• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.39-44
• /
• 2004

In this thesis, two test flights were conducted in Gwacheon and Suwon area to evaluate the performance of accuracy and efficiency through the analysis of results among the three photogrammetric methods, that is, traditional photogrammetry, GPS -Photogrammetry and GPS/INS-Photogrammetry. Test results shows that a large variety of advantages of GPS-Photogrammetry and GPS/INS-Photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70-80%, and the cost for map production 30-50%, respectively. In addition, it was convinced that the large reduction of control points has not any effect on the block accuracy. It was also proved that the number of required ground control points for GPS/INS-Photogrammetry, is similar to that of GPS-Photogrammetry. Therefore it should be noted that GPS -Photogrammetry is more efficient in the aspect of reduction of mapping cost against GPS/INS-Photogrammetry, installing only an existing GPS receiver on survey aircraft to avoid high economic burden of procurement for integrated GPS/INS equipment.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.151-158
• /
• 2006

As GPS 'selective availability' was turned off in 2000, GPS related fields and markets are explosively extended. In mapping area, GPS/INS aided photogrammetry proved it is much cost and time effective method keeping enough accuracy as compared with traditional photogrammetry works. The advantage of GPS/INS integration is interdependence. Even if GPS signal was blocked in some time, the position accuracy is not affected. In this study, various GPS signal time gap was used in GPS/INS AT process. Field surveyed ground points were used in accuracy check with GPS/INS AT check points. And the result showed enough accuracy of photogrammetry work rule of NGII. y.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.285-291
• /
• 2004

GPS photogrammetry or the GPS/INS photogrammetry, which are based on the direct measurement of the projection centers and attitude at the moment of camera exposure time through loading the GPS receiver or INS in aircraft. Both photogrammetric methods can offer us to acquire the exterior orientation parameters with only minimum ground control points, even the ground control process could be completely skipped. Consequently, we can drastically reduce the time and cost for the mapping process. In this thesis, test flight was conducted in Suwon area to evaluate the performance of accuracy and efficiency through the analysis of results among the three photogrammetric methods, that is, traditional photogrammetry, GPS photogrammetry and GPS/INS photogrammetry. Test results shows that a large variety of advantages of GPS photogrammetry and GPS/INS photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70～80%, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.53-62
• /
• 2004

This paper deals with a new approach to acquire the exterior orientation parameters based on GPS(Global Positioning System) in combination with IMU(Inertial Measuring Unit), which enables us to achieve the same accuracy with minimal ground control points comparing to the conventional photogrammetric method. To prove the possibility of practical use of GPS/INS photogrammetry, a survey flight was conducted loading with all necessary photographing systems. The observed data set by GPS/IMU were analyzed and verified :he accuracy performance of kinematic GPS, and also compared to those of conventional photogrammetry in various points of view.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.43-48
• /
• 2008

In this study, it was estimated efficiency of GPS/INS photogrammetry by comparison of accuracy and economical efficiency between conventional aerial triangulation and GPS/INS aerial triangulation at the base of large scale digital mapping using GPS/INS aerial survey. The results of aerial triangulation with GPS/INS showed that 40% of working amount was reduced in the process of ground control point survey compared to conventional aerial triangulation. In case of 1/5000 scale aerial triangulation, the results showed that 55% GCP work was reduced in 10 and 20 block size, and 60% GCP work was reduced in 30 block size, under the assumption of keeping the same accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.293-298
• /
• 2014

Recently, the direct georeferencing has been becoming a common method in the aerial photogrammetry. As this direct georeferencing method using converged sensor of the digital photogrammetry camera and GPS(Global Positioning System)/INS(Inertial navaigation System), more rapid and accurate aerial photogrammetry has improved following advanced performance in photogrammetry. Since the accuracy of EO parameters from the direct georeferencing is determined by GPS/INS accuracy, it is significant to calculate the exact attitude information using values of INS rotations. For following calculations, the misalignment, such as INS rotation and the gap of GPS/INS, has to be decided. Because the number of ground control points are used for tirangulation and boresight calibration, those results should be different according to array and location of ground control points. In the study, those location and array of ground control points were tested to be used boresight calibration. As a result, there is no significant change of misalignment and exterior orienation parameters in the case when ground control points were at all course. On the contrarily, the difference has been shown in the case of no ground control point at course.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.02a
• /
• pp.47-54
• /
• 2004

