• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.27-34
• /
• 2018

In this study, the generating of torque regarding the Control Moment Gyro (CMG) is proportional to the angular velocity of gimbal. This is the case because gimbal affects the attitude control of the satellite directly, and it is necessary to reduce the incidence of torque ripple of gimbal. In this paper, the cause of the torque ripple of gimbal is reviewed and mathematically modeled by assuming the friction imbalance of bearing, the magnetic field and the phase current imbalance of the motor. We are able to confidently estimate the modeling parameters of gimbal disturbance using a constant speed test, and then analyze the influence of applying feedforward control to our modeling. Additionally, the simulation results show that the torque ripple and angular velocity fluctuations are reduced when apply this modeling to the identified study parameters. Finally, we present the disturbance reduction technique using our disturbance modeling.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.49-56
• /
• 2018

As the era of the 4th industrial revolution comes, there is a growing interest in the use of UAVs. While various technologies are being developed using drones, controlling flight of drones is the most basic. Hovering control is essential in order to enable autonomous flight, especially during flight control of drones. In this paper, we design drones based on ATmega2560, Sonar, Optical Flow, and acceleration / gyro 6 axis sensor for drones hovering control, and developed horizontal control, altitude control, position tracking and fixed algorithm based on PID control. In this research, in order to measure the objective result of the drone, keeping the altitude immediately after the drone takes off according to the time, measure the movement value until the position is fixed and stable hovering is maintained and compared analyzed. Experimental results show that the drones can stably hover within 4cm horizontal and 2cm vertical from 50cm above the reference coordinates.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.171-182
• /
• 2019

Bicycles are a pollution-free means of transportation. In addition to leisure, the use of bicycles is increasing as alternative eco-friendly transportation. Accordingly, bicycle accidents are also increasing. The purpose of this study is to implement bicycle black box technology to identify situation when a bicycle accident occurs. Currently, bicycle black box products are mainly based on video cameras, and are commercially available by adding various functions mainly on high resolution cameras and are sold at high prices. If a bicycle accident occurs, quantitative data on the accident location at the time of the accident and the state of the bicycle at the time of the accident is required. In this study, IMU sensor used to obtain acceleration and slope, and time and coordinates are obtained. In addition, real-time acceleration and tilt data while is stored in memory card and by using Bluetooth transmit to the smart phone owned by the in real time to prevent accidents and to monitor status.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.7-13
• /
• 2017

This study will provide a practical plan of engineering education through the study of major activities connected with the production of works to accomplish the graduation conditions by completing the comprehensive design subject and the result of the performance. The designed subject is to measure the minimum safety distance during driving using the obstacle detection function of the ultrasonic sensor and to perform the avoidance algorithm based on the measurement value of the acceleration gyro sensor. It is proposed an access surveillance system that minimizes the damage of drones, surrounding objects, and people, and improves air mobility. Experimental results show that the obstacles around the drone are detected by five ultrasonic sensors and the difference of output value is applied to each motor of the drone and obstacle avoidance is confirmed. In addition, the content and level of the data for measuring the achievement of learning achievement in the engineering education certification program were used and the results were confirmed to be consistent with the description of the engineering problem level required for the graduates of 4-year engineering college.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.952-960
• /
• 2018

Recently, lots of remote sensing satellite require agility to collect more images within the limited time frame. To satisfy this kind of mission requirement, high torque actuator such as CMG is an essential element. In this study, 5Nm class small CMG developed by KARI is introduced to implement for an agile small satellite design. One of the singularity escape CMG steering law, Designated Direction Escape (DDE) method, which is a sort of modified version of Singular Direction Avoidance (SDA) method is summarized for its application on the numerical simulation of agile attitude control system design result. The performance of DDE method is demonstrated properly by escaping well known elliptic internal singularity successfully. 5Nm class small CMG cluster in a pyramid type as well as a roof type configuration is utilized to perform the numerical simulation and to demonstrate its agility design result for a small satellite. Simulation result shows the properness of 5Nm small CMG to a small agile satellite system. Also, the simulation result provides some valuable information that is important to CMG hardware design and manufacturing.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.1
• /
• pp.20-29
• /
• 2021

