• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.975-978
• /
• 2003

본 논문에서는 비디오 신호 인터페이스를 위해 10비트 50MHz ADC 를 설계하였으며 DCL(digital-error correction logic)을 갖는 3-3-3-4 구조의 파이프라인 방식을 사용하였다. SHA(sample and hold amplifier)와 MDAC (multiplying digital-to-analog converter)에 쓰이는 증폭기는 높은 이득을 갖도록 gain-boosting 기법을 적용하였으며, 전력소모와 면적을 줄이기 위해 capacitor scaling 기법을 적용하였다. 본 ADC 는 0.35 μm double-poly four-metal n-well CMOS 공정으로 설계 및 제작하였으며, 전체 회로는 3.3V 단일 전원 전압에서 동작하도록 설계하였다. 측정 결과 5MHz 의 입력을 인가하였을 때 SNDR 은 56.7dB, 전체 전력 소모는 112mW 이며, 입출력 단의 패드를 포함한 전체 칩 면적은 2.6mm×2.6mm이다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.68-75
• /
• 1994

A new Predistortor that is designed using Feedforward type is proposed to overcome the nonlinearity of HPA (High Power Amplifier). HPA has the nonlinearity of the gain compression and phase distorton, so digital communication system of multi-carrier TDMA needs the linear RF transmitter. Using IMD (Intermodulation Distortion) of drive amplifier, as Feedforward type, the inverse IMD is coupled to the main loop with variable attenuators, phase shifters, and sub-amplifiers well designed. At the input of main amplifier, the over-coupled IMD surpresses the main amplifier 's IMD. Adjusting the level and phase of IMD at the sub loop, C/I of HPA is better than before correction.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.126-129
• /
• 1999

In this paper, it is assumed that a mobile radio channel is a Rayleigh distributed multipath fading channel and Erlang capacity and equivalent channel numbers are calculated for the reverse link of a imperfect power controlled DS/CDMA cellular system considering both shadowing and multipath fading. The DS/CDMA blocking probability is calculated based on a new analysis method that considers Erlang capacity and ICF(interference correction factor) using the median value of $E_{b(i)}$/ $I_{o}$ corresponding to each reverse link user. It is showed that the effect of multipath fading must not be ignored in Erlang capacity of the IS-95 DS/CDMA cellular system and the Erlang capacity is decreased according to the increase of the deviation of the imperfect power control, to the decrease of the processing gain, to the increase of the voice activity.y.

• The korean journal of orthodontics
• /
• v.1 no.1
• /
• pp.33-37
• /
• 1970

Class III malocclusions are difficult to treat and take more time than any other types. But if such problems are detected at the earliest opportunity, we may gain the best possible correction consistent with the limitations imposed by morphogenetic pattern. The question of whether a patient has false or real Class III malocclusion is not important. Therapy wilt eleminate the malrelationship, in any event. Graber said, 'It has been my experience that many so-called 'pseudo' Class III's are full-blown Class III's later on during the prolific growth period.' The authors have attempted early treatment of a Class III malocclusion of 8-year old girl, who has the familial history of Class III malocclusion.

• Journal of Korea Multimedia Society
• /
• v.9 no.6
• /
• pp.728-734
• /
• 2006

Carrier interferometry code is considered as a promising scheme that provides significant performance improvement via frequency diversity effect. Space-time coding is commonly employed to achieve a performance gain through space diversity. The combination of these techniques and forward error correction coding will lead to enhanced system capacity and performance. This paper presents a low-density parity check (LDPC) coded space-time orthogonal frequency division multiplexing (OFDM) transmission scheme with carrier interferometry code for high-capacity and high-performance mobile multimedia communications. Computer simulations demonstrate that the proposed mobile multimedia transmission system offers a considerable performance improvement of approximately 9dB in terms of Eb/No in the Rayleigh fading channel with relatively low delay spread, in comparison with space-time OFDM. Performance gains are further increased, comparing with traditional OFDM systems.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.295-308
• /
• 2000

OSMI(Ocean Scanning Multi-Spectral Imager) raw image data(Level 0) were acquired and radiometrically corrected. We have applied two methods, using solar & dark calibration data from OSMI sensor and comparing with the SeaWiFS data, to the radiometric correction of OSMI raw image data. First, we could get the values of the gain and the offset for each pixel and each band from comparing the solar & dark calibration data with the solar input radiance values, calculated from the transmittance, BRDF (Bidirectional Reflectance Distribution Function) and the solar incidence angle($\beta$, $\theta$) of OSMI sensor. Applying this calibration data to OSMI raw image data, we got the two odd results, the lower value of the radiometric corrected image data than the expected value, and the Venetian Blind Effect in the radiometric corrected image data. Second, we could get the reasonable results from comparing OSMI raw image data with the SeaWiFS data, and get a new problem of OSMI sensor.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.187-190
• /
• 2007

The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. The GOCI has been designed to provide multi-spectral data to detect, monitor, quantify, and predict short term changes of coastal ocean environment for marine science research and application purpose. The target area of GOCI observation covers sea area around the Korean Peninsula. Based on the nonlinear radiometric model, the GOCI calibration method has been derived. The nonlinear radiometric model for GOCI will be validated through ground test. The GOCI radiometric calibration is based on on-board calibration devices; solar diffuser, DAMD (Diffuser Aging Monitoring Device). In this paper, the GOCI radiometric error propagation is analyzed. The radiometric model error due to the dark current nonlinearity is analyzed as a systematic error. Also the offset correction error due to gain/offset instability is considered. The radiometric accuracy depends mainly on the ground characterization accuracies of solar diffuser and DAMD.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.874-881
• /
• 2014

This study presents a single-phase power factor correction AC-DC converter that operates in discontinuous conduction mode. This converter uses the pulse-width modulation technique to achieve almost unity power factor and low total harmonic distortion of input current for universal input voltage $90V_{rms}$ to $264V_{rms}$) applications. The converter has a simple structure and electrical isolation. The magnetizing-inductor energy of the transformer can be recycled to the output without an additional third winding. The steady-state analysis of voltage gain and boundary operating conditions are discussed in detail. Finally, experimental results are shown to verify the performance of the proposed converter.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.591-598
• /
• 2014

This paper proposes a new min-sum algorithm for low-density parity-check decoding. In this paper, we first define the negative and positive effects of the received signal-to-noise ratio (SNR) in the min-sum decoding algorithm. To improve the performance of error correction by considering the negative and positive effects of the received SNR, the proposed algorithm applies adaptive scaling factors not only to extrinsic information but also to a received log-likelihood ratio. We also propose a combined variable and check node architecture to realize the proposed algorithm with low complexity. The simulation results show that the proposed algorithm achieves up to 0.4 dB coding gain with low complexity compared to existing min-sum-based algorithms.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.641-648
• /
• 2014

This paper presents the design considerations and analysis for an interleaved boundary conduction mode power factor correction buck converter. A thorough analysis of the harmonic content of the AC line current is presented to examine the allowable voltage gain (K value) for meeting the EN61000-3-2, Class D standard while maximizing efficiency. The results of the harmonic analysis are used to derive the required value of K and therefore the output voltage necessary to meet the class D requirements for a given AC line voltage. The discussed design consideration and harmonic current analysis are verified on a 300W universal line experimental prototype converter with an 80V output. The measured efficiencies remain above 96% down to 20% of the full load. The input current harmonics also meet the IEC61000-3-2 (class D) standard.