• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.789-801
• /
• 1995

Canals with artificially made internal resorption were filled with 4 techniques(Lateral condensation, Ultrafil, Obtura II, Thermafil) to compare the efficacy of canal filling according to the filling techniques. After canal filling, radiographic examination, dye penetration through the apical portion and percentage of G-P filled area on the internal resorption area were evaluated. To examine the degree of crystal-like structure and the interface between filled G-P and canal wall, SM and SEM images were taken too. The results were as follows : 1. There was no statistically significant difference in apical microleakage among the 4 root canal filling techniques. 2. As a result of radiographic examination, Ultrafil was the best and Obtura II was acceptable but Lateral condensation and Thermafil showed unfavorable canal filling pattern similarly. 3. Ultrafil filled most of artificially made internal resorption area and Obtura II, Lateral condensation, Thermafil in that order filled unfavorably. 4. Degree of crystal like structure was the highest in the group filled with Ultrafil and those of Obtura II and Thermafil were similar and that of gutta percha used in Lateral condensation showed the lowest value. 5. Penetration of gutta percha into the dentinal tubules couldn't be seen in all groups. In the contact surface between the filled G-P and the canal wall, Lateral condensation showed relatively close sealing, Obtura II and Thermafil had irregular contact surface and Ultrafil showed regular filling pattern. 6. Contact surface between the core of Thermafil and the gutta percha showed close relationship without gap formation.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.59-66
• /
• 2006

In laser welding, automatic seam tracking is important to adjust the laser head position in real time as it moves along the seam. Also if the joint gap is occurred, filling the missing material into the joint gap is necessary to prevent welding defects and bad welding quality. In general, the joint gap width is not constant along the seam due to a variety of reason. So it is essential to control the filler wire speed into the joint gap to acquire good welding quality. This paper describes an intelligent filler wire feeding device which can control 3-dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. We call this device as Smart Micro Control system(SMC). To achieve this objective, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the developed device. From the experimental results, It was found the possibility that the developed device could be used in welding various 3-dimensional structures.

• 대한원격탐사학회지
• /
• 제36권6_1호
• /
• pp.1407-1419
• /
• 2020

지구환경 변화를 파악하는 데 있어서는 장기 시계열의 격자자료가 필수적이며, 기후 재분석장과 위성자료는 대기 및 지표면 변수에 대하여 전 지구 규모에서 주기적이고 정량적인 정보로 활용되고 있다. 본 연구에서는 위성자료의 결측 문제를 해결하기 위한 방안으로 DCT-PLS (penalized least square regression based on discrete cosine transform) 기반의 결측복원 기법을 서로 다른 특성을 가진 복수의 격자자료에 적용하고, 정량적인 검증을 통하여 그 활용성을 평가하였다. 원본 자료와의 객관적인 비교를 위하여 결측이 없는 LDAPS (Local Data Assimilation and Prediction System) 모델로부터 상대습도, 풍속 일자료를 추출하고, MODIS (Moderate Resolution Imaging Spectroradiometer)의 월간 합성 LST (land surface temperature), NDVI (normalized difference vegetation index) 영상을 사용하여, 임의로 생성된 결측 블록이 원본에 매우 가깝게 복원됨을 확인하였고, 4가지 변수 모두에서 상관계수 0.95 이상의 일치도를 나타내었다. DCT-PLS 기반 결측복원 기법은 별도의 보조자료를 필요로 하지 않고, 필요시 시간 및 공간 정보를 모두 활용할 수 있으며, 처리속도가 비교적 빠르기 때문에 현업시스템에 사용될 수 있을 것으로 사료된다.

• Journal of Welding and Joining
• /
• 제2권1호
• /
• pp.58-65
• /
• 1984

NGW(Narrow Gap Welding)는 개선폭이 약 9mm로서 연강 및 저탄소강을 용접할 경우 두께가 300mm까지 1층으로 용접이 가능하다. 따라서 두께가 두꺼운 발전설비, 원자력 설비, 화학 설비 등의 압력용기의 용접에 적합한 용접법이다. 그러나 실제적인 NGW의 적용은 제작자의 친근 감의 결여, 기술 부족 및 복잡성 등의 이유로 아직도 비교적 널리 활용되지 않고 있다. 새로운 type의 GMAW-NG process가 발전되어 오고 잇다. 위와 같은 장점과 단점을 비교해 볼 때 낮은 operating 경비, 높은 joint filling rate, 변형과 잔류 응력의 감소 등으로 세계적인 용접 전 문가들의 계속적인 관심도가 높아지고 사용도도 증가하고 있다. narrow gap welding의 장단점을 요약하면 아래와 같다. 장 점 1) 생산성이 높다. 2) 고품질을 얻을 수 있다. 3) 잔류 응력과 변형을 적게 한다. 4) 전자세 용접이 가능하다. 단 점 1) 용접기의 가격이 비싸다. 2) 용접 품질에 큰 영향을 주는 아아크가 작업 조건에 따라 민감하게 변한다. 3) repair procedure는 다른 용접 방법을 요구한다. 4) 과도한 복잡성 때문에 장비의 신뢰성이 낮다.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2011년도 학술발표회
• /
• pp.44-44
• /
• 2011