This study developed a smartwatch and a wind speed system in accordance with the necessity of a device that provides the information required in marine leisure. Based on a marine leisure smartwatch with a multi-sensor, a gyro box, and a wind speed system, external data such as GPS, motion, humidity, temperature, air pressure, and heart rate can be collected. In addition, the collected external environment data can be managed through an application on a smartphone, which is an Android-based mobile device. The developed smartwatch and wind speed system are expected to contribute to increasing accessibility and revitalization of the marine leisure industry. In addition, in terms of safety and education, the need for a device that provides marine information is large, so it is expected to increase the possibility of entering the high value-added market and improve the product localization rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1224-1230
• /
• 2020

Since the spread of smart phones, interest in wearable devices has increased and diversified, and is closely related to the lives of users, and has been used as a method for providing personalized services. In this paper, we propose a method to detect the user's behavior by applying information from a 3-axis acceleration sensor and a 3-axis gyro sensor embedded in a smartphone to a convolutional neural network. Human behavior differs according to the size and range of motion, starting and ending time, including the duration of the signal data constituting the motion. Therefore, there is a performance problem for accuracy when applied to a convolutional neural network as it is. Therefore, we proposed a Time-Division Feature Fusion Convolutional Neural Network (TDFFCNN) that learns the characteristics of the sensor data segmented over time. The proposed method outperformed other classifiers such as SVM, IBk, convolutional neural network, and long-term memory circulatory neural network.

• Journal of Creative Information Culture
• /
• v.7 no.4
• /
• pp.235-242
• /
• 2021

Recently, many human activity recognition(HAR) researches using smartphone sensor data have been studied. HAR can be utilized in various fields, such as life pattern analysis, exercise measurement, and dangerous situation detection. However researches have been focused on recognition of basic human behaviors or efficient battery use. In this paper, exercising activities performed indoors and outdoors were defined and recognized. Data collection and pre-processing is performed to recognize the defined activities by SVM, random forest and gradient boosting model. In addition, the recognition result is determined based on voting class approach for accuracy and stable performance. As a result, the proposed activities were recognized with high accuracy and in particular, similar types of indoor and outdoor exercising activities were correctly classified.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.225-233
• /
• 2023

This paper implements a system that monitors human body lifting information in the event of a marine accident. The monitoring system performs ultrasonic communication through a lifting device controller that transmits underwater environment information, and LoRa communication is performed on the water to provide GPS information within 10 km to the control center or mother ship. The underwater lifting controller transmits pneumatic sensor, gyro sensor, and temperature sensor information. In an environment where the underwater conditions increase by one atmosphere of water pressure every 10m in depth, and the amount of air in the instrument decreases by half compared to land, a model of a 60kg underwater mannequin is used. Using one 38g CO2 cartridge in the lifting appliance SMB(Surface Maker Buoy), carry out a lifting appliance discharge test based on the water level rise conditions within 10 sec. Underwater communication constitutes a data transmission environment using a 2,400-bps ultrasonic sensor from a depth of 40m to 100m. The monitoring signal aims to ensure the safety and safe human structure of the salvage worker by providing water depth, water temperature, and directional angle to rescue workers on the surface of the water.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.300-305
• /
• 2023

In this paper, we confirmed that an efficient sensor network can be established at a low cost by applying Geofencing technology to a LoRa-based sensor network and verified its effectiveness in disaster management such as forest fires. We detected changes through GPS, gyro sensors, and combustion detection sensors, and defined the validity size of the Geofencing cell accurately. We proposed a LoRa Payload Frame Structure that has a flexible size according to the size of the sensor information.