In order to meet the users demand, who needs faster and more accurate data in geographic information it is necessary to obtain and process the data more effectively. Now more effective data obtainment about geographic information is possible through the development of unified technology, which is applied to the field of geographic information, as well as through the development of hardware and software engineering. With the fast and precise correction and update, the development of unified technology can bring the reduction of the time and money. For the obtainment of geographic information which can meet the demand of the users, the unified technology has been applied to various fields, and in Aerial Photogrammetry field, many are doing researches actively for the GPS/INS unified system. To obtain fast and precise geographic information using Aerial Photogrammetry method, it is necessary to develop Airborne GPS/INS unified system, which makes GCP to the minimum. For this reason, this study has tried to develop a system which could unite and process both GPS and INS data. For this matter, code-processing module for DGPS and OTF initialization module, which can decide integer ambiguity even in motion, have been developed. And also, continuous kinematic carrier-processing module has been developed to calculate the location at the moment of filming. In addition, this study suggests a possibility of using a module, which can unite GPS and INS, using Kalman filtering, and also shows the INS navigation theory.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.6
• /
• pp.599-606
• /
• 2014

Since the accuracy of Global Positioning System (GPS)-based vehicle positioning system is significantly degraded or does not work appropriately in the urban canyon, the integration techniques of GPS with Inertial Navigation System (INS) have intensively been developed to improve the continuity and reliability of positioning. However, its accuracy is degraded as INS errors are not properly corrected due to the GPS signal blockage. Recently, the image-based positioning techniques have been started to apply for the vehicle positioning for the advanced in processing techniques as well as the increased the number of cars installing the camera. In this study, Single Photo Resection (SPR), which calculates the camera exterior orientation parameters using the Ground Control Points (GCPs,) has been integrated with the INS/GPS for continuous and stable positioning. The INS/GPS/SPR integration was implemented in both of a loosely and a tightly coupled modes, based on the Extended Kalman Filter (EKF). In order to analyze the performance of INS/SPR integration during the GPS outage, the simulation tests were conducted with a consideration of factors affecting SPR performance. The results demonstrate that the accuracy of INS/SPR integration is depended on magnitudes of the GCP errors and SPR processing intervals. Additionally, the simulation results suggest some required conditions to achieve accurate and continuous positioning, used the INS/SPR integration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.531-537
• /
• 2010

Real-time Aerial Monitoring System performs the rapid mapping in an emergency situation so that the geoinformation could be constructed in near real time. In this system, the position and attitude information from GPS/INS integration algorithm is used to perform the aerial triangulation(AT) without GCPs. Therefore, if we obtain Exterior Orientation(EO) estimates from AT sequentially, EO are used as the measurements in the Kalman filter. In this study, we simulate the GPS/IMS/Image data for an UAV-based aerial monitoring system and compare the GPS/INS/AT with and without from AT. Comparative analysis showed that result from the GPS/INS/AT with EO update is more accurate than without the update. However, when the vehicle turns, the position error significantly increases which need more analysis in the future.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.455-458
• /
• 2007

Currently, aortal surveying is getting advanced in the world. New digital equipment for aerial surveying makes improvement of accuracy, economical efficiency and reduces cost. for a result, however, there are required to produce a accurate product. In this study, we used two kinds of data, the one which used only GPS/INS data and the other one which used GPS/INS data added on GCPs from digital maps, and made as a mosaic to compare both of them whether which one is better based on digital maps. the result is that the data which used GPS/INS data added on GCPs from digital maps was a lot better than GPS/INS data.