• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.128.2-128.2
• /
• 2014

Long-wave infrared detectors using the type-II InAs/GaSb strained superlattice (T2SL) material system with the nBn structure were designed and fabricated. The band gap energy of the T2SL material was calculated as a function of the thickness of the InAs and GaSb layers by the Kronig-Penney model. Growth of the barrier material (Al0.2Ga0.8Sb) incorporated Te doping to reduce the dark current. The full width at half maximum (FWHM) of the 1st satellite superlattice peak from the X-ray diffraction was around 45 arc sec. The cutoff wavelength of the fabricated device was ${\sim}10.2{\mu}m$ (0.12eV) at 80 K while under an applied bias of -1.4V. The measured activation energy of the device was ~0.128 eV. The dark current density was shown to be $1.2{\times}10^{-5}A/cm^2$ at 80 K and with a bias -1.4 V. The responsivity was 1.9 A/W at $7.5{\mu}m$ at 80K and with a bias of -1.9V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.41-45
• /
• 2003

Impurities transmuted in GaN thin film and GaN nanowires after neutron irradiation are studied in this work. The structural properties of GaN nanowires were shown using by Transmission Electron Microscope(TEM). Transmuted impurities that are expected to be doped into GaN thin film and GaN nanowires are then confirmed by photoluminescence(PL). Transmuted atom in GaN materials is Ge atom, Ge-related peaks in GaN thin film lead to emit at 2.9eV, 2.25eV. But emission bands at 2.9eV, 2.25eV are not shown in PL spectra of GaN nanowires. Our experimental results are expected to give deep impact on nano-material doping technology for the achievement of the fabrication of nano-devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.219-219
• /
• 2013

The effect of an electron blocking layer (EBL) on V-I curves in GaN/InGaN multiple quantum well is investigated. For the first time, we found that curves were intersected at 3.012 V and analyzed the reason for intersection. The forward voltage in LEDs with an p-AlGaN EBL is larger than without p-AlGaN EBL at low injection current because the Mg doping efficiency for p-GaN layer was higher than that of p-AlGaN layer. However, the forward voltage in LEDs with an p-AlGaN EBL is smaller than without p-AlGaN EBL at high injection current because the carriers overflow from the active layer when injection current increases in LEDs without p-AlGaN EBL and in case of LED with p-AlGaN EBL, the carriers are blocked by EBL.

• Journal of Sensor Science and Technology
• /
• v.31 no.1
• /
• pp.31-35
• /
• 2022

The efficacy improvement of the light emitting diode (LED) was studied for the realization of small-size, low power consumption, and highly sensitive bio-sensor instrument. The performance of the LED with Mg delta-doping at the interface of AlGaN/GaN super-lattice in p type cladding layer was simulated. The device with Mg delta-doping showed improved current, radiative recombination rate, electroluminescence, and light output power compared to the conventional LED structure. Under the bias condition of 5 V, the improved device exhibited 20.8% increase in the light output power. This is attributed to the increment of hole concentration from stable ionization of Mg in p type cladding layer. This result is expected to be used for the miniaturization, power saving, and sensitivity improvement of the bio-sensor system.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.37-41
• /
• 2010

The authors investigated the photoluminescence (PL) and the electron paramagnetic resonance (EPR) from an magnesium (Mg)-doped GaN thin film with a delta-doped layer. The regularly doped sample shows a PL peak at 2.776 eV for the as-grown sample, and the peak shifts to 2.904 eV and increases in intensity for the annealed sample. The delta-doped sample also shows the same PL peak as does the regularly doped sample. However, only the annealed delta-doped layer shows a sharp EPR with a small isotropic Lande g-factor, $g_{II}$, of 2.029. This resonance is attributed to the delta-doped layer, which forms a hole-bound Mg-N atomic structure instead of the $Mg_{Ga}-V_N$ defect complex, indicating that the delta-doped sample was not optically activated to form PL centers but was instead electrically activated to form a hole-bound state.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.96-101
• /
• 2003

