• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.56-64
• /
• 2015

This study presents a model-based gain scheduling strategy for PI-based EGR controllers. The air-to-fuel ratio is used as an indirect measurement of the EGR rate. In order to cope with the nonlinearity and parameter varying characteristics of the EGR system, we proposed a static gain model of the EGR system using a new scheduling parameter. With the 810 steady-state measurements, the static gain model achieved 0.94 of R-squared value. Based on the static gain of the EGR system, the PI gains were robustly designed using quantitative feedback theory. Consequently, the gains of the PI controller are scheduled according to the static gain parameter of the EGR path in runtime. The proposed model-based gain scheduling strategy was validated through various operating conditions of engine experiments such as setpoint step responses and disturbance rejections.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권1호
• /
• pp.30-38
• /
• 2004

This paper deals with a problem of automatic landing guidance and control ofthe longitudinal airplane motion under the wind shear turbulence. Adaptive gainscheduled PID control law is proposed in this paper. Fuzzy logic is the main part ofthe adaptive PID controller as gain scheduler. To illustrate the successful applicationof the proposed control law to the automatic landing control problem, numericalsimulation is carried out based on the longitudinal nonlinear airplane model excited bythe wind shear turbulence. The simulation results show that the automatic landingmaneuver is successfully achieved with the satisfactory performance and the gainadaptation of the control law is made adequately within the limited gains.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1051-1059
• /
• 1992

Two types of digital repetitive control systems are analyzed and designed to reduce the error spectrum including not only harmonic but also non-harmonic components. First, a novel gain scheduling algorithm is suggested for conventional and modified repetitive controller is scheduled to reduce the infinite norm of error in frequency domain. For this, the relative error transfer function is mewly defined as the ratio of the error spectrum for the system with a repetitive controller to the error spectrum for the system with a repetitive controller to the error spectrum for the system without a repetitive controller. Secondly, as an alternative of a repetitive control system with the gain scheduling, a repetitive control system with higher order repetitve function is analyzed and designed, where instead of equal weightings, weightings of the higher order repetitive function is determined in such a way that the infinite norm of relative error transfer function is minimized. To show the validities of proposed methods, computer simulation results are illustrated for a typical disk drive head positioning servo system.

• 대한기계학회논문집A
• /
• 제38권1호
• /
• pp.1-9
• /
• 2014

로터에 작용하는 불균형한 반복 하중은 풍력발전기에 구조적 하중을 발생시키고 이러한 하중이 구조물에 지속적으로 누적되면 피로 파괴와 수명 단축을 발생시킨다. Individual pitch control(IPC)는 이러한 구조적 하중을 저감시키고 풍력발전기의 작동 수명 연장에 효과가 있는 제어 방법이다. 본 연구에서는 Decentralized LQR(DLQR)과 Disturbance accommodating control(DAC)를 이용한 IPC 설계를 제시한다. DLQR은 로터 회전속도 제어를 위해 사용하였고 DAC는 블레이드에 외란으로 작용하는 바람(난류) 효과를 상쇄하도록 구성하였다. 제시된 IPC제어기의 구조적 하중 저감 효과는 Gain-scheduled PI로 설계된 Collective pitch control(CPC)과 비교하여 확인하였다. 또한, IPC의 구조물 하중 저감 효과를 확인하기 위해 피로 누적에 의한 손상정도를 나타내는 피로등가하중(DEL)을 이용하였다.

• 한국추진공학회지
• /
• 제20권1호
• /
• pp.28-36
• /
• 2016

본 논문에서는 핀틀을 이용한 가변추력 고체 추진기관의 추력을 제어하기 위하여 이론적으로 모델을 구하고 압력 제어기를 설계하였다. 고전적인 모델 선형화 및 비례-적분제어를 설계했을 때 실제 모델의 비선형성에 의해 발생하는 제어기 성능 저하를 줄이기 위해 이득 계획 기법을 적용하였다. 시스템의 특징을 고려하여 연소관 내부 체적 변화에 따라 이득을 조절하는 방법과, 연소관 내부 압력에 의해 이득을 조절하는 방법으로 두종류의 이득 계획 제어기를 설계하였다. 각 제어기를 가변 추력기 모델에 적용하여 폐루프 시스템 응답특성을 비교하였으며 가변 추력 추진기관 특성에 따라서 어떤 제어기를 선택하는 것이 유리한지 제안하였다.

• Journal of Periodontal and Implant Science
• /
• 제51권4호
• /
• pp.239-253
• /
• 2021

Purpose: The single-flap approach (SFA) is a minimally invasive technique with limited mucoperiosteal flap elevation to gain access to the buccal/palatal aspects, thus limiting post-surgical complications. The purpose of the present study was to gain insights into the impact of the SFA over the double-flap approach (DFA) on periodontal flap treatment outcomes and patient compliance in terms of discomfort and time taken for surgical procedures. Methods: Twenty patients with persistent probing pocket depths of ≥5 mm were scheduled for the SFA (test site) and for the DFA (control site). All the clinical periodontal parameters were recorded at baseline, 3 months, and 6 months. Radiographic bone level (cone-beam computed tomography) was evaluated at baseline and 6 months. Patients' postoperative pain perception and wound healing were also assessed. Results: The SFA showed a significant reduction in periodontal pocket depth, gain in clinical attachment level (CAL), and gain in bone level when compared with the DFA. The SFA substantially improved wound healing and induced less postoperative pain than the DFA. Conclusions: The SFA resulted in substantial improvement in the composite outcome measures, as shown by a reduction in pocket depth with minimal gingival recession, gain in CAL, early wound healing, less postoperative discomfort, and better patient-centered outcomes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.372-374
• /
• 2001

An automatic operation of train is executed by an automatic train operation(ATO) system. The main function of ATO system is to control train speed as well as train brake system. So that train can stop at its programed position on platform and run with passenger comfort. In this paper, the gain scheduled control is designed for speed control considering the disturbances. The simulation is executed to verify the speed control performance and to compare its performance with the conventional PI and general Fuzzy control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.421-423
• /
• 1999

The function of the automatic train operation(ATO) system is to regulate the train ride comfort during start, acceleration and deceleration and execute operation of constant speed travelling and fixed point parking. The mathematical model for the train is presented by considering unknown disturbances which consist of start resistance, travelling resistance, slope resistance, curve resistance and so on. The speed control of ATO system is designed by considering the disturbances. The simulation is executed to verify the speed control performance and compare its performance with that of a PID-type ATO control system under the disturbances. Simulation results show that the control performance of gain scheduled control for ATO system is better than that of the conventional PID controller.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.280-287
• /
• 1999

An automatic train operation(ATO) system executes the operation of constant speed travelling and fixed point parking by using microprocessors instead of drivers manual operation. This paper describes the mathematical model for the train considering unknown disturbances which consist of start resistance, travelling resistance, slope resistance, curve resistance, and so on. The speed controller of ATO system is designed by considering the disturbances. The simulation is executed to verify the speed control and fixed point parking performance and to compare its performance with that of a PID-type ATO control system under disturbances. Simulation results show that the control performance of gain scheduled control scheme fur ATO system is better than that of the conventional PID controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.452-454
• /
• 1998

Asymmetric cylinders are usually used as an actuator of active suspensions. The conventional optimal controller design does not include actuator dynamics as a state. and force controller is needed to track the desired force. But the actuator is not ideal, so performance of an active suspension system is degraded. In this paper, we take account nonlinear actuator dynamics and obtain a linear model using a feedback linearization technique then apply optimal control method. For real time application, gain-scheduling method is used. Effectiveness of proposed method is demonstrated by numerical simulation of 1/4 car model.