• ETRI Journal
• /
• v.8 no.3
• /
• pp.97-108
• /
• 1986

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.555-562
• /
• 2007

In this paper we present a system architecture for the distributed measurement system of instrumentation over the network. The proposed architecture allows remote control & monitoring of the instrument by using web browser.

• Electrical & Electronic Materials
• /
• v.3 no.2
• /
• pp.123-130
• /
• 1990

본 논문은 페라이트의 온도특성을 측정하기 위한 다중측정시스템의 설계에 관하여 연구한 것이다. 본 시스템은 전기로의 온도를 제어하기 위한 열전대 콘트롤러, 릴레이 동작을 제어하기 위한 릴레이 콘트롤러 및 릴레이를 구동시키기 위한 스윗칭부, 그리고 GPIB를 이용한 LCR메터 제어부와 이들을 마이크로 컴퓨터와 통신하기 버스 라인으로 구성하였다. 열전대 콘트롤러와 릴레이 콘트롤러는 8255A(Intel LSI)를 주로 이용하여 설계하였으며 릴레이로는 고주파용 릴레이를 사용하여 스윗칭 트랜지스터로 구동시키는 방법을 택하였다. 그리고 LCR-메터에는 GPIB(AD50488)보드를 사용하였다. 측정시료로서는 복합첨가제방식에 의하여 제작된 Mn-Zn-Fe계 페라이트의 시편을 사용하였으며 시료의 특성측정은 자체 제작한 자동계측시스템을 이용하여 분석하였다. 측정결과 온도보상점 T$_{o}$ 와 큐리온도 T$_{c}$ 바로 아래에서 투자율의 급격한 변화를 확인할 수 있었다. 그리고 특성의 계측에 있어서 일관성이 있고 정확한 자료를 얻을 수 있었으며 따라서 본 시스템이 인터페이스와 컴퓨터 사이의 연결성이 좋은 자동다중계측시스템으로 활용 할 수 있음을 확인한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.821-823
• /
• 2003

We have developed the evaluation program using LabVIEW for the high power laser measurement system.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.7
• /
• pp.65-72
• /
• 2009

Laser interferometry is widely used as a measuring system in many fields because of its high resolution and its ability to measure a broad area in real-time all at once. In conventional laser interferometry, for example out-of-plane ESPI (Electronic Speckle Pattern Interferometry), in plane ESPI, shearography and holography, it uses PZT or other components as a phase shift instrumentation to extract 3-D deformation data, vibration mode and others. However, in most cases PZT has some disadvantages, which include nonlinear errors and limited time of use. In the present study, a new type of laser interferometry using a laser diode is proposed. Using Laser Diode Sinusoidal Phase Modulating (LD-SPM) interferometry, the phase modulation can be directly modulated by controlling the laser diode injection current thereby eliminating the need for PZT and its components. This makes the interferometry more compact. This paper reports on a new approach to the LD (Laser Diode) Modulating interferometry that involves four-frame phase shift method. This study proposes a four-frame phase mapping algorithm, which was developed to have a guaranteed application, to stabilize the system in the field and to be a user-friendly GUI. In this paper, the theory for LD wavelength modulation and sinusoidal phase modulation of LD modulating interferometry is shown. Using modulating laser and research of measurement algorithm does comparison with existent ESPI measurement algorithm. Algorithm measures using GPIB communication through most LabVIEW 8.2. GPIB communication does alteration through PC. Transformation of measurement object measures through modulating laser algorithm that develops. Comparison of algorithm of modulating laser developed newly with existent PZT algorithm compares transformation price through 3-D. Comparison of 4-frame phase mapping, unwrapping, 3-D is then introduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1754-1766
• /
• 1993

The application of VXIbus system, an Industry standard, is rapidly spreading with its ability to offer the easiness of integration from GPIB and the fast data transmission from VMEbus system. Compared with VXIbus Register Based Device, VXIbus Message Based Device has a drawback In the aspect of speed. But it is possible to utilize high level ASCII commands to control a Message Based Device, therefore system integration is much easier with Message Based Device than with Register Based Device. And, the FFT analyzer is an instrument for signal analysis which can be inexpensively implemented to be fast and have high resolution. Its wide ability of analysis presents numerous application. So, it is necessary to apply VXIbus system to FFT analyzer. In this paper, the implementation of FFT analyzer is performed using a DSP module and by implementing all A/D conversion circuit and a control module which performs VXIbus interface. The device can be controlled by Slot0 Commender which supports VXIbus Shared Memory Protocol through VXIbus.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.380-385
• /
• 2006

In this paper, a program that can be utilized to measure and analyze radio propagation characteristics is developed. This program is able to control the measurement instruments including spectrum analyzer through GPIB interface and analyze the measured data to yield mean excess delay and RMS delay spread. The measured path loss can be compared with theoretical value in free space or inside a tunnel. The measured and analyzed results can also be presented in the forms of graphs. As these tasks can be conducted on the spot of the measurements, this program is very helpful in performing and verifying the measurements immediately. In this thesis radio propagation characteristics with frequency bands of 2.45 and 5.8GHz in subway tunnels are measured by using the program. Path loss and delay spread in subway tunnel is measured and compared according to the form of antenna beam and LOS(Line of Sight) and N-LOS(Non-Line of Sight).

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.171-179
• /
• 2007

The Test Equipment for the upper stage of KSLV-I has following functions via umbilical cable interface; external power supply, command output such as discrete and analog, data acquisition, CS-I interface simulation for first stage of KSLV-I and RS-422 serial communication for PDU. The main purpose of UTE is the experiment or function verification of system-level upper stage. To realize this system, we used PXI control system. The UTE is consisted of the PXI control system, power supply, terminal block, internal harness, connector panel and so on. The software functions of UTE are classified by four blocks. These are Discrete/Analog I/O control, PDU RS-422 serial communication control, power supply GPIB control and UTE remote control. In this paper, we will describe the design on the hardware and software of UTE.

• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.399-409
• /
• 2002

A system software on-line spectral analysis of atomic emission spectrometer. The system program consisted of a control part for the optical instruments and the spectrum analysis part the artificial intelligence method to reduce nonlinear error of the wavelengths. McPHERSON 207 Monochromator controlled GPIB communication protocol, and the detector signal was measured from PMT by using A/D Amplifier that was made by Photon_Tek. co.. HNN(Hybrid Neural Network) of artificial intelligence technique was applied to the qualitative analysis of P, Cu, Fe, Cr, and that was accurately applied to the quantitative analysis of Cd with 10 ppb level better than the conventional methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.132-133
• /
• 2005

고분자 절연재료의 혼합사용을 통한 계면의 전기적 특성 및 온도 특성을 조사하기 위하여 XLPE층 과 EPDM 층을 각각 단일층 및 이중층으로 적층하였으며, 온도는 상온에서 100 [$^{\circ}C$]까지 변환시키면서 유전정접을 측정하였다. 또한 data는 LABview를 이용하여 GPIB통신으로 받아들인 값을 평균치를 구하여 컴퓨터에 저장하였다. 측정결과 온도에 무관하게 이층구조는 단일층 사이의 값을 나타내며, 온도증가에 따라 XLPE 단일층의 변화가 크게 나타났으며, 이중층은 EPDM의 변화에 크게 의존함을 확인할 수 있었다.