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.553-562
• /
• 2020

S 밴드, C 밴드 그리고 X 밴드 레이더는 기상 관측을 목적으로 사용되고 있다. 기상청, 환경부, 공군은 부처별 관측 목적에 따라 레이더를 운용하고 있기 때문에 설치 지점과 관측 특성이 서로 다르다. 기상 관측 관점에서는 지리산과 태백산 인근의 산악 지형을 따라 고도 1 km 이하의 저층 관측의 한계 지역이 나타난다. 소형 레이더 설치를 가정하여 저층 관측 보완을 모의하였다. 또한, 북한 지역의 위험 기상 감시를 위해 북한의 강수를 분석하고 대형 레이더 관측망을 모의하였다. 종합하여 한반도 레이더 관측망 구축안을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.626-629
• /
• 2006

Suk-San highway bridge, located on a soft ground environment, had been examined the current condition of settlement estimation throughout G.P.R(Ground Penetrating Radar), general observation and visual observation(video camera & scope). According to the above observations, the ground of this area has sunk about thirty centimeters since 1996. Also, currently, Suk-San highway bridge has been disjoining the gap between the structure and ground. Therefore, it is necessary to fill it up the gap. The purpose of this paper is to report the effects of Sunk-San highway bridge was observed by G.P.R. & general observation etc. and to present the results of repair of Suk-San highway bridge filling the gap up.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.30-34
• /
• 2003

For an inhomogeneous superconductor, we reveal a relation of an observed superconducting gap, $\Delta$$_{obs}$ and the intrinsic true gap, $\Delta$$_{i}$, $\Delta$$_{obs}$(equation omitted) where band filling, 0＜$\rho$<$\leq$1. $\Delta$$_{obs}$ is the effect of measurement when 0＜$\rho$＜1. The true gap is observed only when $\rho$=1. Parring symmetry analyzed by a coherence-peak shape of density of states, observed in B $i_2$S $r_2$CaC $u_2$ $O_{8}$＋$\chi$ superconductors, is s- wave.X> $O_{8}$＋$\chi$ superconductors, is s- wave. wave.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.53-61
• /
• 1997

The performance characteristics of magnetic fluid seals are studied numerically as a function of working gap, pole width, angle of pole sharpening, and shaft speed. The temperature distribution of a magnetic fluid seal with multiple tooth is investigated as a function of the contact fraction of magnetic fluids at the periphery of pole tooth using a finite element method. The most significant design parameter of a magnetic fluid seal is the working gap between the pole pieces and the rotating shaft. The result shows that with increasing the working gap, the friction torque decreases radically. The practical working gap for the pole pieces with triangular tooth zone profile is 0.2-0.4mm. The FEM results indicate that the optimal filling of a magnetic fluid between the pole pieces and the shaft is very important due to the accumulations of nonuniform friction heating within the pole pieces, which may interfere the magnetic circuit flow.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.509-522
• /
• 2022

Tail-grouting is an effective measure in shield engineering for filling the gap at the shield tail to reduce ground deformation. However, the gap-filling ratio affects the value of the gap parameters, leading to different surface settlements. It is impossible to adjust the fill ratio indiscriminately to study its effect, because the allowable adjustment range of the grouting quantity is limited to ensure construction site safety. In this study, taking the shield tunnel section between Chaoyanggang Station and Shilihe Station of Beijing Metro Line 17 as an example, the correlation between the tail-grouting parameter and the surface settlement is investigated and the optimal grouting quantity is evaluated. This site is suitable for conducting field tests to reduce the tail-grouting quantity of shield tunneling over a large range. In addition, the shield tunneling under different grouting parameters was simulated. Furthermore, we analyzed the evolution law of the surface settlement under different grouting parameters and obtained the difference in the settlement parameters for each construction stage. The results obtained indicate that the characteristics of the grout affect the development of the surface settlement. Therefore, reducing the setting time or increasing the initial strength of the grout could effectively suppress the development of surface subsidence. As the fill ratio decreases, the loose zone of the soil above the tunnel expands, and the soil deformation is easily transmitted to the surface. Meanwhile, owing to insufficient grout support, the lateral pressure on the tunnel segments is significantly reduced, and the segment moves considerably after being removed from the shield tail.