• 제목/요약/키워드: GTO

검색결과 171건 처리시간 0.026초

Analysis of a Harmonics Neutralized 48-Pulse STATCOM with GTO Based Voltage Source Converters

  • Singh, Bhim;Saha, Radheshyam
    • Journal of Electrical Engineering and Technology
    • /
    • 제3권3호
    • /
    • pp.391-400
    • /
    • 2008
  • Multi-pulse topology of converters using elementary six-pulse GTO - VSC (gate turn off based voltage source converter) operated under fundamental frequency switching (FFS) control is widely adopted in high power rating static synchronous compensators (STATCOM). Practically, a 48-pulse ($6{\times}8$ pulse) configuration is used with the phase angle control algorithm employing proportional and integral (PI) control methodology. These kinds of controllers, for example the ${\pm}80MVAR$ compensator at Inuyama switching station, KEPCO, Japan, employs two stages of magnetics viz. intermediate transformers (as many as VSCs) and a main coupling transformer to minimize harmonics distortion in the line and to achieve a desired operational efficiency. The magnetic circuit needs altogether nine transformers of which eight are phase shifting transformers (PST) used in the intermediate stage, each rating equal to or more than one eighth of the compensator rating, and the other one is the main coupling transformer having a power rating equal to that of the compensator. In this paper, a two-level 48-pulse ${\pm}100MVAR$ STATCOM is proposed where eight, six-pulse GTO-VSC are employed and magnetics is simplified to single-stage using four transformers of which three are PSTs and the other is a normal transformer. Thus, it reduces the magnetics to half of the value needed in the commercially available compensator. By adopting the simple PI-controllers, the model is simulated in a MATLAB environment by SimPowerSystems toolbox for voltage regulation in the transmission system. The simulation results show that the THD levels in line voltage and current are well below the limiting values specified in the IEEE Std 519-1992 for harmonic control in electrical power systems. The controller performance is observed reasonably well during capacitive and inductive modes of operation.

단위 인버터 병렬운전에 의한 발전소 해수펌크 적용 (Studies on the Application of Unit-inverter Parallel Operation to Sea-water Lift Pump in Power Plant)

  • 김수열;류홍우
    • 전력전자학회논문지
    • /
    • 제3권1호
    • /
    • pp.1-7
    • /
    • 1998
  • 발전설비의 대형화로 인하여 전력절감 문제가 크게 대두되었고, 팬이나 펌프를 부하 변화에 따라 속도제어하므로써 전기 에너지를 절약 할 수 있다. 1MVA급 단위 인버터 2대를 병렬 운전하여 대용량 2MVA GTO 인버터를 구현하였으며, 단위 인버터의 병렬 운전은 2대의 출력변압기 2차측 결선을 직렬 연결하여 구현하였다. 개발된 시스템은 제어반, 정류기반, 2대의 인버터반으로 구성되어 있으며, 이 시스템은 한국전력공사 성인천복합화력발전처 해수펌프 구동 유도전동기(6.6KV 1500KW)에 적용되어 전력절감에 기여하고 있다. 또 단위 인버터가 상호 180$^{\circ}$위상차를 갖도록 병렬 운전하므로써 고조파 성분을 저감시키면서 대용량을 구현하였다.

항불안제로서의 Benzodiazepine계 약물의 위치

  • 오강섭
    • 대한불안의학회:학술대회논문집
    • /
    • 대한불안의학회 2005년도 추계학술대회 및 대한정신약물학회 추계연수교육
    • /
    • pp.80-91
    • /
    • 2005
  • o Benzodiazepines can be effective in treating Anxiety Disorders o Efficacy of Benzodiazepines varies across Anxiety Disorders o Proper diagnosis is important before prescribing o Consider Side effects and withdrawal symptoms o Periodic Evalustion of Risk/Benefit of BZ o Advised gto use proper dose, duration for indicated Anxiety Disorders

  • PDF

Ortho-normalized Gaussian Type Orbitals

  • Jee, Jong-Gi
    • Bulletin of the Korean Chemical Society
    • /
    • 제7권2호
    • /
    • pp.99-102
    • /
    • 1986
  • The conventional Gaussian type orbitals (GTO's) were generalized to have a regular form which is similar to the conventional Slater type orbitals (STO's). They were also orthogonalized and orthonormalized to have the same number of radial nodes that the hydrogenic orbitals have.

직렬 연결된 GTO로 구성된 멀티레벨 인버터에 적합한 새로운 회생 스너버에 관한 연구 (A Novel Regenerative Snubber suitable to Multi-Level Inverters with Series-Connected GTOs)

  • 채균;조국춘;정구호;류태하;조규형
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 A
    • /
    • pp.585-587
    • /
    • 1996
  • A simple regenerative snubber structure is proposed, which is applicable to multi-level inverter with series-connected GTOs for high power applications. The novel snubber structure can solve large energy loss problems and guarantee safe operation of power converter can be achieved. The proposed new snubber has the potential of high performance and high reliability and is particularly suitable to high power and multi-level application with series connected power devices. The snubber voltage and current waveforms are analized and shown the simulation and experimental results for a GTO 3-level inverter circuit with inductive load.

