• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.291-298
• /
• 2005

In this article. the specifications of a future container crane for a 18,000 TEU megaship are investigated After studying the transitions of containerships through the past half century, the characteristics of the past and current container cranes are outlined. together with various research trends throughout the world Upon these results, the size and performance of the container crane that will be used beyond the year 2014 are forecast. Specifically, the structure, trolley and hoist mechanism, control method, outreach. backreach, rail gage, loading capacity, stability, durability, and others are summarized.

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.26-31
• /
• 2015

This paper describes the characteristics of voltage drop and thermal for poor connection on electrical connector of circuit breaker in control box of small size pulverizer. In order monitor, we did the changes of RMS in voltage and temperature value with video and made normal state over $2.5N{\cdot}m$ and poor connections state below $0.2N{\cdot}m$ by screw gage. In case of voltage signal, the voltage drop was increased when the current was increased due to poor connections. In case of temperature signal, the temperature difference indicates ten times at 5A and fourteen times at 15A in the normal state. According to increase thermal energy, the insulation of electrical wiring and connector of circuit breaker can be carbonized. The results of this study will be useful to the development of preventive devices and system for electric fire by poor connection at small size pulverizer.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.60-65
• /
• 2007

Local buckling behaviors of aluminum square tube beams reinforced by aluminum plates under three point bending loads have been analyzed using experimental tests combined with theoretical and finite element analyses. For this analysis true stresses were determined from applied loads and cross-sectional area records of a tensile specimen with a rectangular cross-section by real-time photographing. True strains were also obtained from in-situ local elongation measurements of the specimen gage portion by the multi-point scanning laser extensometer. Six kinds of aluminum tube beam specimens reinforced by aluminum plates were employed for the bending test. The bending deformation behaviors up to the maximum load analyzed by the numerical simulation agreed well with experimental ones. After passing the maximum load, reinforcing plate hindering the local buckling of the tube beam was debonded from the aluminum tube beam. An aluminum tube beam strengthened by aluminum plate on the upper web showed the most excellent bending capacity, which could be explained on the basis of the neutral axis shift and the local buckling deformation range.

• Tribology and Lubricants
• /
• v.24 no.1
• /
• pp.27-33
• /
• 2008

A micro-impression creep machine was designed and developed, adopting a small punch in diameter of 150 um, displacement gage with an accuracy of sub-${\mu}m$ scale, and load-cell with an accuracy of mN scale in order to investigate creep behavior of small solder ball in diameter of less than 1 mm. Creep behavior of lead-free solder ball(Sn-3.0Ag-0.5Cu) in diameter of $760\;{\mu}m$ was investigated in the stress range of $8{\sim}60\;MPa$ and at $303\;K{\sim}393\;K$. The applied load became decreased slightly and continuously in the creep rate of $10^{-4}/s$ range during the current experiments. Also, the machine frame was so sensitive to the environmental temperature that nm scaled displacement recording was unstable according to the change in environmental temperature.

• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.168-176
• /
• 2014

This paper presents an engine oil change warning algorithm based on the test results of a small dip-stick-gage-type engine-oil-deterioration-detection sensor, software to realize the algorithm and a display device to apply the software. The algorithm determines the engine oil deterioration condition from the rate of change in the dielectric constant based on the average measured capacitance at $80^{\circ}C$ after the engine stops. The rate of change in the dielectric constant at the time for oil change correlates with the time that one of recommended warning limits for engine oil physical properties such as TAN (Total Acid Number), TBN (Total Base Number) and viscosity is first reached. At this point, a warning signal for oil change appears on the display device like a smart-phone or individual display device. The frames of smartphone app have three stages. The user can directly input all of the thresholds into the frame of the smartphone app. The screen of the display device comprises one frame for each warning signature with the related message. The user can input the thresholds to the device through a USB cable connected to a personal computer.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.58-58
• /
• 2011

동해를 전파하는 지진해일은 다른 지역에서 발생하는 지진해일과 비교하였을 때 상대적으로 파장이 짧고, 파장에 비해 먼거리를 전파한다. 따라서 지진해일이 전파할 시 물리적인 분산효과가 매우 중요하다. 그러므로 동해에서 발생하는 지진해일을 수치모의 할 때는 분산효과가 충분히 고려될 수 있는 선형 Boussinesq 방정식을 사용한다. 그러나 이를 직접 풀 경우에는 상당히 많은 시간이 소비되며 효율적이지 못하다. 이와 같은 단점을 극복하기 위해 기존의 연구에서는 leap-frog 기법을 사용하여 선형 천수방정식을 차분할 때 발생하는 수치분산항을 선형 Boussinesq 방정식의 분산항과 같은 형태를 가질 수 있도록 분산보정계수를 사용하여 수치모의를 수행하였다. 하지만 이때 사용된 지배방정식은 수심이 일정하다는 가정을 이용하여 유도된 것이므로, 실제 경사가 있는 지형을 통과할 때의 수치모의 결과는 정확하다고 할 수 없다. 본 연구에서는 이를 극복하기 위하여 바닥 지형이 1차원으로 변한다는 가정으로 새로운 지배방정식을 유도하였으며, 수심변화로 인해 새로 발생하는 항을 기존의 분산보정기법에 추가하였다. 또한 수심이 변화는 지형을 통과하는 지진해일의 분산효과가 충분히 고려되는지 확인하기 위하여 Gaussian hump를 이용하여 가상 지진해일을 원형 천퇴지형에 통과시키는 수치모의를 수행하였다. 결과의 비교를 위한 정확해가 없으므로, 비선형 Boussinesq 방정식을 직접 차분하여 푸는 FUNWAVE를 이용하여 동일한 조건으로 수치모의를 수행하였다. 수치모의 시 중심선에 4개의 가상 gage를 설치하였으며, 이를 통해 각각의 수치모의 실험에 대한 자유수면 변위를 관찰하여 비교하였다. 수치모의 결과에 대한 비교를 통하여 기존의 분산보정기법에 비해 본 연구에서 제안한 새로운 수치기법이 분산효과를 비교적 잘 반영하는 것으로 나타났으며, 비교적으로 실제 지형에 적용하였을 때 정확도 향상의 가능성이 높다고 판단하였다.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.79-86
• /
• 1998

