• Journal of the Korean Ceramic Society
• /
• v.36 no.3
• /
• pp.293-300
• /
• 1999

고주파 마그네트론 스퍼터법을 이용한 YIG(yttrium iron garnet)박막 제조시 기판유형, 기판온도, 스퍼터전력, 스퍼터가스 등의 증착변수와 증착후 열처리 조건이 YIG 박막의 결정성, 화학조성, 미세구조 그리고 자기적 특성에 미치는 영향에 대하여 고찰하였다. 75$0^{\circ}C$ 이상의 온도에서 수행한 증착후 열처리에 의하여 비정질 박막이 결정화되었으며, 특히 GGG(gadolinium gallium garnet)기판 위에 제조된 박막은 강한 (111)우선배향성을 나타냈다. 박막조성은 스퍼터가스 내의 산소분율에 민감하게 영향을 받았으며, 산소분율이 20%인 스퍼터가스를 사용하여 제조된 박막은 Y2.88Fe3.84O12의 조성을 나타내었다. 증착후 열처리 온도가 90$0^{\circ}C$로부터 110$0^{\circ}C$로 증가함에 따라, GGG 기판위의 박막의 표면거칠기는 2.5nm에서 40nm로 증가하였으며, 보자력과 강자성 공명 선폭은 감소하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.3
• /
• pp.143-145
• /
• 2016

In order to find suitable source and drain (S/D) electrodes for amorphous InGaZnO thin film transistors (a-IGZO TFTs), the specific contact resistance of interface between the channel layers and various S/D electrodes, such as Ti/Au, a-IZO and multilayer of a-IGZO/Ag/a-IGZO, was investigated using the transmission line model. The a-IGZO TFTs with a-IGZO/Ag/a-IGZO of S/D electrodes had good performance and low contact resistance due to the homo-junction with channel layer. The stability was measured with different electrodes by a positive bias stress test. The result shows the a-IGZO TFTs with a-IGZO/Ag/a-IGZO electrodes were more stable than other devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.137-137
• /
• 2009

Indium Gallium Zinc Oxide (IGZO) thin films for TFT channel were prepared by using a Facing Target Sputtering (FTS) system. To investigate the effect of oxygen on the optical and the electrical properties of amorphous InGaZnO(a-IGZO), we prepared thin films by FTS system in various oxygen atmospheres at room temperature. As-deposited IZTO thin films were investigated by using a UV/VIS spectrometer, an X-ray diffractometer, a Hall Effect measurement system, and an atomic force microscope. The quantitative analysis of the films was carried out by using the energy dispersive X-ray (EDX) technique for the as-deposited film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.8-8
• /
• 2009

Thin-film transistors (TFTs) were fabricated using amorphous indium gallium zinc oxide (a-IGZO) channels by rf-magnetron sputtering at room temperature. We have studied the effect of oxygen partial pressure on the threshold voltage($V_{th}$) of a-IGZO TFTs. Interestingly, the $V_{th}$ value of the oxide TFTs are slightly shifted in the positive direction due to increasing $O_2$ ratio from 1.2 to 1.8%. The device performance is significantly affected by varying $O_2$ ratio, which is closely related with oxygen vacancies provide the needed free carriers for electrical conduction.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.158-160
• /
• 2008

A highly linear and efficient GaN HEMT Doherty amplifier for wideband code division multiple access (WCDMA) repeaters is presented. For better performance, the adaptive gate bias control of the peaking amplifier using the power tracking circuit and the shunt capacitors is employed. The measured one-carrier WCDMA results show an adjacent channel leakage ratio of -43.2 dBc at ${\pm}2.5$-MHz offset with a power added efficiency of 40.1% at an average output power of 37 dBm, which is a 7.5 dB back-off power from the saturated output power.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1741-1744
• /
• 2013

A new polymeric catalyst was prepared by supporting $GaCl_3$ on cross-linked polyvinylpyrrolidone ($GaCl_3$/PVP). This catalyst was employed for efficient and regioselective ring-opening reaction of epoxides by various alcohols under solvent-free conditions at room temperature. In our procedure, this heterogeneous catalyst was used at neutral and mild reaction conditions to afford high yields of ${\beta}$-alkoxy alcohols. Also, regioselective conversion of epoxides to ${\beta}$-azidohydrines was accomplished by sodium azide in MeOH in the presence of $GaCl_3$/PVP at room temperature. $GaCl_3$/PVP is a non-hygroscopic and recoverable catalyst and is easily separated from reaction mixture by a simple filtration and re-used repeatedly. Also, this catalyst has good handling and can be stored for long time without any reducing of its reactivity.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.594-600
• /
• 2014

A threshold voltage compensation pixel circuit was developed for active-matrix organic light emitting diodes (AMOLEDs) using amorphous indium-gallium-zinc-oxide thin-film transistors (a-IGZO-TFTs). Oxide TFTs are n-channel TFTs; therefore, we developed a circuit for the n-channel TFT characteristics. The proposed pixel circuit was verified and proved by circuit analysis and circuit simulations. The proposed circuit was able to compensate for the threshold voltage variations of the drive TFT in AMOLEDs. The error rate of the OLED current for a threshold voltage change of 3 V was as low as 1.5%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.305.2-305.2
• /
• 2016

Tin monosulfide (SnS) is one promising candidate absorber material which replace the current technology based on cadmium telluride (CdTe) and copper indium gallium sulfide selenide (CIGS) for its suitable optical band gap, high absorption coefficient, earth-abundant, non-toxic and cost-effective. During past years work, thin film solar cells based on SnS films had been improved to 4.36% certified efficiency. In this study, Tin monosul fide was obtained by atomic layer deposition (ALD) using the reaction of Tetrakis (dimethylamino) tin (TDMASn, [(CH3)2N]4Sn) and hydrogen sulfide (H2S) at low temperatures (100 to 200 oC). The direct optical band gap and strong optical absorption of SnS films were observed throughout the Ultraviolet visible spectroscopy (UV VIS), and the properties of SnS films were analyzed by sanning Electron Microscope (SEM) and X-Ray Diffraction (XRD).

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.192-193
• /
• 2013

본 논문에서는 WBG(Wide Band Gap)특성을 갖는 GaN FET의 과도특성을 분석한다. 먼저, GaN(Gallium Nitride) FET의 공개된 정보를 바탕으로 스위칭 과도 특성과 관련된 파라미터들을 정량적으로 추출하고, GaN FET의 동특성을 반영하는 시뮬레이션 모델을 구성한다. 이 모델을 통하여 Si MOSFET과 비교하여 GaN FET의 성능을 예측한다.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.190-191
• /
• 2013

본 논문에서는 기존의 Si MOSFET을 사용한 전력시스템과 비교하여 WBG(Wide Band Gap)특성을 갖는 GaN(Gallium Nitride) FET을 사용한 전력시스템을 비교 분석한다. 대표성을 갖는 평가가 가능하도록 가장 일반적인 FB 구조를 대상으로 Si MOSFET과 GaN FET을 각각 적용하고, 다양한 기준 조건에서 효율과 전력 밀도 등 성능을 비교한다. 전체 과정은 수학적 계산 및 시뮬레이션으로 검증한다.