• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.75-85
• /
• 2017

A method to estimate hourly temperature profiles on calm and clear nights was developed based on temporal changes of inversion height and strength. A meteorological temperature profiler (Model MTP5H, Kipp and Zonen) was installed on the rooftop of the Highland Agriculture Research Institute, located in Daegwallyeong-myeon, Pyeongchang-gun, Gangwon-do. The hourly vertical distribution of air temperature was measured up to 600 m at intervals of 50 m from May 2007 to March 2008. Temperature and relative humidity data loggers (HOBO U23 Pro v2, Onset Computer Corporation, USA) were installed in the Jungdae-ri Valley, located between Gurye-gun, Jeollanam-do and Gwangyang-si, Jeollanam-do. These loggers were used to archive measurements of weather data 1.5 m above the surface from October 3, 2014, to November 23, 2015. The inversion strength was determined using the difference between the temperature at the inversion height, which is the highest temperature in the profile, and the temperature at 100 m from the surface. Empirical equations for the changes of inversion height and strength were derived to express the development of temperature inversion on calm and clear nights. To estimate air temperature near the ground on a slope exposed to crops, the equation's parameters were modified using temperature distribution of the mountain slope obtained from the data loggers. Estimated hourly temperatures using the method were compared with observed temperatures at 19 weather sites located within three watersheds in the southern Jiri-mountain in 2015. The mean error (ME) and root mean square error (RMSE) of the hourly temperatures were $-0.69^{\circ}C$ and $1.61^{\circ}C$, respectively. Hourly temperatures were often underestimated from 2000 to 0100 LST the next day. When temperatures were estimated at 0600 LST using the existing model, ME and RMSE were $-0.86^{\circ}C$ and $1.72^{\circ}C$, respectively. The method proposed in this study resulted in a smaller error, e.g., ME of $-0.12^{\circ}C$ and RMSE of $1.34^{\circ}C$. The method could be improved further taking into account various weather conditions, which could reduce the estimation error.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.431-438
• /
• 2014

This study was conducted to assess forest biomass resource which is a carbon sink and a renewable resource in Korea. The total forest biomass resource potential was 804 million tons, and conifers, broadleaved forest and mixed forest accounted for 265 million tons, 282 million tons, and 257 million tons, respectively. Proportionately to regional forest stocks, biomass potential of Gangwon-do had most biomass potential, followed by Gyeongsangbuk-do and Gyeongsangnam-do. The woody biomass from the byproduct of sawn timber in commercial harvesting was 707 thousand ton/year, and that from the byproduct of forest tending was 592 thousand ton/year. The amount resulted in about 1,300 thousand ton/year of potential supplies from forest biomass resource into the energy market. It's tonnage of oil equivalent(toe) was 585 thousand ton/year. In this study, we developed a program (BiomassMap V2.0) for forest biomass resource mapping. Used system to develop this program was Microsoft Office Excel, Microsoft Office Access ArcGIS and Microsoft Visual Basic 6.0. Additionally, This program made use of tool such as ESRI MapObjects2.1 in order to take advantage of spatial information. This program shows the map of total biomass stock, annual biomass growth at forest land in Korea, and biomass production from forest tending and commercial harvesting. The information can also be managed by the program. The biomass resource map can be identified by regional and forest type for the purpose of utilization. So, we expect the map and program to be very useful for forest managers in the near future.

• Korean Journal of Environmental Biology
• /
• v.38 no.4
• /
• pp.733-743
• /
• 2020

