• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1339-1347
• /
• 2015

본 연구는 현장의 GMAW 용접기에 더블 와이어 릴을 겸비한 원격제어토치의 시스템에 관한 것이다. 산업현장 용접에서는 용접기 본체로부터 와이어 송급장치까지의 거리가 약 30m 떨어져 있고 송급장치로부터 토치까지의 거리는 약 3~5m 정도이다. 이에 따라 차량 및 탱크 내부의 용접에서 제어 패널을 볼 수 없는 곳이나 작업장이 먼 곳 등에서 용접사가 용접을 하면서 용접조건에 맞는 전류와 전압을 조절할 수가 없고 또한 용접와이어가 완전히 소모되면 용접을 중단하고 와이어 릴을 갈아 끼워야하는 번거로운 문제점이 있다. 이 때문에 전류와 전압 조절 및 와이어를 교체하기 위해 용접을 중단하고 잦은 이동으로 용접구조물의 순간적인 냉각에 의해 용접결함이 발생된다. 본 연구에서는 이러한 제반 문제를 감소하기 위해 기존의 GMAW 용접기의 제반기능을 토대로 간소화 및 합리화하여 더블 와이어 릴을 겸비한 원격제어토치를 자체 제작하였다. 실험은 SM50A 용접구조용 압연강재 6mm를 사용하여 와이어 더블 릴을 겸비한 원격제어 토치와 기존 $CO_2$ /MAG 용접토치를 V형 맞대기 수직자세로 용접을 실행하였다. 용접 완료 후 용접부의 표면비드 상태의 형상을 육안검사 관찰하고 또한 이를 방사선투과검사를 통해 용접부의 내부 용접품질에 대하여 용접현상을 분석하였다. 이 연구를 통해 용접결함 감소, 원가절감 및 기존 상용용접기에 교체사용에 대한 성능 및 호환성여부에 미치는 영향에 대해 평가하였다.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.88-93
• /
• 2009

While the pinch instability theory (PIT) has been widely employed to analyze the spray transfer mode in the gas metal arc welding (GMAW), it cannot predict the detaching drop size accurately. The PIT is modified in this work to increase the accuracy of prediction and to simulate the molten tip geometry to be more physically acceptable. Since the molten tip becomes a cone shape in the spray mode, the effective wire diameter is formulated that the effective diameter is inversely proportional to current square. Modifications are also made to consider the finite length of the liquid column and current leakage through the arc. While the effective diameter influences drop transfer significantly, the current leakage has negligible effects. The effects of modifications on drop transfer are analyzed, and the predicted drop diameters show good agreements with the experimental data of the steel wire.

• 한국정밀공학회지
• /
• 제32권2호
• /
• pp.209-217
• /
• 2015

Generally welding is one of the most important processes to have a strong influence on the quality and productivity from a manufacture-based industry such as shipbuilding, automotive and machinery. The GMA(Gas Metal Arc) welding process involves large number of interdependent welding parameters which may affect product quality, productivity and cost effectiveness. To solve such problems, mathematical models are required to select the welding parameters for GMA welding process. In this study, the GMA welding process was studied using the information generated during the welding. The statistical analysis of a generalized regression approach was conducted by the following three methods: Firstly using the mathematical model (linear regression, 2nd regression); Secondly GA(Genetic Algorithm) with intelligent models; And finally using response surface analysis of models to develop the relationships between welding parameters and bead width as welding quality.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.44-44
• /
• 2009

While the pinch instability theory (PIT) has been widely employed to analyze the spray transfer mode in the gas metal arc welding (GMAW), it cannot predict the detaching drop size accurately. The PIT is modified in this work to increase the accuracy of prediction and to simulate the molten tip geometry to be more physically acceptable. Since the molten tip becomes a cone shape in the spray mode, the effective wire diameter is formulated that the effective diameter is inversely proportional to current square. Modifications are also made to consider the finite length of the liquid column and current leakage through the arc. While the effective diameter influences drop transfer significantly, the current leakage has negligible effects. The effects of modifications on drop transfer are analyzed, and the predicted drop diameters show good agreements with the experimental data of the steel wire.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.21-25
• /
• 2016

The automotive vehicle is made through the following processes such as press shop, welding shop, paint shop, and general assembly. Among them, the most important process to determine the quality of the car body is the welding process. Generally, more than 400 pressed panels are welded to make BIW (Body In White) by using the RSW (Resistance Spot Welding) and GMAW (Gas Metal Arc Welding). Recently, as the needs of light-weight material due to the $CO_2$ emission issue and fuel efficiency, new joining technologies for aluminum, CFRP (Carbon Fiber Reinforced Plastic) and etc. are needed. Aluminum parts are assembled by the spot welding, clinching, and SPR (Self Piercing Rivet) and friction stir welding process. Structural adhesive boning is another main joining method for light-weight materials. For example, one piece aluminum shock absorber housing part is made by die casting process and is assembled with conventional steel part by SPR and adhesive bond. Another way to reduce the amount of the car body weight is to use AHSS (Advanced High Strength Steel) panel including hot stamping boron alloyed steel. As the new materials are introduced to car body joining, productivity and quality have become more critical. Productivity improvement technology and adaptive welding control are essential technology for the future manufacturing environment.