The effect of specimen thickness on fatigue crack growth behavior has been carried out by compact tension specimens of thickness of 3mm, 10mm and 25mm for maraging steel and Al 7075-T6. The closure points were determined during the test by means of a clip-gage situated at the notch mouth. Specimen thickness have no apparent influence on the fatigue crack growth rate of maraging steel, but the crack growth rate of 25mm thickness specimen for Al 7075-T6 is faster than that of 3 and 10mm specimens. The difference of crack growth rates can be successfully explained by considering the different stress state of plane strain and plain stress due to the variation of specimen thickness. Also the crack opening ratio of 25mm specimen is greater than those of 3 and 10mm specimens. When a side groove is introduced in a 10mm specimen, the crack growth rate is approximately similar to that of 25mm specimen. The effective thickness expression of $B_e=B_o-(B_o-B_N)^2B_o$ is the most appropriate to evaluate the crack growth rate of side-grooved specimen. Fatigue crack growth rates can be well described by $\Delta K_{eff}$ of the crack closure points in regardless of all thickness and side-grooved specimens.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.5
• /
• pp.9-16
• /
• 2011

Curve Numbers (CN) for the combination of land use and hydrologic soil group were regionalized at Imha Watershed using Long-term Hydrologic Impact Assessment (L-THIA) coupled with SCE-UA. The L-THIA was calibrated during 1991-2000 and validated during 2001-2007 using monthly observed direct runoff data. The Nash-Sutcliffe (NS) coefficients for calibration and validation were 0.91 and 0.93, respectively, and showed high model efficiency. Based on the criteria of model calibration, both calibration and validation represented 'very good' fit with observe data. The spatial distribution of direct surface runoff by L-THIA represented runoff from Thiessen pologen at Subi and Sukbo rain gage station much higher than other area due to the combination of poor hydrologic condition (hydrologic soil C and D group) and locality heavy rainfall. As a results of hydrologic condition and treatment for land use type based on calibrated CNs, forest is recommended to be hydrologically modelled dived into deciduous, coniferous, and mixed forest due to the hydrological difference. The CNs for forest and upland showed the poor hydrologic condition. The steep slope of forest and alpine agricultural field make high runoff rate which is the poor hydrologic condition because CN method can not consider field slope. L-THIA linded with SCE-UA could generated a regionalized CNs for land use type with minimized time and effort, and maximized model's accuracy.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.6
• /
• pp.7-16
• /
• 2017

Purpose - Today's world revolves around search engines which are the driving force behind any marketer. The thirst for marketing has led to the evolution of online 'Pay per click' over last few years and is the most widely used instrument. Research design, data, and methodology - Exploratory research design highlights many marketing variables getting affected by pay per click marketing. To analyze the said phenomenon, the data was gathered through questionnaire from the sample of 338 respondents which were selected by simple random sampling method mostly from the National Capital Region (NCR) of Delhi in India. The data collected from the respondents was loaded on SAS base for exploratory factor analysis and multiple regression analysis. Results - Pay per click as a marketing tool has significant impact on the consumers. The most prominent factors of pay per click marketing identified in the research are Ad quality, Competition, Targeting, Trend and Budget. Conclusions - Organic as well as inorganic ads, keeping in mind the end goal to gage the exchange of these two postings in the marked look territory. Additionally, here we dissected supported pursuit promotions in all. It would be beneficial to break down the impact of promotion position on the pay per click marketing.

• Journal of Korea Foundry Society
• /
• v.26 no.2
• /
• pp.85-91
• /
• 2006

Inclusions in Ti investment castings are generally known to have detrimental effects on the performance of the castings. However, actual inclusions are infrequent and hard to be located. As a result, it is extremely difficult to obtain sufficient amount of fatigue test specimens of titanium investment castings having inclusions in the gage section. Thus, in-depth research of the adverse influence of inclusions is also hindered. To address this problem, a new casting methodology of specimens containing hard alpha inclusions was developed in this study. To guarantee successful introduction of an inclusion and casting, a carefully designed mold with 8 legs and a special tool were employed. After solidification, castings were cut, and X-ray radiography determined that the inclusions were successfully incorporated into the castings. The castings were further prepared to obtain multiple test specimens and they were fatigue-tested consecutively. Fractography analysis confirmed that fatigue cracks initiated at the hard alpha inclusion. In a nonlinear regression model, the fatigue life can be modeled as an exponential function with a negative exponent of the cross-sectional area of an inclusion. The fatigue life of Ti specimens containing inclusions is inversely proportional to the cross-sectional area of an inclusion.