We estimated the carbon storage of coal mines reclaimed using Betula platyphylla (BP), Pinus koraiensis (PK), and Pinus spp. (PS, Pinus densiflora, Pinus rigida, and Pinus thunbergii). The carbon storage of tree biomass (TB), forest floor(FF), mineral soil (MS), and the total forest were quantified. Reclaimed sites were located in Gangwon-do, Gyeongsangbuk-do, and Jeollanam-do; reclamation was conducted at various times in each region. The carbon storage (ton C ha^-1) in FF (BP: 3.31±0.59, PK: 3.60±0.93, PS: 4.65±0.92), MS (BP: 28.62±2.86, PK: 22.26±5.72, PS: 19.95±3.90), and the total forest(BP: 54.81±7.22, PK: 47.29±8.97, PS: 45.50±6.31) were lower than that of natural forests (NF). The carbon storage in TB was lower in BP (22.57±6.18) compared to NF, while those in PK(21.17±8.76) and PS (20.80±6.40) were higher than in NF. While there were no significant differences in the carbon storage of TB, FF, and the total forest among tree species, results from MS showed a significant difference among species. TB and the total forest carbon storages in all sites increased after reclamation. Soil pH and cation exchange capacity values in BP and PS were lower than in NF. Amounts of labile carbon, available phosphate, and microbial biomass carbon in reclaimed sites were less than half of NF. There are a number of methods that could increase the reclamation efficiency. Applications of lime or organic fertilizers, as well as tillage operations, may improve soil properties in reclaimed coal mines. Additionally, pruning and thinning would increase tree growth thereby increasing carbon storage.

• Journal of Ginseng Culture
• /
• v.5
• /
• pp.52-76
• /
• 2023

This article focuses on changes in the ginseng industry in the 1930s in areas other than the Government Contract Cultivation (GCC) zones. A major characteristic of the ginseng industry in the 1930s was the rapid increase in the area covered by ginseng gardens: the area was about 212 ha in 1929 and 252 ha in 1930 and 1931 but soared to around 441 ha in 1938. This occurred because the non-GCC areas increased significantly during this period. Until the early 1930s, the ratio of GCC to non-GCC areas was 70:30. By the late 1930s, however, the ratio had changed to 53:47. The reason for this change was that the area of the newly established ginseng gardens in the GCC zones had decreased, while that of the non-GCC ginseng gardens had steadily increased. Due to the Japanese invasion of China, China boycotted red ginseng, and exports were sluggish, so the GCC areas were reduced. On the other hand, the non-GCC ginseng gardens were not affected, and the area they covered steadily increased. As a result, in the 1930s, the ginseng industry outside of the GCC areas grew rapidly. The region that led the growth of the ginseng industry outside of the GCC zone was Jeonbuk. By the late 1930s, Jeonbuk dominated the other provinces and accounted for more than 50% of the non-GCC farming zone. Gyeongbuk and Gangwon-do followed Jeonbuk in terms of ginseng cultivation areas. While Gyeonggi-do, Gyeongnam, and Chungbuk were also active in ginseng cultivation, Jeonnam and Chungnam were not active. In the 1930s, the growth of the ginseng industry outside of the GCC zones was driven by the efforts of ginseng farmers and the support of local governments. An examination of Yecheon-gun in Gyeongbuk, Ganghwa-gun in Gyeonggi, and Jecheon-gun in Chungcheongbuk-do showed that ginseng farmers organized cooperatives as the ginseng industry steadily developed in these regions, and these cooperatives worked systematically to cultivate and sell ginseng. In the case of Ganghwa-gun, activities were carried out to incorporate the GCC zone. The Deoksan Ginseng Association in Jecheon-gun determined that financing for cultivation was key and requested subsidies from the provincial government. Administrative authorities also supported the activities of the ginseng farmers. The activities of the farmers and the support of the administrative authorities together led to the growth of the ginseng industry during this period.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.69 no.1
• /
• pp.49-60
• /
• 2024

