• 한국전자파학회논문지
• /
• 제9권3호
• /
• pp.305-316
• /
• 1998

마이크로스트립 안테나의 대역폭을 확장하는 기법으로 SRFT에 의한 임피던스 정합회로를 제안한다. 이 기법의 유용성은 주파수가 안테나의 입력임피던스의 공진특성에는 영향을 주고, 방사패턴과 이득 특성에는 별로 영향을 주지 않는다는 것에 기초한다. 이 기법의 특정은 안테나와 전원에 대한 이론적인 기술을 할 필요가 없고 요구되는 주파수대에서 전원과 부하의 데이터를 직접 이용한다. 또한 사전에 정합회로의 topology를 구하기 위한 전달함수의 이론적 형태가 필요없다. 본 연구에서는 구형 마이크로스트립 안테나의 해석에 전송선로 모델올 이용하고, Fano의 대역폭 확장이론올 기초로하여 원하는 주파수대에서 일정한 이득을 갖는 마이크로스트립 안테나의 정합회로를 설계하는데 SRFT 를 도입하여 구조가 다른 두 개의 마이크로스트립 안테나를 제작하여 실험하였다. 그 결과, 제안된 임피던스 정합회로를 갖는 마이크로스트립 안테나는 정합회로가없는 안테나보다 약 3배의 대역폭이 확장됨을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.112-116
• /
• 2005

This paper presents a broadband two-stage low noise amplifier(LNA) operating from 3 to 10 GHz, designed with 0.18 ${\mu}m$ RF CMOS technology, The cascode feedback topology and broadband matching technique are used to achieve broadband performance and input/output matching characteristics. The proposed UWB LNA results in the low noise figure(NF) of 3.4 dB, input/output return loss($S_{11}/S_{22}$) of lower than -10 dB, and power gain of 14.5 dB with gain flatness of $\pm$1 -dB within the required bandwidth. The input-referred third-order intercept point($IIP_3$) and the input-referred 1-dB compression point($P_{ldB}$) are -7 dBm and -17 dBm, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.539-540
• /
• 2008

This paper presents an ultra-wideband (UWB) CMOS low noise amplifier (LNA) topology that operates in 3.1-10.6GHz band. The common gate structure provides wideband input matching and flattens the passband gain. The proposed UWB amplifier is implemented in 0.18 um CMOS technology for lower band operation mode. Simulation shows a minimum NF of 2.35 dB, a power gain of $18.3{\sim}20\;dB$, better than -10 dB of input and output matching, while consuming 16.4 mW.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.257-262
• /
• 2012

The Ministry of Information-Communication assigned 18~19GHz frequency band for communication of cabins and platform to link between subway/train and it's station. In this paper, we propose wireless transmission devices which are 2 stage hybrid low noise amplifier of 18GHz band and mixer for 18GHz as well to apply for RF receiver. We designed LNA to be noise matched its 1st stage and gain matched for 2nd stage and mixer using $180^{\circ}$ hybrid coupler to suppress the spurious signal. The transistors of 18 GHz LNA and mixer are NE3210S01 of NEC and KMB-N51-1, respectively. As the result of simulation, we get 19.92dB gain and 2.06dB noise figure with LNA and 8.61dB conversion loss with mixer.

• International Journal of Contents
• /
• 제2권1호
• /
• pp.29-33
• /
• 2006

The common-source low noise amplifier(LNA) with inductive degeneration using a genetic algorithm is designed and tested for a down converter in an industrial, scientific and medical (ISM) band application and a wireless broadband internet service (WiBro). The genetic algorithm optimizes the reflection coefficients to be well matched the input and output ports between multistage transistor amplifiers, and it generates low voltage standing wave ratio as well as gain flatness of the amplifier. The stability and the gain flatness of the LNA have been improved by combining the matching circuits and the series feedback microstrip lines with inductive degeneration at common-source port. In the frequency range of ISM band and WiBro application operating at $2.3GHz{\sim}2.5GHz$, the measured power gain and maximum voltage standing wave ratio (VSWR) of the LNA are $41{\pm}0.5dB$ and 1.3, and the noise figure of the LNA is lower than 0.85dB. The above results are agreed well with the theoretical values of the amplifiers.

• 로봇학회논문지
• /
• 제7권1호
• /
• pp.45-56
• /
• 2012

This paper proposes how to improve the performance of CSS-based indoor localization system. CSS based localization utilizes signal flight time between anchors and tag to estimate distance. From the distances, the 3-dimensional position is calculated through trilateration. However the error in distance caused from multi-path effect transfers to the position error especially in indoor environment. This paper handles a problem of reducing error in raw distance information. And, we propose the new localization method by pattern matching instead of the conventional localization method based on trilateration that is affected heavily on multi-path error. The pattern matching method estimates the position by using the fact that the measured data of near positions possesses a high similarity. In order to gain better performance of localization, we use EKF(Extended Kalman Filter) to fuse the result of CSS based localization and robot model.

• 전자공학회논문지D
• /
• 제34D권10호
• /
• pp.24-31
• /
• 1997

A new design method of stable RF power amplifier using 3dB coupled line is proposed in this thiesis. The proposed method of broadband matching consist of resistive matching circuits at low frequency and lossless matching circuits at microwave band. This design method increase the stability of an amplifier and is suitable for interstage matching. When high power amplifier is designed using this method for PCS base transceiver station, the measured resutls show thst the gain of 18.5dB, and 9W (39.5dBm) output power. We use motorola's MRF6401 for medium power and MRF 6402 for large power and cascaded them.

• 전자공학회논문지D
• /
• 제34D권3호
• /
• pp.9-16
• /
• 1997

A 23GHz 1-stage LNA was designed by using new topology of coupled line type with EEsof softwares and modified by using MPIE numerical analysis. The parallel coupled filter-type matching sections give impedance matching and DC blocking simultaneously, and have small discontinuities. This matching scheme has simple structure in the design process and give small error. The EFT chip was directly attached to the ground metal. The designed LAN gives 6.2dB gain and 2.5dB noise figure without considering the loss of connectors. Through these results, it was verified that our design process, matching schemes and fabrication technologies was valied for developing 20GHz-band LNA.

• 한국전자파학회논문지
• /
• 제13권3호
• /
• pp.237-242
• /
• 2002

본 논문에서는 임피던스 정한 방법을 이용하여 IMT-2000 주파수 대역인 2.155 GHz 대역에 사용할 수 있는 능통 여파기를 설계 및 제작하였다. 임피던스 정합과 공진기를 구현하기 위하여 아미크로스트립 랑니을 이용하였다. 능동 여파기의 측정결과 중심주과수 2.18 GHz에서 대역폭 75 MHz, 삽입 이득 14.1 ㏈, 중심주파수를 기준으로 $\pm$200 MHz 떨어진 지점에서 23㏈의 가쇄 특성을 보였다.

• Journal of electromagnetic engineering and science
• /
• 제8권1호
• /
• pp.28-33
• /
• 2008

We have proposed a novel DVB-H(Digital Video Broadcast for Handheld) antenna for folder-type mobile handheld terminal by using a coupling element, a stub, and an L-type matching circuit. The L-type matching circuit consisting of two chip inductors is used for achieving an improved impedance matching over the DVB-H frequency band ($470{\sim}702\;MHz$). Simulated results showed the stub worked to more knot the lower and upper frequency ends of the input impedance curve. The antenna exhibits a flat gain characteristic from 2 to 2.8 dBi over the DVB-H frequency band. The radiation patterns are a stable Figure-of-eight radiation pattern in the frequency range.