• Korean Journal of Microbiology
• /
• v.20 no.3
• /
• pp.119-124
• /
• 1982

As a basic study to elucidate nutritional physiology and composition of synthetic medium of red rotting bacteria, Erwinia carotovora, of ginseng, the effects of hydrogen ion concentration, various kinds of carbon sources, nitrogen source, micrometallic salts and it's concentration on the gorwth of the bacteria were investigated and the results were as follows. Optimal pH in the basal medium for the growth of the bacteria was 6.5. After incubation the pH in culture media was neutralized. Among the various kinds of carbon sources, sucrose, glucose mannitol, but organic acids were not utilized effectively as nutrients. After incubation the pH turned acidic. Alanine as organic nitrogen sources nad ammonium sulfate as inorganic nitrogen promoted the growth, but L-valine and sodium nitrite were the least effective. Ferric chloride 1.0mg/dl and ferrous sulfate 100mg/dl were the most effective as micrometallic sources. Control and boric acid were the least effective. New synthetic medium based on the above results was follows ; Alanine 1.0g, $KH_2PO_4\;1.0g, \;sucrose\;30.0g, \;MgSo_4{\cdot}7H_2O\;0.5g, \;FeCl_3{\cdot}6H_2O\;1.0mg\;thiamine\;200{\gamma}g$, and distilled water 1000ml, pH6.5.

• Korean Journal of Microbiology
• /
• v.13 no.1
• /
• pp.37-44
• /
• 1975

As a basic study to elucidate nutritional physiology and composition of synthetic medium of red rotting bacteria, Erwinia carotovora, of ginseng, the effects of hydrogen ion concentration, various kinds of carbon sources, nitrogen source, micrometallic salts and it's concentration on the gorwth of the bacteria were investigated and the results were as follows. Optimal pH in the basal medium for the growth of the bacteria was 6.5. After incubation the pH in culture media was neutralized. Among the various kinds of carbon sources, sucrose, glucose mannitol, but organic acids were not utilized effectively as nutrients. After incubation the pH turned acidic. Alanine as organic nitrogen sources nad ammonium sulfate as inorganic nitrogen promoted the growth, but L-valine and sodium nitrite were the least effective. Ferric chloride 1.0mg/dl and ferrous sulfate 100mg/dl were the most effective as micrometallic sources. Control and boric acid were the least effective. New synthetic medium based on the above results was follows ; Alanine 1.0g, $KH_2PO_4$ 1.0g, sucrose 30.0g, $MgSo_4$ $7H_2$O 0.5g, $FeCl_36H_2$O 1.0mg thiamine 200.gamma.g, and distilled water 1000ml, pH6.5.

• Journal of Nutrition and Health
• /
• v.35 no.3
• /
• pp.368-379
• /
• 2002

This study investigated the correlations among the health consciousness, nutrition knowledge, dietary habits and nutrition attitudes of school teachers. The subjects of this study were 75 male and 152 female leachers in elementary and middle schools in Masan city. The survey was conducted by using a questionnaire. Even though the average body mass index (BMI) and the obesity index were normal in both male and female subjects, 33.3% of the male subjects were overweight/obese, while 18.5% of the female subjects were underweight, according to the obesity index. The food components of most concern during mealtime were (in order of importance) salt, MSG and cholesterol by male subjects, and salt, fat and MSG by female subjects. The subjects considered self-relaxation as the most important factor in maintaining optimal health status, followed by resting, bathing or use ova sauna, moderation in diet, exercise, decreasing alcohol intake, and no smoking. Newspapers/magazines and TV/radio were the primary sources of nutrition and health information of the subjects. As the degree of health consciousness increased, scores of the dietary habits and nutrition attitudes increased. Nutrition knowledge scores and nutrition altitudes scores increased with subjects'increased level of perception of the importance of acquiring nutrition knowledge and nutrition information. There was a highly significant correlation between the degree of health consciousness and dietary habit score (${\gamma}$ : 0.3, p<0.001). The degree of health consciousness was also significantly correlated (${\gamma}$=0.6, p<0.001) with nutrition attitudes scores. But the correlation between the degree of health consciousness and nutrition knowledge was not statistically significant. The degree of the perception of the importance of nutrition knowledge showed a positive correlation with nutrition attitude (${\gamma}$:0.4, p<0.001) and dietary habit (${\gamma}$:0.3, p<0.001). The degree of perception about the importance of nutrition knowledge and nutrition information was positively correlated with nutrition knowledge (${\gamma}$:0.2, p<0.001) and nutrition attitudes (${\gamma}$:0.3, p<0.001).

