• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.343-349
• /
• 2006

In order to enhance the robustness against noisy environment, the previous GPS initial synchronization method of DGPS reference stations adopts not only the coherent integration method but also the non-coherent integration method. However the previous GPS initial synchronization method muses the non-coherent integration loss, which is a dominant factor among the signal acquisition losses in noisy environment. And the non-coherent integration loss increases with the strength of noise signal. In this paper, a novel GPS initial synchronization method is proposed for robust DGPS reference stations in noisy environment. This paper presents that the proposed GPS initial synchronization method suppresses the non-coherent acquisition loss. Furthermore, with regard to the mean acquisition time, it is shown that the number of the search cells of the proposed GPS initial synchronization method is much smaller than that of the previous GPS initial synchronization method Finally, through the simulation by the GPS simulator, it is seen that the GPS signal of nigh signal-to-noise ratio can be acquired under increased noise floor using the proposed GPS initial synchronization method.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.90-93
• /
• 1999

본 논문에서는 캐리어의 동기가 맞았다는 가정 하에서 초기동기 직렬탐색 방식중의 하나인 Multiple Dwell 방식을 사용하여 각각의 초기동기 평균 획득시간과 분산 값을 비교하였다. 문턱값의 설정은 Maximum Likelihood 방식을 도입하여 MATLAB으로 이론값을 계산하고, 이를 SPW라는 시뮬레이션 툴로 모델링을 하여 시뮬레이션 값과 이론값을 비교 분석하였다. 신호 대 잡음비에 대한 Multiple Dwell 방식의 성능을 비교 분석한 결과. Dwell의 수가 증가할수록 성능은 개선되지만 Dwell의 수가 2일 때가 성능 개선 폭이 가장 컸고 Dwell의 수가 4이상에서는 개선 폭이 아주 작아짐 을 보였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.644-650
• /
• 2001

A remotely located synchronization system which is locked to the remote master clock has been implemented by using GPS Common-View technique. The measurement results showed that the accuracy of the remote synchronization system could be kept within a few parts in $10^{-12}$ and MTIE(Maximum Time Interval Error) met the ITU-T Recommendation(G.811). A prototype system having fully automatic operational functions has been realized up to now and is expected to be used in the network synchronization in the near future.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.235-240
• /
• 2006

In order to enhance receive sensitivity in noisy environment, the previous initial synchronization method of GPS receiver for reference stations adopts not only the coherent integration method but also the non-coherent integration method. However, the previous GPS initial synchronization method causes the non-coherent integration loss, which is a dominant factor among the signal acquisition losses in noisy environment. And the non-coherent integration loss increases with the strength of noise signal. In this pa-per, a GPS initial synchronization method is proposed to enhance receive sensitivity of GPS receiver for reference stations in noisy environment. This paper presents that the proposed GPS initial synchronization method suppresses the non-coherent integration loss. Furthermore, with regard to the mean acquisition time, it is shown that the number of the search cells of the proposed GPS initial synchronization method is much fewer than that of the previous GPS initial synchronization method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.1
• /
• pp.96-102
• /
• 2004

For sensitivity enhancement, the general assisted-GPS acquisition method adopts not only the coherent accumulation technique but also the non-coherent accumulation technique since the long coherent accumulation period increases the number of frequency search cells. But the non-coherent accumulation technique causes tile squaring loss, which is a dominant factor among the acquisition losses of assisted GPS dealing with weak GPS signals. This paper derives the squaring loss of the previous assisted-GPS acquisition method and proposes an assisted-GPS acquisition method for solving the problem of squaring loss in weak signal environment. In this paper, it is explained that the proposed assisted-GPS acquisition method prevents the squaring loss using a coupled coherent accumulation technique and the number of search cells of the proposed assisted-GPS acquisition method is much smaller than that of the previous assisted-GPS acquisition method. Finally, through the simulation by the GPS simulator, the acquisition success rate of the proposed assisted-GPS acquisition method is compared with that of the previous assisted-GPS acquisition method and the acquisition improvements are shown in weak signal environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.2
• /
• pp.185-192
• /
• 2002

