• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.65-72
• /
• 2012

With the development of MEMS, small and low-priced sensors integrating IMU and GPS have produced and exploited for diverse field. In this research, we have judged that MEMS-based IMU/GPS sensor is suitable for light-weighted mobile mapping system and carried out experiments to analyze the characteristics of MTi-G, which was developed from XSens company. From a sensor which fixed to dashboard, coordinates results with no post-processing were achieved for test area. On the whole, the results show satisfactory performances but some errors also were discovered from parts of the road due to sensor properties, XKF characteristics and GPS reception environment. We could confirm the potential of light-weighted mobile mapping system. Experiments considering various GPS reception environments and road condition and more detailed level of accuracy analysis will be performed for further research.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.271-275
• /
• 2006

This paper describes the design and realization of full attitude system based on MEMS IMU and GPS carrier phase. The work can be divided into two parts: First, initial heading is determined by using two GPS receivers. And this paper discusses the usage of space geometry conditions to reduce the range of ambiguity search. The method presented in this paper was tested on the static. On the static condition, an accuracy better than 0.06 degrees for heading for 3.48m long baseline has been achieved. Integration of GPS and low cost MEMS IMU are used to realize the real-time heading attitude system. Second, level attitude (pitch and roll) is determined using the method of frequency-velocity for the feedback control. At the same time, the method using the attitude based on MEMS IMU to help determination of the range of ambiguity search is proposed. The results done on the sea show that an alternative means to provide real-time, cost-effective, accurate and reliable attitude information for attitude surveys. Though motivated by a big ships application, the design can be applied to other vehicles.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.235-236
• /
• 2009

실시간 공중 자료획득 시스템은 재난 재해와 같은 긴급 상황에서 빠르게 자료를 취득하여 대상 지역의 정사 영상과 같은 공간정보를 취득하는 시스템이다. 이러한 시스템에서 GPS와 INS는 플랫폼의 위치와 자세정보를 획득 하는데 중요한 역할을 하며 이번 연구에서는 GPS/MEMS IMU 센서의 성능 평가를 실측 데이터를 통하여 실시간 공중 자료획득 시스템에 대한 적합성을 평가하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.249-260
• /
• 2009

The georeferencing accuracy of the sensory data acquired by an aerial monitoring system heavily depends on the performance of the GPS/IMU mounted on the system. The employment of a high performance but expensive GPS/IMU unit causes to increase the developmental cost of the overall system. In this study, we simulate the images and GPS/IMU data acquired by an UAV-based aerial monitoring system using an inexpensive integrated GPS/IMU of a MEMS type, and perform the image georeferencing by applying the aerial triangulation to the simulated sensory data without any GCP. The image georeferencing results are then analyzed to assess the accuracy of the estimated exterior orientation parameters of the images and ground points coordinates. The analysis indicates that the RMSEs of the exterior orientation parameters and ground point coordinates is significantly decreased by about 90% in comparison with those resulted from the direct georeferencing without the aerial triangulation. From this study, we confirmed the high possibility to develop a low-cost real-time aerial monitoring system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.65-72
• /
• 2010

In this study, the performances of a medium grade IMU which is aimed for Mobile Mapping System and a low grade IMU for pedestrian navigation are analyzed through simulations under GPS signal blockage. In addition, an analysis on the accuracy improvement of barometer, electronic compass, or multi-sensor(combination of barometer and electronic compass) to correct medium grade or low grade IMU errors in the situation of GPS signal blockage is performed. With the medium grade IMU, the three dimensional positioning error from INS exceeds the demanded accuracy of 5m when the block time is over 30 seconds. When we correct IMU with barometer, compass, or multi-sensor, however, the demanded accuracy is maintained up to 60 seconds. In addition, barometer is more effective than the electronic compass when they are combined. In case of low grade IMU like MEMS IMU, the three dimensional positioning error from INS exceeds the demanded accuracy of 20m when the block time is over 15 seconds. When we correct INS with barometer, compass, or multi-sensor, however, the demanded accuracy is maintained up to 15 seconds in simulation results. On the contrary to medium grade IMU, electronic compass is more effective than the barometer in case of low velocity such as pedestrian navigation. It is expected that the analysis suggested a method to decrease position or attitude error using aided sensor integration when MMS or pedestrian navigation is operated under 1he environment of GPS signal blockage.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.133-139
• /
• 2007

