• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.75-85
• /
• 2002

The introduction of GPS technique in transportation study make real time tracking of driving vehicle's position possible. Position information data gauged with three dimension(X, Y, Z) can be achieved with time-continuity and from more than two driving vehicles. For this field of study, in past day, there were many difficulties in collecting real time data, but now, it becomes easy thanks to this. But for the resonable result analysis, fully understanding of GPS data-accuracy must be proceeded. Because accompanied magnitude of error depends on the study's accuracy. For this reason, this study surveyed the GPS data's error and suggest calibrate technique. This study's result will be helpful for following studies using DGPS data. For this, this study takes two types study in road, and set triangulation coordinates, and compare it with GPS data. DGPS data contains less than 0.6m's error.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.251-261
• /
• 2003

To measure the GPS position accuracy and its distribution according to the length of the baseline, 30 minutes to 24 hours observations at the fixed location were conducted with two GPS receivers (Ll, 12 channels) on May 29 to June 2, 2002. The GPS data received at the reference station, the rover station and the ordinary times GPS observation station operated by the National Geography Institute in Korea were processed in kinematic and static post-processing methods with a post -processing software. The results obtained are summarized as follows: 1. The number of the satellite that could be observed continuously more than six hours was 16 and most of these satellites were positioned at east-west direction on May 31, 2002. The number of the satellite observed and the geometric dilution of precision (GDOP) determined by the average of every 10 minute for the day were 8 and 3.89, respectively. 2. Both the average GPS positions before and after post-processing were shifted (standalone: 1.17 m, post -processing: 0.43m) to the south and west. The twice distance root mean square (2drms) measured with standalone was 6.65m. The 2drms could be reduced to 33.8% (standard deviation 0=17.2) and 5.3% (0=2.2) of standalone by the kinematic and the static post-processing methods, respectively. 3. The relationship between the length of the baseline x (km) and the 2drms y (m) obtained by the static post-processing method was y=0.00l6x+0.006 $(R^2=0.87)$. In the case of the positioning with the static post-processing method using the GPS receiver, it was found that a positioning within 20cm 2drms was possible when the length of the baseline was less than 100km and the receiving time of the GPS is more than 30 minutes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.59-65
• /
• 2012

The study conducted the measurement of RTK-GPS with changing the number of observation as the method to differ reference stations of RTK-GPS. Also it aimed to suggest an effective application plan for cadastral surveying based on the accuracy analysis accordingly. According to the result of selecting the study region, observing with different reference stations, and comparing with previous TS performance, the 1st reference station was calculated as ${\pm}0.024m$ for x-coordinate's RMSE and ${\pm}0.029m$ for y-coordinate's RMSE, and the 2nd reference station was calculated as ${\pm}0.040m$ for x-coordinate's RMSE and ${\pm}0.029m$ for y-coordinate's RMSE. All these results (the 1st and the 2nd reference stations) are allowed as acceptable performance within the margin of error according to the existing cadastral regulations, and there was no significant difference between two performances. Therefore, unless there was no problem in receiving GPS satellite data, it would be possible to secure stable performance enough with 1 observation. Depending on surveying environment that has possible problems in receiving data, however, 2 or more observations would be necessary to secure stable performance.

• Journal of Environmental Science International
• /
• v.25 no.11
• /
• pp.1493-1498
• /
• 2016

The efficiencies of Gang-Byeon sewage treatment facilities, which are based on GPS-X modelling, were analysed and used to design recycle water treatment processes. The effluent of an aeration tank contained total kjeldahl nitrogen (TKN) of 1.8 mg/L with both C-1 and C-2 conditions, confirming that most ammonia nitrogen ($NH_3{^+}-N$) was converted to nitrate nitrogen ($NO_3{^-}-N$). The concentrations of $NH_3{^+}-N$ and $NO_3{^-}-N$ were found to be 222.5 and 227.2 mg/L, respectively, with C-1 conditions and 212.2 and 80.4 mg/L with C-2 conditions. Although C-2 conditions with higher organic matter yielded a slightly higher nitrogen removal efficiency, sufficient denitrification was not observed to meet the discharge standards. For the total nitrogen (T-N) removal efficiency, the final effluent concentrations of T-N were 293.8 mg/L with biochemical oxygen demand (BOD) of 2,500 mg/L, being about 1.5 times lower than that (445.3 mg/L) with BOD of 2,000 mg/L. Therefore, an external carbon source to increase the C/N ratio was required to get sufficient denitrification. During the winter period with temperature less than $10^{\circ}C$, the denitrification efficiency was dropped rapidly even with a high TKN concentration (1,500 mg/L). This indicates that unit reactors (anoxic/aerobic tanks) for winter need to be installed to increase the hydraulic retention time. Thus, to enhance nitrification and denitrification efficiencies, flexible operations with seasons are recommended for nitrification/anoxic/denitrification tanks.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.31-39
• /
• 2007