Direct evidence on the incorporation of high concentration of oxygen into undoped AlGaN layers for the AlGaN/GaN heterostuctures is provided by scanning photoemission microscopy using synchrotron radiation. In-situ annealing at $1000^{\circ}C$ resulted in a significant increase in the oxygen concentration at the AlGaN surface due to the predominant formation of Al-O bonds. The oxygen incorporation into the AlGaN layers resulting from the high reactivity of Al to oxygen can enhance the tunneling-assisted transport of electrons at the metal/AlGaN interface, leading to the reduction of the Schottky barrier height and the increase of the sheet carrier concentration near the AlGaN/GaN interface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.476-477
• /
• 2013

반도체의 성능은 최근 10년 사이에 급격하게 발전했고 아날로그 및 디지털 회로 소자들에 있어 저전력/고속 특성 요구가 커지고 있다 [1]. 상온에서 30,000 $cm^2$/Vs 이상의 전자 이동도를 가지며 큰 conduction band offset을 갖는 InAs/AlSb 2차원전자가스(2DEG) 소자는 Spinorbit-interaction의 값이 매우 커서 SPIN-FET 소자로 크게 주목받고 있다 [2]. 본 발표자들은 GaAs 기판위에 성장한 InAs 2DEG HEMT 소자의 전/자기적인 특성과 고속반응 물질로 주목 받는 InSb 박막소자의 doping 특성에 따른 전기적/물리적인 특성의 평가에 대해 그 결과를 소개하고자 한다. 격자정합과 Semi-insulating 기판의 부재로 상용화되어 있는 GaAs와 InP 기판위에 물질차이에 따른 고유의 한계 특성을 줄이기 위한 Pseudomorphic이라 불리는 특별한 박막 성장 기법을 적용하여 높은 전자 이동도를 가지며 spin length가 길어 Spin-FET로서 크게 주목받고 있는 InAs 2DEG HEMT 소자를 완성시켰다. 60,000 ($cm^2$/Vs) 이상의 높은 전자 이동도를 갖는 소자의 구현을 목표로 연구를 진행하였으며 1.8 K에서 측정된 Spin-orbit interaction의 값은 6.3e-12 (eVm)이다. InAs/InGaAs/InAlAs 및 InGaAs/InAlAs 구조의 InP 기반의 소자에서 보다 큰 값으로 향후 Spin-FET 응용에 크게 기대하고 있다. 또한, GaAs 기판위에 구현된 InSb 소자는 격자부정합 감소를 위해 InAs 양자점을 사용하여 약 $2.6{\mu}m$ 두께로 구현된 InSb 박막 소자는 상온에서 약 60,400 ($cm^2$/Vs)의 상온 전자이동도를 보였으며 현재 동일 두께에서 세계 최고결과(~50,000 $cm^2$/Vs)에 비해 월등하게 높은 값을 보이고 있다. Hall bar pattern 공정을 거쳐 완성된 소자는 측정 결과 10~20% 이상 향상된 전자 이동도를 보였다. 2e18/$cm^3$ 미만의 p-doping의 경우, 상온에서 n-type 특성을 보이나, 저온에서 p-type으로 변하는 특성을 보였고 n-doping의 경우 5e17/$cm^3$까지는 전자 이동도만 감소하고, doping에 의한 효과는 크게 없었다. 1e18/$cm^3$의 높은 doping을 할 경우 carrier가 증가하는 것을 확인했다. 이상의 측정 결과로 Spin-FET 소자로서 아주 우수하다는 것을 확인할 수 있었고 n-/p- type이 특성을 고려한 high quality InSb 박막소자의 응용을 위한 중요한 정보를 얻을 수 있었다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.10
• /
• pp.1202-1208
• /
• 1988

The electron density and electronic states in n- AlGaAs/GaAs heterointerface are calculated by using classical- and quantum-mechanics, respectively. We examine the effects of spacer layer thickness and doping concentration in AlGaAs layer on 2DEG density. Also, the dependences of electronic states of 2DEG upon temperature and acceptor concentration in GaAs layer are investigated.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.15.2-15.2
• /
• 2006

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.51-51
• /
• 2009

In this paper, we proposed GaN trench Static Induction Transistor(SIT). Because The compound semiconductor had superior thermal characteristics, GaN and SiC power devices is next generation power semiconductor devices. We carried out modeling of GaN SIT with 2-D device and process simulator. As a result of modeling, we obtained 340V breakdown voltage. The channel thickness was 3um and the channel doping concentration is 1e17cm-3. And we carried out thermal characteristics, too.