An unmanned ground vehicle can perform its mission automatically without human control in unknown environment. To move up to a destination in various surrounding situation, navigational information is indispensible. In order to be adopted for an unmanned vehicle, the navigation box is small, light weight and low power consumption. This paper suggests navigation system using a low grade MEMS IMU for supplying position, velocity, and attitude of an unmanned ground vehicle. This system consists of low cost and light weight MEMS sensors and a GPS receiver to meet unmanned vehicle requirements. The sensors are basically integrated by loosely coupled method using Kalman filter and internal algorithms are divided into initial alignment, sensor error compensation, and complex navigation algorithm. The performance of the designed navigation system has been analyzed by real time field test and compared to commercial tactical grade GPS/INS system.

• Journal of Positioning, Navigation, and Timing
• /
• v.1 no.1
• /
• pp.51-57
• /
• 2012

In this paper, design of an error model is presented in which the bias characteristic of the MEMS IMU is taken into consideration for performance enhancement of the MEMS IMU-based GPS/INS integrated navigation system. The drift bias of the MEMS IMU is modeled as a 1st-order Gauss-Markov (GM) process, and the autocorrelation function is obtained from the collected IMU data, and the correlation time is estimated from this. Prior to obtaining the autocorrelation function, the noise of IMU data is eliminated based on wavelet. As a result of simulation, it is represented that the parameters of error model can be estimated correctly only when a proper denoising is performed according to dynamic behavior of drift bias, and that the integrated navigation system based on error model, in which the drift bias is considered, provides more correct navigation performance compared to the integrated navigation system based on error model in which the drift bias is not considered.

• Spatial Information Research
• /
• v.19 no.4
• /
• pp.73-79
• /
• 2011

With the recent increase in demand for geo-registered imagery, Mobile Mapping Systems(MMS), which can quickly construct geographic information, has become important. The main part of MMS is the high-precision observation system, which collects geographic information at a certain speed. MMS has a complex data generation process and requires a standard-specific vehicle for its use, limiting its application range. In this paper, lightweight MMS is proposed to overcome its complexity by replacing the time synchronizer with a high-speed camera and by stabilizing motion with MEMS IMU/GPS. The proposed low-cost, portable method is expected to produce of geo-registered imagery efficiently.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.225-234
• /
• 2009

Real-time Aerial Monitoring System (RAMS) is to perform the rapid mapping in an emergency situation so that the geoinformation such as orthophoto and/or Digital Elevation Model is constructed in near real time. In this system, the GPS/INS plays an very important role in providing the position as well as the attitude information. Therefore, in this study, the performance of an IMU sensor which is supposed to be installed on board the RAMS is evaluated. And the integration algorithm of GPS/INS are tested with simulated dataset to find out which is more appropriate in real time mapping. According to the static and kinematic results, the sensor shows the position error of 3$\sim$4m and 2$\sim$3m, respectively. Also, it was verified that the sensor performs better on the attitude when the magnetic field sensor are used in the Aerospace mode. In the comparison of EKF and UKF, the overall performances shows not much differences in straight as well as in curved trajectory. However, the calculation time in EKF was appeared about 25 times faster than that of UKF, thus EKF seems to be the better selection in RAMS.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1762-1763
• /
• 2011

자동차 블랙박스는 자동차의 사고 전/후의 주행상태를 저장하여 사고의 원인을 규명하는데 사용된다. 사고 발생 시의 자동차의 주행상태를 정확히 기록하기 위해서는 자동차의 위치와 속도에 대한 정보도 필요하므로 자동차 블랙박스에서는 위치/속도 정보를 제공하기 위한 항법 시스템이 필요하다. 본 논문에서는 GPS 수신기와 MEMS 기반의 IMU를 사용하는 자동차 블랙박스용 항법 시스템을 설계하고 그에 대한 성능평가 결과를 제시하고자 한다.