As the availability of images from airborne digital camera with high resolution is expanded, a lot of concern are shown about the production of orthoimage and digital map. This study presents the method of updating digital map using orthoimage from airborne digital camera image. Images were georectified using GPS surveying data. For the generation of orthoimage, Lidar DEM was used. The absolute positional accuracy of orthoimage was evaluated using GPS surveying data. And that of the building layer of digital map was estimated using the existed digital map at the scale of 1:1,000. The absolute positional accuracy of orthoimage was as followed: RMSE in X and Y were ${\pm}0.076m$ and ${\pm}0.294m$. The RMSE of the building layer were ${\pm}0.250m$ and ${\pm}0.210m$ in X and Y directions, respectively. The RMSE of the digital map using orthoimage from Aerial Digital Camera image fell within allowable error range established by NGII. Consequently, updating digital map using orthoimage from Aerial Digital Camera image can be applied to various fields including the construction of the framework data and the GIS of local government.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.105-108
• /
• 2011

본 연구에서는 기준국을 달리함으로써 관측 횟수를 달리하여 RTK-GPS 측량을 시행하여 보고 이에대한 정확도 분석을 토대로 지적측량에 효율적인 적용 방안을 제시하여 보고자 하였다. 실험지역을 선정하고 기준국을 달리하여 관측 후 기존 TS 성과와 비교한 결과, 제1기준국은 X좌표의 RMSE가 ${\pm}0.024m$, Y좌표의 RMSE가 ${\pm}0.016m$로 산출되었고, 제2기준국은 X좌표의 RMSE가 ${\pm}0.040m$, Y좌표의 RMSE가 ${\pm}0.029m$로 산출되었다. 이는 모두 현행 지적법령에서 규정하고 있는 성과인정 범위 이내의 오차이고, 더불어 두 성과의 차이는 크지 않았다. 따라서 GPS 위성자료 수신에 장애가 없다면 1회 관측으로도 충분히 안정적인 성과의 취득이 가능한 것으로 나타났다. 다만, 측량 환경에 따라 주변에 수신에 제약을 받는 요소가 있다면 이러한 지역에 대해서는 성과의 안정적인 취득을 위해 2회 이상의 관측이 필요할 것으로 판단된다.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.77-86
• /
• 2006

Aplications of the real-time kinematic GPS surveying and inertial measurement unit have been beingRTK GPS allows the use of a static base station and remote rover unit to allow for data collectionwithin several seconds and in real time. It is useful for monitoring the behaviors of massive structureslike bridges. And this study purposed to implement a method of deciding the acurate dynaimc attitudeof structures by IMU. In this study, among GPS methods, we used RTK GPS to analyze the precisionof monitoring and then on the basis of it, we developed a monitoring system using RTK GPS anda deviation betwen observation values, X axis was 1mm, Y axis was 1mm and Z axis 2.2mm. I tturned out that it was possible to monitor and measure structures by RTK GPS and IMU.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.165-169
• /
• 2008

It has been reported that most wastewater treatment plants have difficulties in nitrogen removal during winter season due to declined activity of nitrifiers in the condition of low temperature. This study was conducted in order to find out optimum operating condition for efficient nitrogen removal in low temperature. A series of operating conditions with various HRTs of each tank were simulated using the GPS-X program. The optimum HRT combination for effective nitrogen removal was 0.3 hr/0.5 hr/1.36 hr/4.84 hr(PreAx/An/Ax/Ox) with 51.4% of T-N removal efficiency and 57.3% of $NH_4^+$-N removal efficiency.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.181-191
• /
• 2015

In the present study, the 2013 survey Uiwang pointed out how the Resurvey of Cadastre ed projects reviewed relation to the business carried GPS-RTK (Network, Single) and total station surveying (T/S) to analyze and to compare the performance of Time Measurement Accuracy urban areas Resurvey of Cadastre was to present an effective survey methods in the business district. In this study, Uiwang review survey results indicated a comprehensive evaluation of the results, which are concentrated in urban areas, the building of intelligent review of GPS-RTK surveying methods is avoided by the measurement method to establish the first principles method based on total station surveying the GPS-RTK survey to draw conclusions appropriated to take advantage of the assistance and inspection methods.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.651-659
• /
• 2009

There are a great number of man-made and natural slopes in many parts of the world including Hong Kong and Mainland China. For example, there are over 40,000 slopes in Hong Kong registered by the Hong Kong Government. Landslides due to slope failures can often cause catastrophes that involve the loss of both lives and important facilities. GPS has been demonstrated to have great potentials for use in monitoring slope stability and landslides. However, the high hardware cost of GPS has limited the wide spread use of GPS for such applications. The multi-antenna GPS technology initiated by the research group and our collaborators has significantly reduced the cost of GPS and provided a solution to a number of associated problems such as data management and power supply. This paper discusses practical applications of multi-antenna GPS technology in slope monitoring, including system design, setting up, data transmission and management, and data quality analysis and control. Some slope monitoring examples are given to illustrate the points discussed.