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.16-19
• /
• 2003

Ni thin films on the p-InP (In) substrates were grown at room temperature by using the ion beam-assisted deposition. In order to determine the work function of the Ni thin films, the $\gamma$values were measured as functions of the acceleration voltages by using Ne, Ar, $N_2$. and Xe ion sources. The dependences of the values on various gases and on the acceleration voltages of the focused ion beam were obtained to determine the work function of the Ni thin films. The value of the work function of the Ni thin films grown on the p-InP (100) substrate was 5.8 eV ~ 5.85 eV. These results provide important information on the electronic properties of Ni thin films grown on p-InP (100) substrates at room temperature.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1259-1265
• /
• 2020

A beta ray scanner was proposed for in-situ discrimination of beta and gamma ray radioactivity. This scanner is based on the principle that gamma and beta rays experience different changes in detection efficiency in scintillators with different geometries, especially with regard to the scintillator thickness. The ratios of the counting rates of gamma rays (R_gamma), beta rays (R_beta), and sample measurements (R_total) in a thick scintillator to those in a thin one are reported. The parameter X_thick, which represents the counting rate contributed by beta rays to the total counting rate in the thick scintillator, was derived as a function of those ratios. The values of R_gamma and R_beta for ⁶⁰Co and ⁹⁰Sr sources were estimated as 3.2 ± 0.057 and 0.99 ± 0.0049, respectively. The estimated beta ray contributions had relative standard deviations of 2.05-4.96%. The estimated range of the beta rays emitted from ⁹⁰Sr was 19 mm as per the Monte Carlo N-Particle simulation, and this value was experimentally verified. Homogeneous and surface contaminations of ⁶⁰Co and ⁹⁰Sr-⁹⁰Y were simulated for application of the proposed method. The counting rate contributed by the beta rays was derived and found to be proportional to the concentration of ⁹⁰Sr-⁹⁰Y contamination.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.125-130
• /
• 2011

The purpose of this study was to evaluate the protective effect of the Perilla frutescens cv. Chookyoupjaso mutant water extract (PFWE) on gamma ray-induced oxidative stress in mice. Gamma-ray is one of the sources for inducing oxidative stress. The study was divided into 6 groups with 6 mice for each treatment. Groups I and II were treated with saline (vehicle) only, groups III, IV, V, and VI were pretreated with PFWE 10, 20, 50, $50mg\;kg^{-1}$ respectively for 2 weeks before gamma radiation. And then groups II, III, IV, V were irradiated. We found that the activities of aspartate transaminase (AST) and alanine transaminase (ALT) were increased and the activities of antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx), and glutathione reductase (GR) were decreased by irradiation in mice. However, treatment of PFWE attenuated the activities of AST and ALT in a dose-dependent manner in irradiated mice. Furthermore, treatment of PFWE significantly increased the activities of SOD, GPx, and GR in a dose-dependent manner in irradiated mice, except for the CAT. Interestingly, the activities of GPx and GR were significantly increased by PFWE treatment. Taken together, PFWE could be effective in protecting on gamma ray-induced oxidative stress in mice.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.2
• /
• pp.146-151
• /
• 2005

Some distributions have been used for diagnosing the lead time demand distribution in inventory system. In this paper, we describe the negative binomial distribution as a suitable demand distribution for a specific retail inventory management application. We here assume that customer order sizes are described by the Poisson distribution with the random parameter following a gamma distribution. This implies in turn that the negative binomial distribution is obtained by mixing the mean of the Poisson distribution with a gamma distribution. The purpose of this paper is to give an interpretation of the negative binomial demand process by considering the sources of variability in the unknown Poisson parameter. Such variability comes from the unknown demand rate and the unknown lead time interval.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.2
• /
• pp.101-104
• /
• 2016

More than 100 γ−ray pulsars have been discovered by the Fermi Gamma-ray Space Telescope. With a significantly enlarged sample size, it is possible to compare the properties of different classes. Radio-quiet (RQ) γ−ray pulsars form a distinct population, and various studies have shown that the properties of the RQ population can be intrinsically different from those of radio-loud (RL) pulsars. Utilizing these differences, it is possible to further classify the pulsar-like unidentified γ−ray sources into sub-groups. In this study, we suggest the possibility of distinguishing RQ/RL pulsars by their spectral shape. We compute the probabilities of a pulsar to be RQ or RL for a given spectral curvature. This can provide a key to the estimation of the intrinsic fraction of radio-quietness in the γ−ray pulsar population, which can place a tight constraint on the emission geometry.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.11
• /
• pp.894-901
• /
• 1991

Contact-type linear image sensors have been fabricated by means of RF glow discharge decomposition method of silane and hydrogen mixtures. The dependences of the electrical and optical properties of these sensor on thickness, RF power, substrate temperature and ambient gas pressure have been investigated. the ITO/i-a-Si:H/Al structure film shows photosensitivity of 0.85 and photocurrent to dark current ratio ($I_{ph}/I_{d}$) of 150 at 5V bias voltage under 200${\mu}W/cm^[2}$ red light intensity. Under 200${\mu}W/cm^[2}$ green light intensity, the ratio is 100. In order to investigate photocarrier transport mechanism and to obtain ${\mu}{\gamma}$ product we have measured the I-V characteristics of these sensors favricated with several different deposition parameters under various light sources. The linear inage sensor for document reading has been operated under reverse bias condition with green light source, resulting in ${\mu}{\gamma}$ product of about 1.5$[\times}10^{-9}cm^{2}$/V.