• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.244-245
• /
• 2008

본 논문은 관성센서를 이용한 무인 항공체의 자세 제어에 관한 연구를 다루었다. 항공계의 종류는 크게 고정익기와 회선익기로 나뉘는데 본 연구에서는 회전익기의 형태를 가진 Quarter Vehicle을 사통하였다. Quarter Vehicle은 4개의 프로펠러에 의한 양력과 회전 반발력으로 비행을 한다. 이때의 양력은 수평면에 대해 수직으로 추력을 발생시키므로 다른 비행체보다 불안정하며 이를 안정하게 제어하기 위해 관성 센서를 적용하여 균형을 유지한다. 본 연구에서는 관성센서를 이용하여 UAV의 자세와 균형을 안정적으로 유지하여 안정적인 비행이 가능하도록 하였다. 또한 상호 의존적인 항법 시스템으로 환경변화에 영향을 받지 않으며, 정확한 위치정보를 제공하는 GPS를 사용하여 3개 이상의 위성으로부터 정보를 받아 좌표를 계산하고 위치, 속도 및 방향을 결정하여 자율 비행이 가능하도록 설계하였다. 본 논문에서는 Quarter Vehicle의 구조와 이론적 배경을 통한 설계, 그리고 관성센서와 GPS의 적용을 위한 방법을 제시 한다.

• Journal of Positioning, Navigation, and Timing
• /
• v.1 no.1
• /
• pp.7-14
• /
• 2012

Due to inaccurate safe navigation estimates, maritime accidents have been occurring consistently. In order to solve this, the precise positioning technology using carrier phase information is used, but due to high buildings near inland waterways or inclination, satellite signals might become weak or blocked for some time. Under this weak signal environment for some time, the GPS raw measurements become less accurate so that it is difficult to search and maintain the integer ambiguity of carrier phase. In this paper, a method to generate code and carrier phase measurements under this environment and maintain resilient navigation is proposed. In the weak signal environment, the position of the receiver is estimated using an inertial sensor, and with this information, the distance between the satellite and the receiver is calculated to generate code measurements using IGS product and model. And, the carrier phase measurements are generated based on the statistics for generating fractional phase. In order to verify the performance of the proposed method, the proposed method was compared for a fixed blocked time. It was confirmed that in case of a weak or blocked satellite signals for 1 to 5 minutes, the proposed method showed more improved results than the inertial navigation only, maintaining stable positioning accuracy within 1 m.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.48-54
• /
• 2020

Researchers recognized air pollution changes causing diseases and difficulties in living due to environmental pollution following various human activities, and have studied how to avoid fine dust harmful to the human respiratory system to be healthy. To this end, Arduino is used to equip fine dust level sensors in drones to measure the fine dust levels, visualize the measurements with LED indicator colors depending on the measurements to inform users of the danger of fine dust, and use the benefits of drones to specify dangerous fine dust zones and measure the fine dust levels. Users can see the changes depending on the fine dust levels in real time with the LED indicators. This will contributes to measuring fine dust levels easily in dangerous areas. Mission Planner (ArduPilot) is used to set up the GPS of drone, and store the data from the dust sensor as contents. This study aims to establish a method for improving the environment to measure fine dust levels with drones with LED indicators for fine dust, and reduce fine dust.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.167-175
• /
• 2018

Despite the rapid development of IT technology, people with visual impairments still use simple forms of walking sticks and need more advanced walking aids. Smart Cane, which is developed based on Internet service and sensor, can provide high safety and convenience compared to existing sticks for visually impaired people by conveying peripheral information and walking situation to these visually impaired people through voice and vibration. In this paper, we propose and implement SmartKane to overcome lack of miniaturization, user friendly form, and sensing sensitivity, which have been pointed out as a problem of existing SmartKane.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.6
• /
• pp.1495-1502
• /
• 2015

Dashboard camera is important system to store the variable data that not only video but also non-visual information that state of vehicle such as accelerometer, speed, direction. Non-visual information include variable data that can't visualization, so it used important evidence to figure out the situation in accident. It could be missed to non-visual information what can be prove the case in the just digital video forensic procedure. In this paper, We proposal the digital forensic analysis procedure for dashboard camera to all data in dashboard camera extract and analysis data for investigating traffic accident case. And I analyze to some products in with this digital forensic analysis procedure.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.329-333
• /
• 2008

