• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.833-840
• /
• 2021

This paper examines the effect of the interest rate set by Bank Indonesia on financial system stability as measured by the credit gap in Indonesia for quarterly data for the period 1976 Q1 to 2019 Q4. We suppose that the relationship between the Central Bank rate and the credit gap is non-linear. Hence, this study applies a smooth transition regression (STR) model to investigate the relationship between these variables. Our results are: first, by performing STR estimation we obtained a threshold level of Central Bank rate of 2.01. Second, a decrease in the Central Bank rate results in a reduction in the credit gap when the Central Bank rate is above or below the threshold level. The effect of the Central Bank rate is five times greater for the high regime than for the low regime. Third, we find evidence that the effect of the exchange rate, economic growth, inflation, and GDP per capita on the credit gap for the high regime is the opposite of the low regime. We suggest that policymakers need to keep the Central Bank interest rate low and stable so that the role of the bank as a financial intermediary remains stable and conducive to strengthening financial stability.

• Membrane and Water Treatment
• /
• 제13권1호
• /
• pp.51-62
• /
• 2022

Vacuum-assisted air gap membrane distillation (V-AGMD) has the potential to achieve higher flux and productivity than conventional air gap membrane distillation (AGMD). Nevertheless, there is not much information on technical aspects of V-AGMD operation. Accordingly, this study aims to analyze the effect of membrane deformation on flux in V-AGMD operation. Experiments were carried out using a bench-scale V-AGMD system. Statistical models were applied to understand the flux behaviors. Statistical models based on MLR, GNN, and MLFNN techniques were developed to describe the experimental data. Results showed that the flux increased by up to 4 times with the application of vacuum in V-AGMD compared with conventional AGMD. The flux in both AGMD and V-AGMD is affected by the difference between the air gap pressure and the saturation pressure of water vapor, but their dependences were different. In V-AGMD, the membranes were found to be deformed due to the vacuum pressure because they were not fully supported by the spacer. As a result, the deformation reduced the effective air gap width. Nevertheless, the rejection and LEP were not changed even if the deformation occurred. The flux behaviors in V-AGMD were successfully interpreted by the GNN and MLFNN models. According to the model calculations, the relative impact of the membrane deformation ranges from 10.3% to 16.1%.

• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.194-201
• /
• 2010

본 논문에서는 CDMA/RFID 주파수 격리도 향상을 위해 double split ring resonator(DSRR)을 이용한 주파수 선택적 표면(FSS)을 설계하였다. 제안된 FSS의 단위 셀 구조는 외부 SRR과 내부 SRR로 구성되며, 이 두 SRR의 gap은 같은 방향에 위치한다. SRR의 gap 간격 및 line 두께 등을 조절하여 전체적인 크기를 유지하면서 공진 주파수 및 스커트 특성을 조절할 수 있다. 동작 주파수에서 제안된 SRR의 필드는 magneto-dielectric SRR과 다른 방향을 가진다. 한 층은 $9{\times}9$ 단위 셀로 구성되어 있으며, 50 mm 간격을 두고 다른 층이 위치해 있다. 시뮬레이션 결과를 검증하기 위해 패치 안테나 및 FSS를 제작했으며, 측정 결과는 시뮬레이션 결과와 유사한 경향을 보인다. 단위 셀의 저지 대역에서의 전기적 크기는 $0.110\;{\lambda}{\times}0.110\;{\lambda}{\times}0.002\;{\lambda}$로 다이폴 FSS에 비해 소형이며, 지지대를 포함한 2층 FSS의 크기는 $1.058\;{\lambda}{\times}1.058\;{\lambda}{\times}0.153\;{\lambda}$이다. 측정 결과 CDMA 대역의 이득이 유지되며, RFID 대역에서 6.9 dB 이득이 감소하였다.

• 한국재료학회지
• /
• 제3권2호
• /
• pp.121-130
• /
• 1993

합성용질확산법으로 GaP 단결정을 성장시키고, 몇가지 성질을 조사하였다. 결정성장용 석영관을 전기로내에서 1.75mm/day의 속도로 하강시킴으로써 양질의 GaP 단결정을 성장하였다. 에치피트 밀도는 결정의 성장축 방향으로 3.8 ${\times}{10^4}$c$m^{-2}$부터 2.3 ${\times}{10^5}$c$m^2$이었다. 에너지갭의 온도의존성은 실험적으로 $E_g$(T)=[2.3383-(6.082${\times}{10^{-4}}$)$T^2$(373.096+T)eV로 구하여졌다. 저온에서의 광루미네센스 스펙트럼은 구속된 여기자의 복사재결합과 재결합 과정에 포논의 참여로 인하여 에너지갭 부근의 복잡한 선 스펙트럼이 나타났다. n형의 GaP내에서 Zn의 확산깊이는 확산시간의 제곱근에 비례하였으며, 확산계수의 온도의존성은 D(T)=3.2${\times}{10^3}$ exp(-3.486/KbTc$m^2$/sec이었다. p-nGaP 동종접합다이오드의 전기루미제센스 스펙트럼은 깊은 준위의 도너인 Zn-O 복합중심(complex center)과 Zn가 형성한 역셉터 준위사이의 도너-억셉터 쌍 재결합 천이에 의한 630nm의 발광과 에너지갭 부근의 케리어 재결합 처이에 의한 550nm의 발광으로 구성되었으며, 100mA보다 낮은 전류 영역에서 광자의 방출은 bane-filling 과정으로 이루어 진다.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.67-70
• /
• 2003

