• Korean Journal of Materials Research
• /
• v.30 no.3
• /
• pp.131-135
• /
• 2020

Silver nanowire (AgNW) networks have been adopted as a front electrode in Cu(In,Ga)Se2 (CIGS) thin film solar cells due to their low cost and compatibility with the solution process. When an AgNW network is applied to a CIGS thin film solar cell, reflection loss can increase because the CdS layer, with a relatively high refractive index (n ~ 2.5 at 550 nm), is exposed to air. To resolve the issue, we apply solution-processed ZnO nanorods to the AgNW network as an anti-reflective coating. To obtain high performance of the optical and electrical properties of the ZnO nanorod and AgNW network composite, we optimize the process parameters - the spin coating of AgNWs and the concentration of zinc nitrate and hexamethylene tetramine (HMT - to fabricate ZnO nanorods. We verify that 10 mM of zinc nitrate and HMT show the lowest reflectance and 10% cell efficiency increase when applied to CIGS thin film solar cells.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.4
• /
• pp.145-150
• /
• 2014

GaN nanorods were grown on the apex of GaN stripes by three dimensional selective growth method. $SiO_2$ mask was partially removed only on the apex area of the GaN stripes by an optimized photolithography for the selective growth. Metallic Au was deposited only on the apex of the GaN stripes and a selective growth of GaN nanorods was followed by a metal organic vapor phase epitaxy (MOVPE). We confirmed that the shape and size of the GaN nanorods depend on growth temperature and flow rates of group III precursor. GaN nanorods were grown having a taper shape which have sharp tip and triangle-shaped cross section. From the TEM result, we confirmed that threading dislocations were rarely observed in GaN nanorods because of the very small contact area for the selective growth. Stacking faults which might be originated from a difference of the crystal facet directions between the GaN stripe and the GaN nanorods were observed in the center area of the GaN nanorods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.180-180
• /
• 2012

Heteroepitaxial GaN nano- and micro-rods (NMRs) are one of the most promising structures for high performance optoelectronic devices such as light emitting diodes, lasers, solar cells integrated with Si-based electric circuits due to their low dislocation density and high surface to volume ratio. However, heteroepitaxial GaN NMRs growth using a metal-organic vapor phase epitaxy (MOVPE) machine is not easy due to their long surface diffusion length at high growth temperature of MOVPE above $1000^{\circ}C$. Recently some research groups reported the fabrication of the heteroepitaxial GaN NMRs by using MOVPE with vapor-liquid-solid (VLS) technique assisted by metal catalyst. However, in the case of the VLS technique, metal catalysts may act as impurities, and the GaN NMRs produced in this mathod have poor directionallity. We have successfully grown the vertically well aligned GaN NMRs on Si (111) substrate by means of self-catalystic growth methods with pulsed-flow injection of precursors. To grow the GaN NMRs with high aspect ratio, we veried the growth conditions such as the growth temperature, reactor pressure, and V/III molar ratio. We confirmed that the surface morphology of GaN was strongly influenced by the surface diffusion of Ga and N adatoms related to the surrounding environment during growth, and we carried out theoretical studies about the relation between the reactor pressure and the growth rate of GaN NMRs. From these results, we successfully explained the growth mechanism of catalyst-free and mask-free heteroepitaxial GaN NMRs on Si (111) substrates. Detailed experimental results will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.116-116
• /
• 2004

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.229-234
• /
• 2017

In this study, we fabricated a TFT gas sensor with ZnO nanorods grown by hydrothermal synthesis. The suggested devices were compared with the conventional ZnO film-type TFTs in terms of the gas-response properties and the electrical transfer characteristics. The ZnO seed layer is formed by atomic-layer deposition (ALD), and the precursors for the nanorods are zinc nitrate hexahydrate ($Zn(NO_3)_2{\cdot}6H_2O$) and hexamethylenetetramine ($(CH_2)6N_4$). When 15 ppm of NO gas was supplied in a gas chamber at $150^{\circ}C$ to analyze the sensing capability of the suggested devices, the sensitivity (S) was 4.5, showing that the nanorod-type devices respond sensitively to the external environment. These results can be explained by X-ray photoelectron spectroscopy (XPS) analysis, which showed that the oxygen deficiency of ZnO nanorods is higher than that of ZnO film, and confirms that the ZnO nanorod-type TFTs are advantageous for the fabrication of high-performance gas sensors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.208-208
• /
• 2013

ZnO는 직접천이형 반도체로 약 3.37 eV의 넓은 에너지 band-gap과 60 meV의 비교적 큰 엑시톤 결합 에너지를 가지고 있다. 또한 단결정 성장 가능과 투명성 등 많은 장점들로 인하여 GaN와 대체할 자외선 또는 청색 발광소자나 ITO를 대체할 투명전극 같은 광범위한 광전소자로 큰 주목을 받으며 연구되어 왔다. 이러한 ZnO는 다양한 물질들의 첨가를 통해 인위적으로 특성변화가 가능한데 Mg, Be, Cd 첨가를 통한 에너지 밴드갭의 확장과 수축, Al 첨가를 통한 전기전도성의 증가 등이 그 예이다. 최근에는 밴드갭 조절을 이용한 ZnO-ZnMgO와 같은 이종접합구조가 광소자 등의 응용을 목적으로 많은 연구가 이루어지고 있다. 더불어 나노선이나 나노막대 같은 1차원 구조를 갖는 ZnO 계열 반도체의 연구는 현재 큰 이슈가 되고 있는 나노 크기의 소자 개발에 매우 큰 적용 가능성을 가지고 있다. 우리는 수열합성법을 이용하여 hexagonal ZnO 나노막대를 성장하고 그 표면에 core-shell 형태의 $ZnO-Zn_{1-x}Mg_xO$ (x=0.084) 양자우물을 원자층증착법으로 증착하였다. 본 연구에서는 만들어진 ZnO 나노막대와 ZnO-ZnMgO 나노막대, core-shell ZnO-ZnMgO 양자우물 sample들의 저온(5 K) Photoluminescence 측정을 통하여 광학적 band 구조를 분석하였다. 실험적으로 의도된 양자우물 두께와 다른 실제 형성된 양자무물의 두께를 알아내기 위하여 2차원 hexagonal 양자우물 band 구조에서 self-consistent nonlinear Poisson-Schr$\"{o}$dinger 방정식 계산과 컴퓨터 시뮬레이션을 이용하였으며, 이 방법으로 계산된 값과 실험값의 비교를 통하여 실제 형성된 양자우물의 두께를 정량적으로 유출할 수 있었다.