As construction projects become getting bigger and complicated, the importance of resource management in construction sites is to be emphasized all the more than ever, but the reality is now gone far away leaving data filing and management dependent on the hands of in-field managers, which gives rise to a variety of problems such as decreased productivity. The manually-dependent data management makes it hard to acquire data and information needed for projects both quickly and correctly with abundant cost and endeavor by accumulating the related data, and efficient project management, being exemplified by such practical applications as Bar-code, RFID(Radio Frequency Identification), GPS(Global Positioning System), PDA(Personal Digital Assistants), USN(Ubiquitous Sensor Network) and DAT(Data Acquisition Technology). In this context literature survey is made theoretically, taken into account 14 classification of construction works, 31 types of work classification in CIS, Masterformat as follows;

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.77-81
• /
• 2006

GPS cannot determine random errors such as multipath and signal cutoff caused by surrounding environment that determines the visibility of satellites and the speed of data creation and transmission is lower than the speed of vehicles, it is difficult to determine accurate dynamic positions. Thus this study purposed to implement a method of deciding the accurate dynamic position of vehicles by combining AHRS (Attitude Heading Reference System) IMU (Initial Measurement Unit) based on low-priced MEMS (Micro Electro Mechanical System) in order to provide the information of attitude, position and speed at a high transmission rate without external help. This study conducted an initialization test to decide dynamic position using AHRS IMU sensor, and derived attitude correction angles of vehicles against time through regression analysis. The roll angle was $y=(A{\times}10^{-6})x^2 -(B{\times}10^{-5})x+Cr{\times}10^{-2}$ and the pitch angle was $y=(A{\times}10^{-6})x^2-(B{\times}10^{-7})x+C{\times}10^{-2}$, each of which was derived from second-degree polynomial regression analysis. It was also found that the heading angle was stabilized with variation less than $1^{\circ}$ after 60 seconds.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.488-493
• /
• 2006

Accurate river discharge is the most important factor in managing river basins and for successfully maintaining total maximum daily loads in Korea. It is not easy to measure the discharge directly in large rivers owing to physical and environmental constraints, even after investing much time and money. Recently, to overcome these historical drawbacks in river discharge measurement, we have developed the Automatic Discharge Acquisition & Management System (ADAMS) that scans the river cross-section and measures each cell $(1m{\times}1m)$ velocity using HADCP. The hardware system is composed of an HADCP sensor and winch, as well as a PC and software system for the discharge calculation module and hardware control module. It is controlled remotely via the internet and uses the velocity-depth integration method and the velocity-contour method for calculating river discharges. The characteristics of ADAMS are a ubiquitously accessible system, featuring real time automatic discharge measurement, remote control via the internet. The results using ADAMS at the Jindong stage site show less than 5% uncertainty and are 4 times more efficient than the ADCP & Q-boat system. This system can be used to measure any large river, river mouth or tributary river affected by backwater, all of which have a very difficult measuring real time discharge. The next generation of ADAMS will feature an upgrade to increase portability and GPS integration.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.498-509
• /
• 2015

The existing mobile antenna networks in the military use have been operated by the manual pointing between two antennas. The work presented here describes the study of ATPC(Automatic Tracking and Pointing Control) system between facing antennas and the related tracking and pointing performances. This system is able to automatically track the maximum RSSI(Received Signal Strength Indication) value from the source's RF(Radio Frequency) signal and then control for maintaining the LOS(Line of Sight) between two antennas. The system has three major units; the driving unit consisting of motors, harmonic drives and encoders, the sensor unit with a GPS(Global Positioning System) and AHRS(Attitude and Heading Reference System) and the control unit regulating all the tracking and pointing events. By using PI(Proportional and Integral) controller, this system is able to properly track and point the other antenna under the external disturbance like the wind load. Both the simulation and the experimental works have been successively carried out to prove the performances of the system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.483-489
• /
• 2015

In this paper, we propose monocular visual simultaneous localization and mapping (SLAM) in the large-scale environment. The proposed method continuously computes the current 6-DoF camera pose and 3D landmarks position from video input. The proposed method successfully builds consistent maps from challenging outdoor sequences using a monocular camera as the only sensor. By using a binary descriptor and metric-topological mapping, the system demonstrates real-time performance on a large-scale outdoor dataset without utilizing GPUs or reducing input image size. The effectiveness of the proposed method is demonstrated on various challenging video sequences.