• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.82-86
• /
• 2010

In this paper, a power amplifier module for WCDMA base-station applications is designed and implemented using GaN field-effect transistors (FETs), which uses an envelope tracking bias system. The designed module consists of an high gain MMIC amplifier, a driver amplifier, a power amplifier, and bias circuits for envelope tracking applications. Especially, a FET bias sequencing circuit and two isolators are integrated for stable RF operations. All circuits are assembled within a single housing, so its dimension is just $17.8{\times}9.8{\times}2.0\;cm3$. Measured results show that the developed power amplifier module has good envelope tracking capability: the power-added efficiency of 35% at the output power range from 30dBm to 40dBm over a wide range of drain bias.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.286-297
• /
• 2017

This paper is a study of 6~18 GHz wideband high power amplifier which is composed of 10 single amplifier and coaxial type spatial power combiner. The property of this spatial power combiner is on a similar principle to antipodal antenna radiation mechanism. Therefore, the key structure of proposed spatial power combiner is the antipodal finline PCB board and the finline curve shape is numerically synthesized by using Klopfensein's optimum impedance taper. The measured CW output power of spatial combined high power amplifier is nearly 50 W. In conclusion we prove the good combining performance between the spatial power combiner and 10 single amplifier over 6~18 GHz frequency ranges. Also, we developed the key component PA and MFC MMIC which controls the phase and gain of the each amplifier, The main characteristic of MFC MMIC is to maximize combining efficiency of power amplifier.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.301-306
• /
• 2015

An ultra-compact and wideband low noise amplifier (LNA) in a quad flat non-leaded (QFN) package is presented. The LNA monolithic microwave integrated circuit (MMIC) is implemented in a $0.25{\mu}m$ GaN IC technology on a Silicon Carbide (SiC) substrate provided by Triquint. A source degeneration inductor and a gate inductor are used to obtain the noise and input matching simultaneously. The resistive feedback and inductor peaking techniques are employed to achieve a wideband characteristic. The LNA chip is mounted in the $3{\times}3-mm^2$ QFN package and measured. The supply voltages for the first and second stages are 14 V and 7 V, respectively, and the total current is 70 mA. The highest gain is 13.5 dB around the mid-band, and -3 dB frequencies are observed at 0.7 and 12 GHz. Input and output return losses ($S_{11}$ and $S_{22}$) of less than -10 dB measure from 1 to 12 GHz; there is an absolute bandwidth of 11 GHz and a fractional bandwidth of 169%. Across the bandwidth, the noise figures (NFs) are between 3 and 5 dB, while the output-referred third-order intercept points (OIP3s) are between 26 and 28 dBm. The overall chip size with all bonding pads is $1.1{\times}0.9mm^2$. To the best of our knowledge, this LNA shows the best figure-of-merit (FoM) compared with other published GaN LNAs with the same gate length.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.17-20
• /
• 2000

We have enhanced the yield of 0.25 ${\mu}{\textrm}{m}$ T-gate $Al_{0.25}$G $a_{0.75}$As/I $n_{0.2}$G $a_{0.8}$As P-HEMT using three-layer E-beam lithography process and selective etching process. The three-layer resist structure (PMMA/copolymer/ PMMA=2000 $\AA$/3000 $\AA$/2000 $\AA$) and three developers (Benzene：IPA=1：1,Methanol：IPA =1：1,MIBK：IPA=1：3) were used for fabrication of a wide-head T-gate by the conventional double E-beam exposure technology. Also 1 wt% citric acid： $H_2O$$_2$：N $H_{4}$OH(200m1：4ml：2.2ml) solution were used for uniform gate recess. The etching selectivity of GaAs over $Al_{0.25}$G $a_{0.75}$As is measured to be 80. So these P-HEMT processes can be used in X-band MMIC LNA fabrication.ion.ion.ion.

• ETRI Journal
• /
• v.26 no.4
• /
• pp.307-314
• /
• 2004

The application of a discrete pseudomorphic high electron mobility transistor (p-HEMT) as a grounded switch allows for the development of low cost phase shifters and phase modulators operating in a Ku band. This fills the gap in the development of phase control devices comprising p-i-n diodes and microwave monolithic integrated circuits (MMICs). This paper describes a discrete p-HEMT characterization and modeling in switching mode as well as the development of a low-cost four-bit phase shifter and direct quadrature phase shift keying (QPSK) modulator. The developed devices operate in a Ku band with parameters comparable to commercially available MMIC counterparts. Both of them are CMOS compatible and have no power consumption. The parameters of the QPSK modulator are very close to the requirements of available standards for satellite earth stations.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.53-58
• /
• 1996

