<0.05) rate of gas production. Use of polyethylene glycol (PEG 6000), to assess the adverse affect of tannins, indicated that tannins in browse species with high tannin content had inhibitory effects on rumen microbial fermentation as indicated by the gas production. Estimated organic matter digestibility and metabolizable energy also increased with PEG addition. The results of this study indicate that such Kenyan browse species have the potential to be used as feed supplements for ruminant animals.