A region can be divided into cultivation zones based on homogeneity in weather variables that have the greatest influence on crop growth and yield. This study classified the cultivation zone of soybean using weather indices as a prior study to classify the agroclimatic zone of soybean. Meteorological factors affecting soybeans were determined through correlation analysis over a 10 year period (from 2013 to 2022) using data from the Miryang and Suwon regions collected from the soybean yield trial database of the Rural Development Administration, Korea and the meteorological database of the Korea Meteorological Administration. The correlation between growth characteristics and the minimum temperature, daily temperature range, and precipitation were high during the vegetative growth stages. Moreover, the correlation between yield components and the maximum temperature, daily temperature range, and precipitation were high during the reproductive growth stages. As a result of k-means clustering, soybean cultivation zones were divided into three zones. Zone 1 was the central inland region and southern Gyeonggi-do; Zone 2 was the southern part of the west coast, the southern part of the east coast, and the South Sea; and Zone 3 included parts of eastern Gyeonggi-do, Gangwon-do, and areas with high altitudes. Zone 1, which has a wide latitude range, was further subdivided into three cultivation zones. The results of this study may provide useful information for estimating agrometeorological characteristics and predicting the success of soybean cultivation in South Korea.

• Journal of Forest and Environmental Science
• /
• v.20 no.1
• /
• pp.93-109
• /
• 2004

To provide the basic informations related to forest road construction of mountainous terrain, we analyzed changes of the road structure factors such as banking and cutting slope gradients, slope length, road width by the environmental factors such as locations, slope gradients, soil types, road position on physically stabilized forest roads constructed in Gangwon-do. All factors related to the road structures by locations were significant except for banking slope length. Road width, longitudinal gradients, banking and cutting slope length by slope gradients were not significantly different and banking slope gradients in the range less than $30^{\circ}$, from $30^{\circ}$ to $35^{\circ}$ and more than $40^{\circ}$ and cutting slope gradients were significantly different for all areas. Road width, longitudinal gradients, banking slope length by soil types were not significantly different and others were significantly different. All factors related to the road structures by road position were significant except for cutting slope gradients.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.664-669
• /
• 2010

The forest area of domestic is 6370304 ha, which covers 70% of the whole country, and especially Gangwon-do is remarkably larger than other Province. A thick forest of the country has the most basic component among other natural environments as well as it has invaluable worth to human being such as scientific research and educational value. However due to the breakout of forest fire since 1990s, the loss of trees, destruction of natural environment and ecology, economic damage have been occurring and its scale also has become larger. The causes of becoming larger in scale are resulted from forest components which mainly consist of needle leaf trees, wide leaf trees, fallen leaves, herbaceous plants so that it has been a direct cause for forest fire. However, few research on combustion and pyrolysis characteristics has been done in domestic and abroad. The study on the combustion and pyrolysis for Pinus densiflora which are typical needle leaf trees has been tried using TGA. Pinus desiflora started to being ignited at around $162^{\circ}C$ and pyrolysis was done at around $197^{\circ}C$. Differential method was applied to calculate activation energy and frequency factor according to the variation of conversion. Activation energy in pyrolysis was increased from 79 kJ/mol to 487 kJ/mol with increasing conversion and average activation energy was 195 kJ/mol. The activation energy in combustion was decreased from 148 kJ/mol to 133 kJ/mol.

• Journal of the Korean Geographical Society
• /
• v.47 no.5
• /
• pp.654-676
• /
• 2012

This study aims to develop an ecoregion classification using a multi-hierarchy of environmental factors for spatial patterns in the capacities and potentials of ecological systems in mountain regions. To achieve the objectives, we describe the spatial distribution of environmental factors and identify the multi-hierarchy of these factors using spatial statistics. Lastly, we assess ecosystem-units using both a forest type map (yung & kung) and a forest soil map in order to present a ecoregion classification. This study was performed at a $1,168km^2$ area in Gangwon-do, Korea. Sedimentary rocks, particularly limestone (36.6%) exist in high proportions in the research area. While higher mountains are present in the north and central Korean peninsula, plain areas show large proportions along Odae and Pyeongchang river. In a multi-hierarchy, geology and elevation are identified as upper levels and landform classification (surface curvature, upslope area) is considered as a lower level. 'Geology+elevation+landform' shows equally higher ${\chi}^2$ values than that of other classifications and we map ecoregions based on this result. Uniqueness of environmental characteristics in the research area such as high proportions of sedimentary rocks and higher elevations influences our ecoregion classification. We are looking forward to considering this study as an effective approach to integrating various ecological themes for mountain ecosystem management.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.4
• /
• pp.457-463
• /
• 2014