In this paper, a simple fabrication technique of an air-bridge for interconnection of isolated electrodes of microwave active and passive devices and MMIC's is proposed. The proposed air-bridge proceses are mainly combinations of thermal evaporation, positive photoresist and image reversal processes for easy lift-off of up to 2.0 .mu.m thick metal. According to the resutls of air-birdge processes, it is confirmed that air-gap and thickness of theair-bridge are about 3.5.mu.m, and 2.0.mu.m, respectively. And it is also possible to make the fine air-bridge with widths of 5~60.mu.m and post-intervals of 25~200.mu.m withot collapse. finally, GaAs power MESFET's and rectangular spiral inductors are fabricatd and measured in order to confirm of feasibility of the proposed air-bridge processes. The MAG of the fabricated power MESFET's is 10dB at 10GHz, and the inductance of the (200.mu. * 6 turns) rectangular spiral inductors 4.5 nH inX-band.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.26-36
• /
• 2014

The needs of active phased arrays antenna system is getting more increased for IMT-Advanced system efficiency. The active phased array structure consists of lots of small transceivers and radiation elements to increase system efficiency. The minimized module of high efficiency transceiver is key for system implementation. The power amplifier of transmitter decides efficiency of base-station. In this paper, we design and implement minimized module of high efficiency transceiver for IMT-Advanced active phased array system. The temperature compensation circuit of transceiver reduces gain error and the analog pre-distorter of linearizer reduces implemented size. For minimal size and high efficiency, the implented power amplifier consist of GaN MMIC Doherty structure. The size of implemented module is $40mm{\times}90mm{\times}50mm$ and output power is 47.65 dBm at LTE band 7. The efficiency of power amplifier is 40.7% efficiency and ACLR compensation of linearizer is above 12dB at operating power level, 37dBm. The noise figure of transceiver is under 1.28 dB and amplitude error and phase error on 6 bit control is 0.38 dB and 2.77 degree respectively.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.76-79
• /
• 2010

본 논문에서는 고 효율 및 고 출력 특성을 가지는 질화갈륨(GaN) 소자를 이용하여 WiMAX 및 LTE System에 사용될 수 있는 DPD용 Pallet Amplifier를 제작하였다. 제작된 Pallet Amplifier는 Pre-drive로써 저 전류의 MMIC를 채택하고, Drive 단과 Main 단에 15W 급과 30W 급의 질화갈륨 소자를 사용 하였으며, 추가적인 효율 개선을 위해 PCB상에 Doherty Structure를 적용함으로써 보다 높은 효율을 구현하였다. 제작된 Pallet Amplifier는 음 전원 Bias 제어 회로, 온도에 따른 Gain 보상회로, Sequence 회로 및 Main 전원 Drop에 따른 보호 회로를 구현하였다. WiMAX Signal을 이용한 Modulation Power 10Watt Test에서 약 36.8~38.3%의 Pallet 효율과 DPD Solution인 TI GC5325SEK DPD Board 사용 시 ACLR은 약 46dBc 이상을 가지는 것으로 측정되었다. 본 논문에서 제작된 Pallet Amplifier는 Upper Band와 Lower Band로 나누어 제작되었던 기존 Pallet Amplifier와 달리 하나의 Pallet Amplifier로 2496~2690MHz에서 모두 사용하면서 종전에 사용되고 있는 Pallet Amplifier에 비해 Size가 최소 10% 이상 축소되어 효율 및 크기 면에서 종전 Pallet Amplifier보다 큰 이점을 갖는다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.569-577
• /
• 1999

A wideband RF receiver for satellite mobile communications system was fabricated and evaluated of performance in low noise amplifier and high gain amplifier. The low noise amplifier used to the resistive decoupling and self-bias circuits. The low noise amplifier is fabricated with both the RF circuits and the self-bias circuits. Using a INA-03184, the high gain amplifier consists of matched amplifier type. The active bias circuitry can be used to provide temperature stability without requiring the large voltage drop or relatively high-dissipated power needed with a bias stabilized resistor. The bandpass filter was used to reduce a spurious level. As a result, the characteristics of the receiver implemented here show more than 55 dB in gain, 50.83 dBc in a spurious level and less than 1.8 : 1 in input and output voltage standing wave ratio(VSWR), especially the carrier to noise ratio is a 43.15 dB/Hz at a 1 KHz from 1537.5 MHz.