  • PDF

BIPV시스템의 건물적용 실증에 대한 구성요소별 발전성능 분석 (A study on the performance of various BIPV modules applied in a real building demonstration)

  • 이상문;허정호
    • 한국태양에너지학회 논문집
    • /
    • 제36권2호
    • /
    • pp.53-63
    • /
    • 2016
  • Building Integrated Photovoltaic (BIPV) is one of the best ways to generate electric power using the solar energy, which is clean and inexhaustible energy resources. The most of BIPV modules have the form of GtoG (Glass to Glass) photovoltaic in building applications. Degradation leading to failure in photovoltaic modules is very important factor in BIPV modules. This paper analyzed the performance of various BIPV modules through outdoor exposure tests. Performance of three BIPV modules(c-Si type, a-Si type and DSSC type) with three installation angles influenced by sun light, outdoor temperature, and wind velocity was monitored and analyzed. As a result, c-Si type BIPV module outperforms other BIPV modules(a-Si type). In terms of power efficiency of the module, the installed angle of $45^{\circ}$ is better than others(90 degree, 0 degree). In addition, more realistic data of various BIPV system performance could be available through the field test and integrated building test. In this study, relationship of the BIPV system is identified module's installation angle, power generation, architectural performance, etc.

시스템 구성에 따른 정지궤도 발사체의 임무성능 비교 (Comparison of the Mission Performance of Korean GEO Launch Vehicles for Several Propulsion Options)

  • 홍미르;양성민;김혜성;윤영빈;최정열
    • 한국추진공학회지
    • /
    • 제21권2호
    • /
    • pp.60-71
    • /
    • 2017
  • 정지궤도 발사체의 시스템 옵션별 성능 해석을 위하여 3자유도 궤적모델을 이용한 궤도 해석 프로그램을 작성하였다. 이 프로그램을 이용하여 추진제의 종류와 엔진방식, 클러스터링 수, 그리고 발사장 위치 등을 옵션으로 두고 발사궤적과 정지천이궤도 투입성능을 추정하였다. 해석의 결과를 통하여 국내 발사장을 이용하여 임무 달성을 가능케 하는 다양한 설계 방안의 가능성과 함께 정지궤도 발사체의 설계 방향을 파악할 수 있었다.

고내압$\cdot$대용량 파워디바이스의 기술동향

  • 대한전기협회
    • 전기저널
    • /
    • 통권277호
    • /
    • pp.63-68
    • /
    • 2000
  • 요 몇 해 사이에 고내압$\cdot$대용량 파워디바이스에서는 아주 새로운 진전이 일어나고 있다. 파워일렉트로닉스 장치의 소형화$\cdot$고효율화 및 제어의 고속화 등의 요구에 응할 수 있는 차세대의 새로운 소자가 출현하여 그 제품화가 비약적으로 진전되고 있는 것이다. 새로운 파워디바이스의 대표적인 것으로는 다음의 3가지를 들 수 있다. $\cdot$HVIGBT(High Voltage Insulated Gate Bipolar Transistor Module)$\cdot$HVIPM(High Voltage Intelligent Power Module)$\cdot$GCT(Gate Commutated Turn-off)사이리스터 이들의 파워디바이스를 종래의 GTO(Gate Turn-off) 사이리스터와 비교해 보면 다음과 같은 특징이 있다.(1)GTO 사이리스터가 필요로 했던 스나버회로가 없어도(Snabber-less)턴오프가 가능하며, di/dt 억제용 아노드리액터의 생략 또는 저감이 가능하기 때문에 반도체 부녀회로의 소형화를 기할 수 있다. (2)게이트파워와 전체손실(소자 및 주변회로를 포함)의 저감으로 에너지 절약을 도모할 수 있다. (3)스위칭주파수를 2$\~$3kHz 정도까지 높일 수 있다. 이런 장점 때문에 다음과 같은 용도에의 적용이 기대되고 있다. (1)신간선, 지하철 등의 전철 응용 (2)액티브필터, SVG(무효전력발생장치), SVC(무효전력보상장치) BTB, 가변속 양수발전 스위치 등의 전력응용 (3) 철강압연이나 제지공장용 등의 대용량공업용 컨버터$\cdot$인버터 응용 HVIGBT와 HVIPM은 전철분야에서 신간선의 추진용 컨버터$\cdot$인버터장치와 보조전원장치, 그리고 지하철의 추진용 인버터 장치나 보조전원장치 등에 채용되고 GCT 사이리스터는 전력용 주파수변환기 등에 실용화되고 있다.

  • PDF

몬테카를로방법을 이용한 천리안위성 궤도전이 소요추진제량 추정에 관한 연구 (COMS GTO Injection Propellant Estimation using Monte-Carlo Method)

  • 박응식;허환일
    • 한국항공우주학회지
    • /
    • 제43권1호
    • /
    • pp.62-71
    • /
    • 2015
  • 정지궤도위성은 궤도상에서 위치변화를 제어하기 위해 추력기를 사용하고 운용수명에 맞추어 적정한 양의 액체추진제를 탑재한다. 그러므로 정지궤도위성의 수명은 추진제 잔여량에 좌우되고 정확한 잔여추진제량 측정은 조기 수명종료로 야기되는 경제적 손실을 완화시킬 뿐만 아니라 후속위성의 대체나 위성망 운용계획 등에 매우 중요하다. 잔여추진제량을 측정하는 방법은 주로 PVT 방법, 열질량법, 회계식 방법이 사용된다. 본 논문에서는 회계식방법을 사용하기 위한 천리안위성 이원추진시스템의 모델링과 몬테카를로 방법을 이용하여 천리안위성의 궤도전이 소요 추진제량을 분석하였다.