Ultrasound measurements of backfat thickness (UBF), longissimus muscle area (ULMA) and marbling score (UMS) and carcass measurements of carcass weight (CW), backfat thickness (BF), longissimus muscle area (LMA), and marbling score (MS) on 7,044 Hanwoo steers were analyzed to estimate genetic parameters. Data from Hanwoo steers that were raised, finished in Hoengseong-gun, Gangwon-do (province) and shipped to slaughter houses during the period from October 2010 to April 2013 were evaluated. Ultrasound measurements were taken at approximately three months before slaughter by an experienced operator using a B-mode real-time ultrasound device (HS-2000, FHK Co. Ltd., Tokyo, Japan) with a 3.5 MHz linear probe. Ultrasound scanning was on the left side between 13th rib and the first lumbar vertebrae. All slaughtering processes and carcass evaluations were performed in accordance with the guidelines of beef grading system of Korea. To estimate genetic parameters, multiple trait animal models were applied. Fixed effects included in the models were: the effects of farm, contemporary group effects (year-season at the time of ultrasound scanning in the models for UBF, ULMA, and UMS, and year-season at slaughter in the models for CW, BF, LMA, and MS), the effects of ultrasound technicians as class variables and the effects of the age in days at ultrasound scanning or at slaughtering as linear covariates, respectively for ultrasound and carcass measures. Heritability estimates obtained from our analyses were 0.37 for UBF, 0.13 for ULMA, 0.27 for UMS, 0.44 for CW, 0.33 for BF, 0.36 for LMA and 0.54 MS, respectively. Genetic correlations were strongly positive between corresponding traits of ultrasound and carcass measures. Genetic correlation coefficient between UBF and BF estimate was 0.938, between ULMA and LMA was 0.767 and between UMS and MS was 0.925. These results suggest that ultrasound measurement traits are genetically similar to carcass measurement traits.

• Korean Journal of Veterinary Service
• /
• v.43 no.3
• /
• pp.139-145
• /
• 2020

This study was carried out to identify the occurrence of transovarian transmitted diseases and antibody positive rates among Korean native breeder chickens. The infection rates with Salmonella pullorum and Salmonella gallinarum among 16-week-old, 36-week-old, and 56-week-old breeder chickens and the antibody positive rates to Egg Drop Syndrome '76, Mycoplasma gallisepticum and Mycoplasma synoviae among 16-week-old, 18-week-old, and 56-week-old breeder chickens were identified, and the antibody positive rates to seven major transovarian transmitted diseases among 1-day-old chicks were investigated. As a result, no infection with Salmonella pullorum and Salmonella gallinarum was found among the investigated subjects of all ages. Vaccinated breeder chickens showed the 100% antibody positive rate to Egg Drop Syndrome '76, and unvaccinated breeder chickens showed the 100% antibody negative rate to Mycoplasma gallisepticum and Mycoplasma synoviae, confirming that there was no infection with Mycoplasma gallisepticum and Mycoplasma synoviae. As a result of the antibody tests of the 1-day-old chicks for transovarian transmitted diseases, it was found that vaccinated chicks showed good antibody positive rates to avian encephalomyelitis, chicken infectious anemia, and avian reovirus, confirming that they had power of defense against the relevant infectious diseases, and that unvaccinated chicks showed the 100% antibody negative rates to avian leukosis, chicken reticuloendotheliosis, and Mycoplasma synoviae, confirming that there was no infection with the relevant diseases. Given that the results of this study showed that among the transovarian transmitted diseases of chickens, there was no history of infection with diseases against which vaccination was not administered and high antibody positive rates were found with diseases against which vaccination was administered, it is judged that chickens with good power of defense against diseases were bred, and it is deemed that constant monitoring and vaccination against transovarian transmitted diseases will be necessary for the control and prevention of the diseases.