Hard disk drives (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. Laser sheet and digital camera was used for 2-dimensional visualization of the unsteady flow between the center pair of two co-rotating disks in air with a cylindrical enclosure (or shroud). Geometric parameters are gap height (H) between disks, and gap distance (G) between disk tip and shroud. The lobe-structured boundary between inner region and outer region was detected by inserted particles, and the number of dominant vortices was determined clearly It is found from flow visualization that the number of vortex cells can be correlated with Reynolds number based on H which is defined as $Re_H={\Omega}RH/v$ ranging from $3.18\times10^3\;to\;1.43\times10^4$, and decreases as the disk speed increases. The lobe pattern by vortex cells is changed to a circular pattern for the wide gap than narrow one.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.61.1-61.1
• /
• 2011

We report on a detailed study on gap-state distribution in thin amorphous silicon layers(a-Si:H) with film thickness between 5 nm and 20 nm c-Si wafers performed by UV excited photoelectron spectroscopy(UV-PES). We measured how the work function, the gap state density, the position of the Fermi-level and the Urbch-energy depend on the layer thickness and the doping level of the ultra thin a-Si:H(n) layer. It was found, that for phosphorous doping the position of the Fermi level saturates at $E_F-E_V$=1.47 eV. This is achieved at a gas phase concentration of 10000 ppm $PH_3$ in the $SiH_4/H_2$ mixture which was used for the PECVD deposition process. The variation of the doping level from 0 to 20000 ppm $PH_3$ addition results in an increase of the Urbach energy from 65 meV to 101 meV and in an increase of the gap state density at midgap($E_i-E_V$=0.86eV) from $3{\times}10^{18}$ to $2{\times}1019cm^{-3}eV^{-1}$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1661-1665
• /
• 2004

Hard disk drives (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. Laser sheet and digital camera was used for 2-dimensional visualization of the unsteady flow between co-rotating disks in air with a cylindrical enclosure (or shroud). Geometric parameters are gap height (H) between disks, and gap distance (G) between disk tip and shroud. The lobe-structured boundary between inner region and outer region was detected by inserted particles, and the number of dominant vortices was determined clearly It is found from flow visualization that the number of vortex cells can be correlated with Reynolds number based on H which is defined as $Re_H={\Omega}RH/v$ ranging from $7.96{\times}10^2$ to $1.43{\times}10^4$, and decreases as the disk speed increases. The lobe pattern by vortex cells is changed to a circular pattern for the wide gap than narrow one.

• 한국전자파학회논문지
• /
• 제27권10호
• /
• pp.945-948
• /
• 2016

최근 프리미엄급 스마트폰들은 대부분 메탈 프레임을 채용하고 있으며, 이는 중저가 스마트폰으로 확산되고 있는 추세이다. 하지만, 메탈 프레임은 스마트폰 내 디지털 부품에서 발생하는 전자파 노이즈의 좋은 전달 경로가 되어, 스마트폰 상단부 또는 하단부에 위치한 무선 안테나에 전자파 간섭을 일으키는 원인이 될 수 있다. 본 논문에서는 메탈 프레임에 EBG(Electromagnetic Band Gap) 구조를 적용하여 안테나로의 전자파 간섭을 줄일 수 있는 방법을 제안하였다. $7{\times}6$ 배열의 다중 비아(Multi-via) EBG 구조를 갖는 메탈 프레임을 설계하였으며, 이를 적용할 경우, 메탈 프레임을 통한 표면 전자파 노이즈 간섭을 20 dB 정도 저감시킬 수 있음을 시뮬레이션을 통해 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.754-759
• /
• 2004

We have studied the fringe field switching (FFS) mode with the positive dielectric anisotropy for the fast response time. The factors such as the physical properties of the LC, the cell gap, and the rubbing angle were critical for the fast response time of the FFS mode. The response time became 10 ms faster when the rotational viscosity of the new LC is 20 mPa.s lower than the conventional LC. When the cell gap changed from 3.6 ${\mu}{\textrm}{m}$ to 3.0 ${\mu}{\textrm}{m}$, it was possible to achieve the total response time and response times associated with grey-to-grey transitions under 16 ms. And the response times including grey-to-grey transitions become fast as the rubbing angle decreases.