A novel GPS initial synchronization scheme with low hardware complexity is proposed. The proposed method has the decomposed differential matched filter, which consists of 25% multiplier and adder of the conventional matched filter. This paper presents the generalized mean acquisition time of initial synchronization scheme with multiple correlator. It is shown that the proposed method, in spite of its low hardware complexity, has the equal performance to the conventional method. The performance of the proposed method is verified through the simulation test by the GPS simulator. It is shown that the proposed method prevents the squaring loss of non-coherent integration.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.7
• /
• pp.629-635
• /
• 2012

This paper presents a performance analysis of the GPS(Global Positioning System) receiver on board in LEO satellites, based on the comparison of its in-orbit performances and corresponding ground test results. An extensive ground tests on the subject GPS receiver has been performed in diverse conditions under the right frame of ground test environments and the analysis of in-orbit performances has also been performed with the huge amount of accumulated GPS data which has been in operation for 6 years since its launch on 2006. For this analysis, we chose three sets of in-orbit data; the data during the early mission period, the data at the 3-year mission completion time, and the most recent in-orbit data. As the performance measures, we selected the position and time synchronization accuracy, and the comparative analysis shows the concurrency between the in-orbit performances and the ground test results with in these performance measures, verifying the validity of the ground test. It is expected that the test configuration and analysis method presented in this paper can be applied to developing and verifying the future Koreanized satellite GPS receivers.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.1
• /
• pp.91-107
• /
• 2003

A 2-dimensional search process in the time and frequency domain is required to acquire the GPS signal, when the code phase and the carrier Doppler for the specified GPS satellite signal are unknown. This paper proposes a new scheme, called Squared-D Searching Method, which can reduce the number of carrier frequency candidates, and a new scheme, named extended Multiple Correlator(XMC), which can reduce the number of code phase candidates. The Squared-D Searching Method can take the twice of Doppler frequency, therefore it can find carrier frequency candidates. The XMC is different from the general multiple correlator in that a combined form of the locally generated codes is used for despreading. Also, this paper tries to analyze a signal detection probability of a GPS receiver under more realistic environments. The result shows that lower detection probability can be obtained when the phase differences among the codes are larger in the correlation arms of a multiple correlator. This phenomenon is not easy to explain with the previous results. And besides, the result shows that proposed acquisition schemes give better performance than a conventional acquisition scheme.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2004

The INS(Inertial Navigation System) provides high rate position, velocity and attitude data with good short-term stability while the GPS(Global Position System) provides position and velocity data with long-term stability. By integrating the INS with GPS, a navigation system can be achieved to Provide highly accurate navigation Performance. For the best performance, time synchronization of GPS and INS data is very important in GPS/INS integrated system But, it is impossible to synchronize them exactly due to the communication and computation time-delay. In this paper, to reduce the error caused by the measurement time-delay in GPS/INS integrated systems, error compensation methods using separate bias Kalman filter are suggested for both the loosely-coupled and the tightly-coupled GPS/INS integration systems. Linearized error models for the position and velocity matching GPS/INS integrated systems are Int derived by linearizing with respect to its time-delay and augmenting the delay-state into the conventional state equations for each case. And then separate bias Kalman Inter is introduced to estimate the time-delay during only initial navigation stage. The simulation results show that the present method is effective enough resulting in considerably less position error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12B
• /
• pp.1037-1041
• /
• 2004

In this paper we propose a new conceptual slave clock system in which remotely located clock is synchronized to the reference clock by intermediation of the satellite time, show a probability of adoption to real network by experiments. This new proposed method has lots of structural advantages over the existing methods because all of the node clocks can be maintained with the same hierarchical quality. The measurement results show that the accuracy of the experimental slave clock system can be kept within a few parts in 1012 and that the MTIE (Maximum Time Interval Error) meets the ITU-T Recommendation G.811 for the primary reference clock A prototype system having fully automatic operational functions has been realized, and it is expected to be commercially used as a node clock for synchronization in the digital communication network in the near future.